

Particle Argon is a small evaluation board with nRF52840 (ARM Cortex-M4) and WiFi ESP32-D0WD module. Argon is a powerful set that supports Wi-Fi connections, which can act as a standalone Wi-Fi endpoint or a Wi-Fi gateway in Particle Mesh networks. The module includes a system from Nordic Semiconductors (nRF52840), BLE Cortex M4 with lots of Flash, RAM and peripherals, including native USB support. The set will be used in IoT networks and projects using data stored in the cloud.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
WiFI 802.11 b/g/n module. Equipment includes, among others: LED diode, antenna, 8 pins with 2.54mm pitch (including 3 GPIO lines). Power supply: 3.3V.
WIFI-LPB100-A module Eval Kit enables UART data transmission via WiFi, ultra low power consumption, encrypted communication
No product available!
WiFi module developed by AI-Thinker Co., Ltd with ESP8266 processor. Integrates a 32-bit MCU microcontroller with 80 MHz clock, RTOS support, Wi-Fi and antenna. The module supports the IEEE802.11 b / g / ni standard and has a complete TCP / IP protocol stack. AI-Thinker ESP-12S
Development board ESP8266 with WiFi module; WRL-13231
With an integrated ESP8266 WiFi controller this module is a one-stop shop for almost any Internet-connected project. Firmware can be developed in Arduino and uploaded over a simple, serial interface. WRL-13711
WiFi module, IEEE802.11b / g / n, I-PEX connector, High-Flying, RoHS
Board for applications in the area of the Internet of Things (IoT). The module is based on the ESP-WROOM-32E system with 240 MHz clock, equipped with 4 MB Flash and 520 KB SRAM, as well as WiFi and Bluetooth communication. DFrobot DFR0654-F
WIFI-LPT100 Eval Kit module enables UART data transmission via WiFi, ultra low power consumption, encrypted communication
No product available!
Miniature (25x40mm) WiFi b / g / n module with 2.0mm goldpin connection with TCP and UDP protocols operating in standalone and access point mode. The module is equipped with UART and Ethernet interfaces, it is also possible to control GPIO lines. Powered by 3.3V. HF-A11-1
No product available!
Module from the ESP32 series, combining a powerful microcontroller, Wi-Fi and Bluetooth 4.2 BLE. ESP-WROVER-B has a built-in PCB antenna, a large number of GPIO lines and small dimensions. Adafruit 3979
Development board with dimensions and spacing compatible with Arduino Uno R3. It have built-in Wi-Fi ESP8266 module. The device is compatible with WeDOS D1, it can be programmed from the level of Arduino IDE
The expansion board (shield) with the DA16200 WiFi module. It is equipped with a Qwiic connector and is an excellent solution for IoT projects. SparkFun WRL-18567
Board for applications in the area of the Internet of Things (IoT). The module is based on the ESP-WROOM-32E system with 240 MHz clock, equipped with 4 MB Flash and 520 KB SRAM, as well as WiFi and Bluetooth communication. DFRobot DFR0654
A small WiFi module designed for IoT applications. It can communicate with the motherboard via the I2C or UART interface. DFRobot TEL126
Board with the DA16200 WiFi module. It is equipped with a Qwiic connector and is an excellent solution for IoT projects. SparkFun WRL-19696
Miniature (25x40mm) WiFi b/g/n module for surface mounting with support for TCP and UDP protocols operating in standalone and access point modes. The module is equipped with UART and Ethernet interfaces, it is also possible to control GPIO lines. Powered by 3.3V
No product available!
A small evaluation board with nRF52840 (ARM Cortex-M4) and WiFi ESP32-D0WD module for projects related to Mesh networks. Adafruit 3997