LIS3DH Triple-Axis Accelerometer (+-2g/4g/8g/16g)
ID: 561049
5906623429110
zł24.71
Tax included
zł20.09 tax excl.
This sensor communicates over I2C or SPI (our library code supports both) so you can share it with a bunch of other sensors on the same I2C bus. Adafruit 2809
Description
The LIS3DH is a very popular low power triple-axis accelerometer. It's low-cost, but has just about every 'extra' you'd want in an accelerometer. This sensor communicates over I2C or SPI (our library code supports both) so you can share it with a bunch of other sensors on the same I2C bus. There's an address selection pin so you can have two accelerometers share an I2C bus.
To get you going fast, we spun up a breakout board for this little guy. Since it's a 3V sensor, we add a low-dropout 3.3V regulator and level shifting circuitry on board. That means its perfectly safe for use with 3V or 5V power and logic. It's fully assembled and tested. Comes with a bit of 0.1" standard header in case you want to use it with a breadboard or perfboard. Two 2.5mm (0.1") mounting holes for easy attachment.
Features
- Three axis sensing, 10-bit precision
- ±2g/±4g/±8g/±16g selectable scaling
- Both I2C (2 possible addresses) and SPI interface options
- Interrupt output
- Multiple data rate options 1 Hz to 5Khz
- As low as 2uA current draw (just the chip itself, not including any supporting circuitry)
- Tap, Double-tap, orientation & freefall detection
- 3 additional ADC inputs you can read over I2C
- Dimensions: 20.62mm x 20.32mm x 2.6mm / 0.8" x 0.8" x 0.1"
- Weight: 1.5g
561049
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
MEMS digital output motion sensor ultra low-power high performance 3-axes "nano" accelerometer, LGA16, STM, RoHS
zł8.27
24h
Available quantity: 205
Available
KAmodLSM6DS3 is a module that allows measurement of acceleration and angular velocity values. It has a built-in voltage stabilizer and level translators on SDA / SCL lines, thanks to which it can be used in 2.5-5.5V voltage systems
zł27.48
24h
Available quantity: 119
Available
Other products in the same category (16)
Module with a 3-axis LIS331HH accelerometer with a configurable measuring scale of ± 6g/±12g/±24g. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4626
zł64.03
4 weeks
No product available!
Set of sensors with cables. They can detect gestures, movement, touch, sound, and measure humidity, temperature, altitude and acceleration. SparkFun DEV-16156
zł815.50
3 weeks
No product available!
KAmodMMA7361LC is an accelerometer module with an analogue output, equipped with the MMA7361LC chip. It has a embedded voltage regulator, so it can be used in systems supplied with voltage of 2.5...5.5V.
zł28.91
24h
Available quantity: 192
Available
Module with a 3-axis MSA311 accelerometer with a configurable measuring range of ±2g/±4g/±8g/±16g. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5309
zł25.90
24h
Available quantity: 2
Available
Triple-Axis Accelerometer Module +-3g, Analog-Output, RoHS
zł29.69
24h
Available quantity: 5
Available
Module with a 3-axis LIS331HH accelerometer. The system has a user selectable measurement scale of ±6g/±12g/±24g. It communicates via the I2C interface. DFRobot SEN0407
zł56.35
4 weeks
No product available!
Module with 3-axis digital accelerator ADXL345, SPI and I2C communication.
zł13.70
24h
Available quantity: 25
Available
The LIS3DH 12-bit 3-axis capacitive accelerometer module is a great tool for motion detection in your projects, capturing accelerations in three axes (3DoF). Simple configuration with SPI or I2C interface, as well as the ability to work on a breadboard, make the module user-friendly and perfect for various applications, from robotics to wearable devices. SparkFun SEN-20659
zł36.43
24h
Available quantity: 2
Available
KAmodMC3635 is a module with the MC3635 three-axis accelerometer from mCube. The sensor allows the measurement of acceleration in the range of ±2g/±4g/±8g/±12g/±16g, the measurement frequency is from 14 to 1300 Hz. Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMC3635
zł14.90
24h
Available quantity: 453
Available
KAmodLIS35DE is a module with a three-axis LIS35DE accelerator from STMicroelectronics. The chip has a digital signal output (I2C or SPI bus) and allows acceleration measurement in three axes.
zł19.90
24h
Available quantity: 462
Available
Module with a 3-axis accelerometer with a resolution of 13bit (ADXL345), RoHS
zł12.62
24h
Available quantity: 3
Available
Module with a 3-axis H3LIS331 accelerometer with a wide measurement range up to ± 400g. It communicates via the I2C or SPI interface. SparkFun SEN-14480
zł90.64
24h
Available quantity: 2
Available
Module with the LIS3DHTR 3-axis accelerometer. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 114020121
zł24.06
24h
Available quantity: 2
Available
Module with the LIS2DW12 3-axis accelerometer. The system has a user selectable measurement scale of ± 2g/±4g/±8g/±16g. It communicates via the I2C interface. DFRobot SEN0405
zł20.09
24h
Available quantity: 3
Available
Module with a 3-axis BMA220 digital accelerometer with a configurable measuring range of ± 2/4/8/16 g. It is supplied with the voltage from 2 to 3.6 V and communicates via the I2C or SPI interface. DFRobot SEN0168
zł20.22
24h
Available quantity: 2
Available
BMA400 3-axis accelerometer module with a measurement range of up to ±16g. The board is equipped with a Qwiic connector and communicates via an I2C or SPI interface. SparkFun SEN-21208
zł49.53
3 weeks
No product available!
This sensor communicates over I2C or SPI (our library code supports both) so you can share it with a bunch of other sensors on the same I2C bus. Adafruit 2809