LCD-AG-TP-TFT5i6 PBF

FFC tape enabling seamless connection of DSI displays with the Raspberry Pi 5 minicomputer. EMI shielding foil on both sides of the tape increases anti-interference efficiency, protecting signals against interference from the environment. Waveshare Pi5-Display-Cable-300mm

The expansion module (shield) is designed for Teensy 4.0 and Teensy 4.1 boards. It allows you to easily connect displays from the SmartMatrix series. Adafruit 4828

7" Capacitive Touch Panel Overlay for LattePanda V1.0 IPS Display

The driver with the TPIC6C596 system allows you to control 7-segment displays using three signal lines. Serial connection of controllers is possible. SparkFun WIG-13279

Driver enabling operation of displays with an RGB-666 connector with resolutions from 480x272 to 800x600 pixels. Equipped with an ESP32-S3 microcontroller with 16 MB Flash memory and 8 MB PSRAM memory. Powered and programmable via USB Type-C connector. Adafruit 5800

An expansion board equipped with a 24-pin FPC connector, designed for the SeeedStudio XIAO series boards. Enables smooth control of the ePaper display. Seeed Studio 105990172

Module with connector designed for 40-pin TFT displays. It allows for simple connection of the display and control using pin-outs with a convenient raster. Adafruit 1932

FFC tape enabling seamless connection of DSI displays with the Raspberry Pi 5 minicomputer. Black EMI shielding foil on both sides of the tape increases anti-interference efficiency, protecting signals against interference from the environment. Waveshare Pi5-Display-Cable-500mm

Extension module dedicated to matrix displays with HUB75 interface. Designed for Feather RP2040, M0 and M4 series tiles. Adafruit 3036

TFT LCD driver with DPI interface dedicated to Raspberry Pi. It allows you to operate resistive touch panels. Adafruit 2453

The expansion module (shield) is designed for Feather nRF52840 boards. It enables easy connection of 16x32, 32x32 and 64x32 matrix displays. Requires self-assembly. Adafruit 4702

Plastic semi-circular lens with an outer diameter of 40 mm. Adafruit 3853

The expansion module (shield) is designed for Arduino boards. It enables easy connection of 16x32 and 32x32 matrix displays. Requires self-assembly. Adafruit 2601

Extension module dedicated to matrix displays with HUB75 interface. Designed for minicomputers Raspberry Pi. Adafruit 3211

The LED_CGG128064M-XXW is a white LED backlight designed for COG displays of the "CF" series and graphic displays of the "MN" series. It operates at a voltage of approximately 3.3 V with a maximum current of 20 mA.

Driver for e-Paper displays in the form of an overlay for Arduino and Nucleo. The SPI interface is used for communication with the controller. Waveshare e-Paper Shield