![Audio VU meter - stereo audio level indicator](https://kamami.pl/71775-large_default/audio-vu-meter-stereo-audio-level-indicator.jpg)
![Audio VU meter - stereo audio level indicator](https://kamami.pl/71775-large_default/audio-vu-meter-stereo-audio-level-indicator.jpg)
zł265.76 tax excl.
Digital audio level indicator consisting of 56 LEDs per channel. Powered by a micro USB connector, it can work with audio players, telephones or computers or display the audio level on the basis of reading from the built-in microphone
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Digital stereo audio level indicator in the form of a small device enclosed in a housing. The display consists of 56 LEDs per channel, including 32 green, 16 orange and 8 red. It can work in one of 5 modes and display the audio level on the basis of the signal supplied from an external player via the RCA input or the built-in microphone. The indicator is powered via the micro USB connector with a voltage of 5 V and a current of 100 mA. The input voltage should not exceed 3 Vrms, and thanks to the potentiometer it is possible to adjust the signal gain. All connectors and the power switch are located on the back of the housing. The device can be used, for example, as part of a home audio system.
Audio cable with 3.5 mm 3-pin minijack plugs and 3 x RCA (chinch) 0.24 m long
No product available!
Bluetooth audio receiver module that allows wireless transmission of sounds. It is equipped with a PCB antenna and a 3.5 mm Jack audio connector
WM8960 stereo codec module with driver for 1W class D speakers and headphones. It uses the I2S interface and the I2C bus to configure the system. SparkFun BOB-21250
Audio module with DAC, headphone amplifier and display, designed to work with the Raspberry Pi. It is based on the PCM5100A system and communicates via the I2S interface. Pimoroni PIM482
Stereo audio amplifier based on the TPA3116D2 chip. It can be powered from 12 to 26 V and has two 120 W outputs. XH-M543
Audio module with DAC, line output and display, designed to work with the Raspberry Pi. Pimoroni PIM483
Module with VS1000D chip and SPI Flash memory, which allows you to play sounds in Ogg Vorbix and WAV format stored on a SPI Flash memory. SparkFun DEV-14006
Stereo audio isolator based on two transformers. It allows to eliminate noise in the audio path resulting from different ground resistances of the sound source and the receiver. XH-M372
No product available!
An offline speech recognition module that enables recognition and interpretation of user spoken commands without access to an external pattern database. It is equipped with 121 commonly used fixed command words and the ability to learn up to 17 new customised instructions. DFRobot SEN0539-EN
Bluetooth audio receiver module in the set with a 3.5 mm Jack adapter. It enables wireless transmission of sounds. It is equipped with a 3.5 mm audio jack, microUSB socket and control buttons
No product available!
A set with an audio amplifier with a power of 350 W dedicated to the bass column (subwoofer)
The module with a digital stereo audio amplifier is equipped with Bluetooth communication. The system allows you to connect two speakers with an impedance from 4 Ω to 8 Ω and a power of 15 W per channel
A sound card in the form of a small device with a USB plug, designed to work with the Raspberry Pi and NVIDIA Jetson Nano minicomputer. Waveshare USB TO AUDIO
A module with a MEMS microphone and an amplifier that will allow you to detect a voice, a clap or a door slam. The board has an analog output. SparkFun BOB-18011
Multifunctional speech recognition module. Allows you to add speech recognition to your own application. The module can be used with any evaluation kit that has a UART interface. Sparkfun COM-15453
No product available!
Digital audio level indicator consisting of 56 LEDs per channel. Powered by a micro USB connector, it can work with audio players, telephones or computers or display the audio level on the basis of reading from the built-in microphone