

DAQ device based on USB communication and equipped with 96 digital inputs / outputs and a counter input. The module provides 96 DIO channels that are configured as eight banks of eight ports and eight banks of four ports. Each port can be independently configured as input or output. The device is designed to emulate the 0 82C55 mode. The digital outputs are high-drive TTL which can draw 24 mA / sink 64 mA. Digital I/O lines are accessed via screw terminals on the USB-DIO96H. It is housed in a rugged metal housing that users can mount on a DIN rail.
Extensive software support includes DAQami - an optional out-of-the-box data capture, visualization and signal generation application. Data can be viewed in real time or after acquisition on user-configurable screens. Drivers for the most popular applications and programming languages are also included, including Visual C++, Visual C#, Visual Basic.NET, DASYLab, LabVIEW, MATLAB, and Python.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
USB based DAQ device with 8 SE/4 DIFF analog inputs, up to four analog outputs, 16 digital inputs/outputs and one 32-bit counter. It offers 13-bit resolution and a sampling rate of 1 MS/s. Digilent 6069-410-017
No product available!
DAQ device based on USB communication and equipped with 8 single-ended or 4 differential analog inputs, 2 analog outputs, 16 digital inputs/outputs and one 32-bit counter. It offers 12-bit resolution and a sampling rate of 50 kS/s per channel. Digilent 6069-410-061
No product available!
DAQ device based on Ethernet communication and equipped with 24 digital inputs/outputs and a counter input. It allows you to control devices via the Internet. Digilent 6069-410-052
No product available!
32-channel IO expander with 7 analog inputs. It communicates via the USB interface. Enclosure included. Numato Lab GP320001E
Micro:Mate is an expansion board for the micro: bit development module. It provides six 3-pin connectors with I/O outputs, a 3.5mm audio jack connector and is powered from a 5V microUSB connector. DFRobot DFR0518
No product available!
4-channel PCIe port expander. It can be powered with 12 V via a PCIe connector or an external DC connector. Waveshare PCIe-Packet-Switch-4P
Module with 8 inputs for data acquisition from 0-24 mA analog current inputs. It communicates via RS485 interface and supports Modbus RTU protocol. The board is enclosed in an industrial enclosure. GM1008
16-channel GPIO expander with an I2C interface microcontroller can interface with 16 fully configurable digital input/output pins. It can produce PWM signals, so you can dim LEDs. It can be set to blink or even breathe pins at varying rates. With a built-in keypad engine, it can interface with up to 64 buttons set up in an 8x8 matrix. BOB-13601
No product available!
16-channel PoE GPI/GPO module enabling connection of a PC to other electronic circuits via a network. It does not need a separate cable for power and data transmission. It can be controlled via a simple web interface or Telnet. Numato Lab NLGP1001-A
No product available!
Module with 8-channel PCF8574 IO expander controlled by the I2C interface. Equipped with a STEMMA QT connector. Adafruit 5545
Module with 8 analog inputs for voltage measurement in the range from 0 to 10 V. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP3084ADAM
Module with three 4-20 mA analog outputs. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP3078ADAM
Module with 16-channel PCF8575 IO expander controlled by the I2C interface. Equipped with a STEMMA QT connector. Adafruit 5611
Module with 16 digital inputs. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP8026ADAM
KAmod I2C-Mini Out8 enables easy expansion of microprocessor systems with eight switching outputs for voltages and currents typical of low-voltage load control. Compatibility with the I2C bus and the ability to connect up to 8 modules in a single network make it an ideal solution for automation systems, lighting and power control, and other applications requiring flexible control of multiple circuits.
A 24-channel input/output port expander module controlled by an I2C interface. It was based on the CH423 chip and equipped with a Gravity connector. DFRobot DFR0979
128-channel IO expander with 32 analog inputs. It communicates via the USB interface. Numato Lab GP1280001
No product available!
An 4-channel I2C expander module, which is based on the TCA9546A chip. It allows connecting several devices with the same address to a single I2C interface. Adafruit 5664
No product available!
16-channel IO expander with 14 analog inputs. Communicates via the WiFi wireless interface. Numato Lab GPWIFI160001
No product available!
DAQ device based on USB communication and equipped with 96 digital inputs/outputs and a 32-bit counter. Digilent 6069-410-032