

zł82.45 tax excl.
Driver enabling operation of displays with an RGB-666 connector with resolutions from 480x272 to 800x600 pixels. Equipped with an ESP32-S3 microcontroller with 16 MB Flash memory and 8 MB PSRAM memory. Powered and programmable via USB Type-C connector. Adafruit 5800
A modern driver for RGB TTL displays that provides unique capabilities in handling large displays with various resolutions and formats. This innovative product is perfect for both professionals and hobbyists who want to use the potential of large displays in their projects. S
The driver enables support for displays with resolutions from 480x272 to 800x480, 800x600 and even 720x720 pixels. This means you can use it in projects that require detailed graphics, images, animations and even video. It uses the ESP32-S3 microcontroller and is equipped with enough PSRAM to cache large images. Thanks to this, you will get smooth and fast screen refreshing, which is crucial in the case of high-resolution displays. Thanks to the built-in RGB display chip, you can display both graphics and video with virtually instantaneous screen refreshing approximately every 30 frames per second.
The module is adapted to popular displays with a standard 40-pin RGB-666 connector. It is a commonly used standard in square, round and rectangular displays. The board is powered by a USB Type-C connector and communication takes place via the USB port. There is also a UART port for debugging purposes.
The driver enables touch layer support on selected displays, which adds additional possibilities for user interaction. Thanks to the integrated I/O expander, various modules and sensors can be added, making this controller a universal tool in IoT projects. The module is compatible with popular programming platforms such as Arduino and CircuitPython, which makes it easier to develop applications. The controller will be used in projects such as interactive control panels, multimedia devices, car navigation, automation and many others. It opens new possibilities in the design of devices using large displays, without the need to use expensive solutions.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Rectangular TFT display with capacitive touch panel. It has a 4-inch screen with a resolution of 720x720 pixels. It uses the ST7701S controller. To control it, it requires a system with high computing power and an appropriate amount of memory. Adafruit 5794
No product available!
Round TFT display with a diagonal of 2.1" and a resolution of 480x480 pixels. Uses the ST7701S controller. For control, it requires a system with high computing power and an appropriate amount of memory. Adafruit 5806
No product available!
Rectangular TFT display with capacitive touch panel. It has a 3.2" screen with a resolution of 320x820 pixels. It uses the ST7701S controller. For control, it requires a system with high computing power and an appropriate amount of memory. Adafruit 5797
Rectangular TFT display with a 3.2" screen and a resolution of 320x820 pixels. It uses the ST7701S controller. For control, it requires a system with high computing power and an appropriate amount of memory. Adafruit 5828
No product available!
Touch panel for displays with a diagonal of 5.6 ", 126.5x101mm, resistive touchpanel, tape for ZIFF 4 1mm connector
Touchpanel for 128x64 A-series displays, 81.8x52.2mm, 2.54 mm IDC connector
No product available!
The driver for e-Paper displays with a built-in ESP32 module that provides communication via WiFi and Bluetooth. The board allows you to display images on e-Paper displays from a computer or smartphone. Waveshare e-Paper ESP32 Driver Board
The driver with the TPIC6C596 system allows you to control 7-segment displays using three signal lines. Serial connection of controllers is possible. SparkFun WIG-13279
The expansion module (shield) is designed for Arduino boards. It enables easy connection of 16x32 and 32x32 matrix displays. Requires self-assembly. Adafruit 2601
FFC tape enabling seamless connection of DSI displays with the Raspberry Pi 5 minicomputer. Black EMI shielding foil on both sides of the tape increases anti-interference efficiency, protecting signals against interference from the environment. Waveshare Pi5-Display-Cable-500mm
No product available!
Driver for e-Paper displays in the form of an overlay for Arduino and Nucleo. The SPI interface is used for communication with the controller. Waveshare e-Paper Shield
No product available!
Extension module dedicated to matrix displays with HUB75 interface. Designed for Feather RP2040, M0 and M4 series tiles. Adafruit 3036
This is a very special adapter, specifically used for adapting our RTD266X driver boards that have 50-pin TFT connectors to use 40-pin TFTs. Please note the adapter cannot be used the other way around! As an addition, we add in an AR1100 resistive touch controller. Adafruit 3305
No product available!
7" Capacitive Touch Panel Overlay for LattePanda V1.0 IPS Display
Plastic semi-circular lens with an outer diameter of 40 mm. Adafruit 3853
No product available!
Module with I2C driver based on the HT16K33 system. It is equipped with STEMMA QT connectors and is dedicated to 8x8 LED matrix displays with a diagonal of 1.2". Adafruit 1048
Module with connector designed for 40-pin TFT displays. It allows for simple connection of the display and control using pin-outs with a convenient raster. Adafruit 1932
FFC tape enabling seamless connection of DSI displays with the Raspberry Pi 5 minicomputer. EMI shielding foil on both sides of the tape increases anti-interference efficiency, protecting signals against interference from the environment. Waveshare Pi5-Display-Cable-300mm
The expansion module (shield) is designed for Feather nRF52840 boards. It enables easy connection of 16x32, 32x32 and 64x32 matrix displays. Requires self-assembly. Adafruit 4702
TFT LCD driver with DPI interface dedicated to Raspberry Pi. It allows you to operate resistive touch panels. Adafruit 2453
Driver enabling operation of displays with an RGB-666 connector with resolutions from 480x272 to 800x600 pixels. Equipped with an ESP32-S3 microcontroller with 16 MB Flash memory and 8 MB PSRAM memory. Powered and programmable via USB Type-C connector. Adafruit 5800