RP2350 MCU board with 1.28″ round touch LCD 240×240 and enclosure - Waveshare 29075
ID: 1197478
5902186321687
zł108.22
Tax included
zł87.98 tax excl.
RP2350-Touch-LCD-1.28-B is a compact development module with a color touch screen, ideal for projects requiring an HMI interface and mobile integration with sensors. Thanks to the CNC enclosure, the product gains durability and better heat dissipation, making it suitable for prototyping and embedded applications where reliability and elegant design are important. Support for multiple programming languages and extensive technical documentation facilitate rapid development of applications based on ARM and RISC-V architecture.
Description
The RP2350-Touch-LCD-1.28-B module integrates the RP2350 microcontroller with a 1.28-inch capacitive IPS touch screen with a resolution of 240×240 pixels, all enclosed in a CNC aluminum housing with a matte acrylic bottom cover. The device, based on dual-core and dual-ISA architecture (ARM Cortex-M33 + RISC-V Hazard3), operates at a frequency of up to 150 MHz. The module includes 520 KB of SRAM and 16 MB of NOR Flash memory.
The board features a USB 1.1 interface (host/device), Li-Ion battery charging management (ETA6098), a temperature sensor, and a 6-axis IMU (QMI8658) with accelerometer and gyroscope. Programming is done via USB Type-C using the drag-and-drop method, with support for C/C++, Arduino, and MicroPython environments. A SH1.0 (12PIN) cable is included, and 6 GPIO lines are available through a dedicated connector.
Features
- Microcontroller: RP2350 – 2× ARM Cortex-M33 + 2× RISC-V Hazard3, up to 150 MHz
- Memory: 520 KB SRAM, 16 MB NOR Flash
- Display: IPS, 1.28", 240×240, 65K colors, capacitive touch
- Sensors: QMI8658 (6DOF IMU), temperature sensor
- Li-Ion charger: ETA6098, MX1.25 battery connector
- USB 1.1 Type-C interface, host/device support
- 6 GPIO via SH1.0 connector
- Sleep and low-power modes
- Enclosure: CNC aluminum housing, acrylic bottom cover
Included in the set
- RP2350-Touch-LCD-1.28-B x1
- SH1.0 12PIN cable x1
1197478
Data sheet
- Microcontroller
- RP2350
- Flash memory
- 16 MB
- Number of I/O
- 6
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- No
- MicroSD slot
- No
- Length
- 48mm
- Width
- 48 mm
- USB connector type
- USB type C
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Mini board with RP2040 microcontroller equipped with two ARM Cortex-M0 + 133 MHz cores, 264 kB RAM. The board also has 8 MB of QSPI flash memory. The circuit can be programmed in C/C++, CircuitPython or MicroPython. Pimoroni SP011
zł85.02
4 weeks
No product available!
Raspberry Pi Pico 2WH, based on the RP2350 microcontroller and has a built-in WiFi and Bluetooth communication module. Pi Pico 2WH offers significantly increased performance and functionality thanks to the use of Cortex M33 and RISC-V cores, doubled SRAM memory and advanced security features, including Arm TrustZone. It is hardware and software compatible with previous models, making it an attractive choice for enthusiasts and professionals in the field of embedded systems. Version with soldered joints.
zł41.98
24h
Available quantity: 24
Available
Pimoroni Tiny 2350 PIM766 is a compact board with an RP2350A microcontroller, 4 MB of flash memory and a USB-C connector, dedicated to projects requiring small dimensions. Thanks to the castellated pads it works well for PCB integration, and compatibility with MicroPython and the Qw/ST connector facilitates quick prototyping.
zł57.07
24h
Available quantity: 2
Available
Base board with soldered Raspberry Pi Pico module. Equipped with numerous connectors, buzzer, buttons and LEDs. Cytron MAKER-PI-PICO-MINI
zł68.11
24h
Available quantity: 10
Available
MicroMod main module with RP2040 microcontroller. Equipped with an M.2 connector, it can work with MicroMod expansion boards. SprakFun DEV-17720
zł77.32
24h
Available quantity: 2
Available
The RP2040 microcontroller board features two ARM Cortex-M0+ cores running at 133 MHz, 264 kB of RAM. The board also features 2 MB of QSPI flash memory and an FPC connector. It comes with a USB adapter. Waveshare RP2040-Tiny-Kit
zł26.27
24h
Available quantity: 5
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-Zero
zł14.97
24h
Available quantity: 15
Available
Evaluation board with a Raspberry Pi RP2040 microcontroller and a TCP/IP W5500 controller. WIZnet W5500-EVB-PICO
zł55.74
24h
Available quantity: 38
Available
Arduino development board with RP2040 microcontroller. Equipped with WiFi and Bluetooth module, 6-axis IMU system with accelerometer and gyroscope, MEMS microphone, RGB LED diode and cryptographic system. Arduino ABX00052
zł139.00
24h
Available quantity: 22
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at a frequency of 133 MHz, 264 kB RAM. There is as much as 16 MB of QSPI flash memory on the board. The system can be programmed in C / C ++ or microPython. Soldered connectors. KApico RP2040
zł19.90
24h
Available quantity: 65
Available
RP2350-Zero enables rapid development of embedded applications while maintaining minimal mounting requirements and excellent flexibility in baseboard design. Particularly recommended for portable devices, educational use, and as a control module in larger systems.
zł22.35
24h
Available quantity: 7
Available
A module for building a mechanical keyboard with 16 buttons and backlight. Based on the RP2040 chip, it has sockets compatible with Cherry-MX switches. Pimoroni PIM567
zł232.36
4 weeks
No product available!
Versatile digital video module. It uses two RP2040 chips (one in the form of a Raspberry Pi Pico W board and the other as a separate RP2040 microcontroller) and is equipped with an HDMI output connector. Pimoroni PIM686
zł362.44
24h
Available quantity: 2
Available
RP2350-Touch-AMOLED-1.8 with battery is an advanced development board with an AMOLED display, touch support, motion sensors, audio, and a wide range of interfaces. Designed for mobile and embedded applications, it enables the creation of compact interactive devices with full open-source support.
zł129.36
24h
Available quantity: 4
Available
RP2350-Touch-LCD-2 is a compact and cost-effective development board featuring an IPS touchscreen display, motion sensor, and camera interface. Designed for developing interactive, educational, and portable applications, it is based on the RP2350 microcontroller with a unique ARM + RISC-V architecture.
zł73.39
24h
Available quantity: 2
Available
The board features the Raspberry Pi Foundation\'s RP2040 microcontroller and the WizFi360 module, which provides 2.4GHz WiFi communication over 802.11 b/g/n. WIZnet WizFi360-EVB-Pico
zł35.90
24h
Available quantity: 17
Available
RP2350-Touch-LCD-1.28-B is a compact development module with a color touch screen, ideal for projects requiring an HMI interface and mobile integration with sensors. Thanks to the CNC enclosure, the product gains durability and better heat dissipation, making it suitable for prototyping and embedded applications where reliability and elegant design are important. Support for multiple programming languages and extensive technical documentation facilitate rapid development of applications based on ARM and RISC-V architecture.