RTL8822CE wireless NIC module Wi-Fi/Bluetooth 5.0 - Waveshare 27476
ID: 1196622
5902186303898
zł34.97
Tax included
zł28.43 tax excl.
The Wireless-RTL8822CE module with the RTL8822CE-CG chip enables high-speed, dual-band WiFi and Bluetooth 5.0 connectivity, supporting wireless communication in embedded systems. Thanks to its compatibility with the M.2 A/E Key interface and NVIDIA Jetson boards, it is used in projects requiring reliable network connection and data transmission in IoT environments, robotics, or video processing.
Description
The communication module based on the RTL8822CE-CG chip enables wireless WiFi connectivity in the 802.11a/b/g/n/ac standard and Bluetooth 5.0 communication. It supports 2.4 GHz and 5 GHz bands, offering bandwidth up to 300 Mbps for 2.4 GHz and 867 Mbps for 5 GHz. Compatible with the NGFF (M.2 A/E Key) interface, it supports MU-MIMO technology and Bluetooth Low Energy. The module is designed to work with Linux and Windows 10/11 systems. It provides compatibility with NVIDIA Jetson series baseboards, including Jetson Nano, Jetson Xavier NX, and Jetson Orin NX/Nano, also with IO baseboard variants. The module uses an IPEX connector for antenna connection.
Features
- Dual-band WiFi 2.4 GHz/5 GHz (up to 300 Mbps / 867 Mbps)
- Bluetooth 5.0 with BLE support
- NGFF interface (M.2 A/E Key)
- Support for 802.11a/b/g/n/ac, MU-MIMO, 802.11ac Wave-2
- Compatibility with Linux and Windows 10/11
- Compatible with Jetson Nano, Xavier NX, Orin NX/Nano and their baseboards
- IPEX antenna connector
Included
- Wireless-RTL8822CE module x1
- IPEX to SMA cable ~20 cm x2
- Antenna x2
1196622
Data sheet
- Logic voltage
- 3,3 V
- Wi-Fi chip
- RTL8822CE-CG
- Wi-Fi standard
- 802.11 a/b/g/n/ac
- Frequency range
- 2,4 GHz/5 GHz
- Baud rate
- 867 Mbps
- Antenna connector
- I-PEX
- Power supply voltage
- 3,3 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
The IoT module combining Wi-Fi and Bluetooth (BLE) technologies, which is designed for a wide range of applications, from low-power sensor networks to the most demanding tasks such as voice coding, music streaming and MP3 decoding. Espressif ESP32-WROOM-32D 128MBit
zł32.90
1 weeks
No product available!
A small evaluation board with nRF52840 (ARM Cortex-M4) and WiFi ESP32-D0WD module for projects related to Mesh networks. Adafruit 3997
zł256.95
24h
Available quantity: 2
Available
Module from the ESP32 series, combining a powerful microcontroller, Wi-Fi and Bluetooth 4.2 BLE. ESP-WROVER-B has a built-in PCB antenna, a large number of GPIO lines and small dimensions. Adafruit 3979
zł55.12
4 weeks
No product available!
Development board D1 Mini with WiFi module ESP-8266MOD and 4 MB Flash memory. The module can be programmed from the Arduino IDE level. WeMos D1 Mini
zł18.24
24h
Available quantity: 54
Available
Development board D1 Mini V3 with WiFi module ESP-8266 and 4 MB Flash memory. The module can be programmed from the Arduino IDE level. WeMos D1 Mini V3.x
zł18.70
24h
Available quantity: 25
Available
WiFi module developed by AI-Thinker Co., Ltd with ESP8266 processor. Integrates a 32-bit MCU microcontroller with 80 MHz clock, RTOS support, Wi-Fi and antenna. The module supports the IEEE802.11 b / g / ni standard and has a complete TCP / IP protocol stack. AI-Thinker ESP-12S
zł9.29
24h
Available quantity: 35
Available
Transceiver module equipped with SoC ESP8285 IoT enabling communication with WiFi networks. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 113020011
zł71.75
24h
Available quantity: 1
Available
Development kit designed to support rapid prototyping and knowledge of Azure Sphere technology. Seeed Studio 102991099
zł490.84
24h
Available quantity: 3
Available
Board for applications in the area of the Internet of Things (IoT). The module is based on the ESP-WROOM-32E system with 240 MHz clock, equipped with 4 MB Flash and 520 KB SRAM, as well as WiFi and Bluetooth communication. DFRobot DFR0654
zł48.89
24h
Available quantity: 9
Available
Board for applications in the area of the Internet of Things (IoT). The module is based on the ESP-WROOM-32E system with 240 MHz clock, equipped with 4 MB Flash and 520 KB SRAM, as well as WiFi and Bluetooth communication. DFrobot DFR0654-F
zł53.96
24h
Available quantity: 3
Available
A small WiFi module designed for IoT applications. It can communicate with the motherboard via the I2C or UART interface. DFRobot TEL126
zł78.93
24h
Available quantity: 1
Available
The Wio RP2040 module is an advanced Wi-Fi chip designed for IoT projects. Equipped with a powerful Raspberry Pi RP2040 processor and an ESP8285 Wi-Fi chip, it provides stable wireless connectivity. It is compatible with popular programming environments such as C/C++ and MicroPython. SeeedStudio 102991556
zł43.98
24h
Available quantity: 3
Available
Powerful, generic Wi-Fi+BT+BLE MCU modules that target a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding. Espressif ESP32-WROOM-32E 32MBit (4MB)
zł19.08
24h
Available quantity: 8
Available
The expansion board (shield) with the DA16200 WiFi module. It is equipped with a Qwiic connector and is an excellent solution for IoT projects. SparkFun WRL-18567
zł105.42
24h
Available quantity: 2
Available
Function module designed for MicroMod boards. It allows you to add WiFi wireless communication based on the DA16200 chip to the project. SparkFun WRL-18594
zł161.66
24h
Available quantity: 1
Available
UART to Wi-Fi 802.11 b/g/n converter module with external antenna, which can connect traditional serial device and MCU controlled device to Wi-Fi network for control and management. USR-WIFI232-B2
zł49.09
24h
Available quantity: 9
Available
The Wireless-RTL8822CE module with the RTL8822CE-CG chip enables high-speed, dual-band WiFi and Bluetooth 5.0 connectivity, supporting wireless communication in embedded systems. Thanks to its compatibility with the M.2 A/E Key interface and NVIDIA Jetson boards, it is used in projects requiring reliable network connection and data transmission in IoT environments, robotics, or video processing.