RGB Matrix FeatherWing Kit - matrix display extension module for Feather nRF52840

FFC tape enabling seamless connection of DSI displays with the Raspberry Pi 5 minicomputer. Black EMI shielding foil on both sides of the tape increases anti-interference efficiency, protecting signals against interference from the environment. Waveshare Pi5-Display-Cable-500mm

Touch panel for displays with a diagonal of 5.6 ", 126.5x101mm, resistive touchpanel, tape for ZIFF 4 1mm connector

The expansion module (shield) is designed for Arduino boards. It enables easy connection of 16x32 and 32x32 matrix displays. Requires self-assembly. Adafruit 2601

Extension module dedicated to matrix displays with HUB75 interface. Designed for minicomputers Raspberry Pi. Adafruit 3211

This is a very special adapter, specifically used for adapting our RTD266X driver boards that have 50-pin TFT connectors to use 40-pin TFTs. Please note the adapter cannot be used the other way around! As an addition, we add in an AR1100 resistive touch controller. Adafruit 3305

Extension module dedicated to matrix displays with HUB75 interface. Designed for Feather RP2040, M0 and M4 series tiles. Adafruit 3036

The driver with the TPIC6C596 system allows you to control 7-segment displays using three signal lines. Serial connection of controllers is possible. SparkFun WIG-13279

An expansion board equipped with a 24-pin FPC connector, designed for the SeeedStudio XIAO series boards. Enables smooth control of the ePaper display. Seeed Studio 105990172

The expansion module (shield) is designed for Teensy 4.0 and Teensy 4.1 boards. It allows you to easily connect displays from the SmartMatrix series. Adafruit 4828

HDMI mini cable (male) to VGA (female). It allows you to connect displays with VGA support on a mini HDMI connector to the VGA output. Waveshare Mini HDMI Male to VGA Female Cable

The magnetic holder is an ideal solution for mounting small USB monitors or phones. It provides a stable grip and is easy to install. Waveshare Magnetic Holder

The driver for e-Paper displays with a built-in ESP32 module that provides communication via WiFi and Bluetooth. The board allows you to display images on e-Paper displays from a computer or smartphone. Waveshare e-Paper ESP32 Driver Board

Driver enabling operation of displays with an RGB-666 connector with resolutions from 480x272 to 800x600 pixels. Equipped with an ESP32-S3 microcontroller with 16 MB Flash memory and 8 MB PSRAM memory. Powered and programmable via USB Type-C connector. Adafruit 5800

I2C converter for 2x16 / 4x20 characters, RoHS alphanumeric displays

7" Capacitive Touch Panel Overlay for LattePanda V1.0 IPS Display

TFT LCD driver with DPI interface dedicated to Raspberry Pi. It allows you to operate resistive touch panels. Adafruit 2453