Best sellers

LED strip with addressable RGB WS2813 diodes on a black PCB. It is powered by 5 V DC, has a length of 5 m and 30 LEDs/m. Protection level IP30

Module with a fan and RGB diode designed to work with the Raspberry Pi. The fan rotation speed can be controlled from the program level. Pimoroni PIM301

Flexible LED (LED filament) in blue, length 130 mm

IPS 3.5" LCD display with touch screen. The display is equipped with a DPI interface for image display and I2C interface for a touch panel. Resolution 640x480 pixels. Waveshare 3.5inch DPI LCD

Flexible LED (LED filament) in green, length 300 mm

Flexible LED (LED filament) in red, length 130 mm

The platform is based on the Atmega 32U4 microcontroller with a default Arduino compatible bootloader, 26 O / I ports and a microUSB port. Polol 3145

A set of 10 colored wires with 50 cm long crocodile clips.

Step-up DC-DC converter module, 0.9-5V input voltage, 5V output voltage (max. 600 mA) connected to the USB socket. There is a diode on the board indicating the power connection. modPS

Li-Po battery with a rated voltage of 3.7 V and a capacity of 620 mAh, equipped with a PCM protection and a 2.5 JST-RCY connector. Akyga LP852040

A module with a set of environmental sensors (pressure, temperature and humidity sensor, light sensor, MEMS microphone) designed for micro:bit. Pimoroni PIM355

Radio module with RFM69HCW 433 MHz chip, designed to work with the Raspberry Pi. Equipped with an OLED display and buttons. Adafruit 4073

TPL5110 external counter module to turn on a project after a set time and save energy. The TPL5110\'s delay is configurable with resistors ranging from 100 ms to two hours. SparkFun PRT-15353

Wireless switch operating at 433 MHz frequency. It does not require a power supply. DFRobot TEL0146

Single-sided universal tile with dimensions of 18x30 cm made of FR-4 laminate with a thickness of 0.4 mm. Perfect for creating electronic circuits and prototypes using THT components. DFRobot FIT0576

PCIe connector adapter to 4 USB 3.2 Gen1 slots designed to work with Raspberry Pi CM4 modules. It allows you to connect devices with a USB connector to the base board via a PCIe connector. Waveshare PCIe TO USB 3.2 Gen1 (B)

4.3" IPS LCD display with touch panel. It is equipped with a DSI interface for displaying the image and I2C for operating the touch panel. It offers a resolution of 800x480 pixels. Waveshare 4.3inch DSI LCD

Digital humidity and temperature sensor, RoHS

Non-contact temperature sensor with a measuring range from -70 to 380°C. It uses infrared waves and has a current output. DFRobot SEN0264

Bi-directional ESC speed controller for brush motors. It can deliver 20 A and has cables terminated with an XT60 connector. DFRobot DRI0047