Best sellers

UART-Ethernet converter for bi-directional communication between devices equipped with UART TTL ports and Ethernet. It is visible in the system as a virtual COM port and configured via a web page or via AT commands. USR-K5

A stepper motor controller that can operate with a voltage range of 24 to 110 VDC or 18 to 80 VAC and a maximum current of up to 8.4 A. It allows micro step configuration in the range of 2 to 256. 2DM860H

HDMI-USB adapter dedicated to video capture and transfer to devices with USB type A connector. Waveshare HDMI to USB Adapter

Green LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 120 LEDs/m. Protection class IP65 (waterproof)

Bluetooth audio receiver module enclosed in a housing that enables wireless transmission of sounds. It is equipped with a PCB antenna, microphone, 3.5 mm audio jack and control buttons

Din rail enclosure Z106 lightgray ABS V0

Unshielded UTP category 5E Ethernet network cable with RJ45 plugs. Lanberg PCU5-10CC-0500-W

Slotted screwdriver with VDE insulation, made of durable S2 steel with a hardness of HRC 56-60. Yato YT-2818

HP thermally conductive silicone paste that improves heat transfer between electronic components and the heat sink, guaranteeing their proper operation. They effectively prevent punctures and protect against weather influences. AG Termopasty ART.AGT-125

Module with an optical flow sensor PMW3901. It uses a low resolution camera to detect surface movement. It communicates via the SPI interface. Pimoroni PIM453

Step-Up/Step-Down converter module based on the S13V10F5 system. It has an input voltage from 2.8 to 22 V and an output voltage of 5 V. The current efficiency of the converter is up to 1 A. Pololu 4083

Unshielded UTP category 6 Ethernet network cable with RJ45 plugs. Lanberg PCU6-10CC-1000-O

Protective cover for Micsig brand oscilloscopes. Fits models from the SATO/ATO series. Micsig MS-SC-2

Digital oscilloscope. It has two measurement channels with 150 MHz bandwidth. Hantek DSO2C15

Camera with a resolution of 8 MPx with a USB interface. Equipped with a CMOS IMX219 sensor with a lens with a 60° angle of view, autofocus and a 30 cm extension cable. ArduCAM B0321

Power cord with a built-in Power Delivery (PD) trigger with a working voltage of 9 V. Has a USB type C connector and a DC plug 5.5x2.5 mm. Length 3 m

Module with encoder and RGB backlight. It has an unlimited range of motion and is perfect for e.g. lighting control. Pimoroni PIM522

Set with IMX477 12MP camera, USB cable, lens and tripod. Compatible with UVC, works with Raspberry Pi, Android devices and PC. ArduCAM B0280

Cable (adapter) STEMMA QT/Qwiic for Arduino MKR (ESLOV) 100 mm long. It enables interoperability between systems based on I2C SparkFun Qwiic and Adafruit STEMMA QT and Arduino MKR boards. Adafruit 4483

Expansion board with LCD TFT 2.2" display for STM32 Nucleo-144 sets. Equipped with SPI NOR Flash 64Mbit memory for storing images and a joystick for GUI navigation. STMicroelectronics X-NUCLEO-GFX02Z1