Best sellers

INA169 current sensor module. The system can be supplied with the voltage from 2.7 V to 60 V and has an analog output. SparkFun SEN-12040

DEV-14352

Module with a 1.51" OLED transparent display. Communicates via the SPI or GDI interface. DFRobot DFR0934

The 688ZZ bearing is a small, precision deep groove ball bearing with dimensions of 8×16×5 mm (inner diameter × outer diameter × thickness). It features double metal shields that protect against dust and small contaminants, although they are not fully waterproof. Ideal for use in model making, 3D printers, small electric motors, or guide rollers

The S9V11F5S6CMA switching step-up/step-down regulator efficiently produces a fixed 5 V (default) or 6 V (selectable) output whether it is higher or lower than the input voltage, which can range from 2 V to 16 V. (Note: minimum start-up voltage is 3 V, but it operates to 2 V after that.)

The S9V11F3S5C3 switching step-up/step-down regulator efficiently produces a fixed 3.3 V (default) or 5 V (selectable) output whether it is higher or lower than the input voltage, which can range from 3 V to 16 V. The regulator also has fixed 3.3 V low-voltage cutoff with hysteresis that can be used to prevent battery over-discharge.

ToF distance sensor (Time of flight) with a range of up to 5 m. The module is supplied with the voltage of 3.3 V and communicates via the I2C interface. SparkFun SEN-19218

ToF distance sensor (Time of flight) with a range of up to 5 m. The module is supplied with the voltage of 3.3 V and communicates via the I2C interface. SparkFun SEN-19037

Connect your Arduino-compatible to the Internet with this WiFi shield that features the FCC-certified ATWINC1500 module from Atmel. Adafruit 3653

The socket tester allows you to check the wiring errors of the sockets. It helps to detect errors such as missing one of the wires, incorrect connection and performing a Residual Current Device (RCD) test. Uni-T UT07B-EU

The 608ZZ bearing is a small, precision deep groove ball bearing with dimensions of 8×22×7 mm (inner diameter × outer diameter × thickness). It features double metal shields that protect against dust and small contaminants, although they are not fully waterproof. Ideal for use in model making, 3D printers, small electric motors, or guide rollers

Connect your Arduino-compatible to the Internet with this WiFi shield that features the FCC-certified ATWINC1500 module from Atmel. Adafruit 3654

MicroMod main module with Alorium Sno M2 chip. Equipped with an M.2 connector, it can work with MicroMod expansion boards. SparkFun DEV-18030

Extension board with distance sensor ToF VL53L1, The sensor has a range of up to 400 cm. The kit includes 2 modules with sensors that can be connected via a 10-pin connector. The shield is compatible with STM32 Nucleo boards and has an Arduino UNO R3 connector. STMicroelectronics X-NUCLEO-53L1A2

Single board computer with ARM Cortex-A8 AM335x processor, clocked at 1 GHz with 512 MB of RAM. The module has, among others USB interfaces, I / O pins, WiFi and Bluetooth. SeeedStudio 102010048

A small LCD panel with the ability to control its transparency. The panel can block up to about 95% of light. Adafruit 3627

7.9" LCD IPS display with touch screen. The display is equipped with HDMI interface for image display and USB for touch screen. High resolution 400x1280 pixels. Waveshare 7.9inch HDMI LCD

The S9V11MACMA switching step-up/step-down regulator efficiently produces a finely adjustable output between 2.5 V and 9 V whether it is higher or lower than the input voltage, which can range from 3 V to 16 V. The regulator also has a precision-adjustable low-voltage cutoff with hysteresis that can be used to prevent battery over-discharge.

5" LCD TFT display with touch screen. The display is equipped with HDMI and VGA interface for image display and USB for touch screen. Resolution 800x480 pixels. Waveshare 5inch HDMI LCD (G)