

Starter Cable Kit for Spacely Carrier.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Base plate for NVIDIA Jetson TX2 / TX2i and Jetson TX1 modules. Equipped with 2 Gigabit Ethernet, HDMI, USB 3.0, USB 2.0, USB CLIENT ports, as well as miniPCIe extension, mSATA and optional GPS / GNSS module. Connect Tech ASG006 / ASG009
No product available!
Starter Cable Kit for Astro Breakout Board. Connect Tech CKG041
No product available!
Kit for building an intelligent JetBot robot based on Jetson Nano. It consists of an expansion module, camera with Sony IMX219 image sensor, motors, housing and a set of mounting screws. Waveshare JetBot 2GB AI Kit Acce
Cooling fan dedicated to the NVIDIA Jetson Orin NX and Orin Nano minicomputers. Waveshare Orin-FAN-PWM
Module with IMX298 sensor working with NVIDIA Jetson Nano. The sensor used has a 16 MP matrix and allows you to record video at resolutions of 16MP/30fps. Acrylic case included. ArduCAM B0214
Camera with a resolution of 8 MPx with a USB interface. Equipped with a CMOS IMX219 sensor with a lens with a viewing angle of 62° and a 30 cm extension cord. ArduCAM B0320
No product available!
A set with two OV9281 cameras with a resolution of 1MP and an expansion module for Raspberry Pi, Jetson Nano and Xavier NX, which allows you to simultaneously connect two cameras to the minicomputer. ArduCAM B0266
No product available!
Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 4GB or NVIDIA Jetson TX2i modules. It is equipped with an Ethernet connector, microSD, UART, I2C and GPIO interfaces, USB 2.0 OTG, USB 3.0 ports, 4-line MIPI (I-PEX), CAN, HDMI 2.0 connector and a 7-pin SATA connector. Connect Tech ASG016
No product available!
Camera module designed for NVIDIA Jetson Nano/Xavier NX. The camera is equipped with a Sony IMX477 sensor and focus controlled by the I2C interface. ArduCAM B0273
An 8MP camera designed to work with NVIDIA Jetson boards, as well as other systems such as ARM, DSP, and FPGA, offering a wide field of view and high image quality. The camera is very sensitive to infrared light due to the lack of an IR filter, which allows it to be used in applications such as night vision systems, heat detection, and robotic vision systems. ArduCAM B0193
Kit for the construction of the intelligent JetBot robot based on Jetson Nano. It consists of a board (module with OLED display, battery basket and motor controller), expansion module with connectors, cameras with Sony IMX219 image sensor, motors, housing and a set of mounting screws. It is also equipped with a 2.4/5 GHz WiFi module and Bluetooth 4.2. Waveshare JetBot AI Kit Accesories
Cooling fan dedicated to the minicomputer NVIDIA Jetson TX2 NX. Waveshare TX2-FAN-PWM
5.5" AMOLED display with touch screen. Equipped with HDMI interface for image display and USB for touch screen. Resolution 1920x1080 pixels. Waveshare 5.5inch HDMI AMOLED
An expansion module for NVIDIA Jetson Nano development kits. It is equipped with a number of environmental sensors. Waveshare Environment Sensor for Jetson Nano
Camera module with IMX477 sensor with a resolution of 12.3 MP for NVIDIA Jetson Nano/Xavier and Raspberry Pi Compute Module. ArduCAM B0279
A set with four OV9281 cameras with a resolution of 1MP and an expansion module for Raspberry Pi, Jetson Nano and Xavier NX, which allows you to simultaneously connect four cameras to the minicomputer. ArduCAM B0267
No product available!
Set with camera and wide angle lens. The set is designed to work with the NVIDIA Jetson Nano computer. ArduCAM B0249
Dedicated cooling fan for NVIDIA Jetson Nano mini computers. Powered by 5V, controlled by PWM signal. Waveshare Fan-4020-PWM-5V
Starter Cable Kit for Spacely Carrier. Connect Tech CKG045