![LIS3DH Triple-Axis Accelerometer (+-2g/4g/8g/16g)](https://kamami.pl/71571-large_default/lis3dh-triple-axis-accelerometer-2g4g8g16g.jpg)
![LIS3DH Triple-Axis Accelerometer (+-2g/4g/8g/16g)](https://kamami.pl/71571-large_default/lis3dh-triple-axis-accelerometer-2g4g8g16g.jpg)
zł22.19 tax excl.
This sensor communicates over I2C or SPI (our library code supports both) so you can share it with a bunch of other sensors on the same I2C bus. Adafruit 2809
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
The LIS3DH is a very popular low power triple-axis accelerometer. It's low-cost, but has just about every 'extra' you'd want in an accelerometer. This sensor communicates over I2C or SPI (our library code supports both) so you can share it with a bunch of other sensors on the same I2C bus. There's an address selection pin so you can have two accelerometers share an I2C bus.
To get you going fast, we spun up a breakout board for this little guy. Since it's a 3V sensor, we add a low-dropout 3.3V regulator and level shifting circuitry on board. That means its perfectly safe for use with 3V or 5V power and logic. It's fully assembled and tested. Comes with a bit of 0.1" standard header in case you want to use it with a breadboard or perfboard. Two 2.5mm (0.1") mounting holes for easy attachment.
MEMS digital output motion sensor ultra low-power high performance 3-axes "nano" accelerometer, LGA16, STM, RoHS
KAmodLSM6DS3 is a module that allows measurement of acceleration and angular velocity values. It has a built-in voltage stabilizer and level translators on SDA / SCL lines, thanks to which it can be used in 2.5-5.5V voltage systems
Module with a 3-axis BMA220 digital accelerometer with a configurable measuring range of ± 2/4/8/16 g. It is supplied with the voltage from 2 to 3.6 V and communicates via the I2C or SPI interface. DFRobot SEN0168
Module with a 3-axis KX134 accelerometer. The system has a user selectable measurement scale of ±8/±16/±32/±64 g. There are two Qwiic connectors on the board and holes with a 2.54 mm pitch. SparkFun SEN-17589
No product available!
No product available!
Module with a 3-axis LIS331HH accelerometer with a configurable measuring scale of ± 6g/±12g/±24g. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4626
GY-346 is a module with a digital acceleration sensor (accelerometer) ADXL346; communication on the I2C / SPI bus
Module with the LIS2DW12 3-axis accelerometer. The system has a user selectable measurement scale of ± 2g/±4g/±8g/±16g. It communicates via the I2C interface. DFRobot SEN0405
KAmodLIS35DE is a module with a three-axis LIS35DE accelerator from STMicroelectronics. The chip has a digital signal output (I2C or SPI bus) and allows acceleration measurement in three axes.
KAmodMMA8653FC is a module with NXP's MMA8653FC three-axis accelerometer. The sensor allows the measurement of acceleration in the range of ± 2g / ± 4g / ± 8g, the measurement frequency is from 1.56 Hz to 800 Hz. Communication with the sensor takes place via the I2C interface
Module with a 3-axis H3LIS200DL accelerometer. The system has a user selectable wide measurement scale of ±100g/±200g. There is a Gravity connector on the board. DFRobot SEN0412
Module with the LIS3DHTR 3-axis accelerometer. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 114020121
MMA8451 Triple-Axis Accelerometer w/ 14-bit ADC, detects motion, tilt and basic orientation, wide usage range: from +-2g up to +-8g, easy to use with Arduino or another microcontroller. Adafruit 2019.
This sensor communicates over I2C or SPI (our library code supports both) so you can share it with a bunch of other sensors on the same I2C bus. Adafruit 2809