Wireless switch operating at 433 MHz frequency. It does not require the use of batteries, and for power supply it uses the mechanism of converting kinetic energy into electricity when the button is pressed. There is a DIP-Switch with 4 sections on the board, thanks to which the user can send one of 15 types of signals (at least one section must be turned on in order not to damage the module). The external antenna allows for a range of up to 40 m in open space. The module can also be powered by pins on the board, but then you should not generate additional energy using the button. The module can work with 433 MHz receivers with the EV1527 encoding format, incl. with Gravity Receiver: Digital Wireless Receive Switch. It can be used as an element of a wireless doorbell or wall switch. Full documentation with examples of use is available on the product page.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
A set with a radio transmitter and receiver operating at 433 MHz. The modules are equipped with Gravity connectors and communicate via a digital interface. DFRobot TEL0140-1
Radio transmitter module operating at 433 MHz. It is equipped with Gravity connectors and communicates via a digital interface. DFRobot TEL0140
Radio receiver module operating at 433 MHz. It is equipped with Gravity connectors and communicates via a digital interface. DFRobot TEL0142
The module enables remote control of four independent devices using the 433 MHz band. Simple configuration of operating modes and the ability to tune the receiver make the set suitable for automation, lighting systems, and remote control of devices.
A set with a radio transmitter and receiver operating at 433 MHz. The modules are equipped with Grove connectors and communicate via a digital interface. Seeed Studio 104020002
HAT module with RFM95W 868 MHz system for LoRa/LoRaWAN communication and OLED display, designed for Raspberry Pi minicomputers. Adafruit 4074
No product available!
Wireless data transmission module operating at 433 MHz. It is powered with the voltage of 12 V
2.4 GHz RF module with nRF24L01+ chip. The module has an RP-SMA connector with reverse polarity, allowing the connection of an external antenna. The system has a built-in 3.3 V stabilizer and IO lines with a tolerance of 5 V. SparkFun WRL-00705
No product available!
modNRF905 is a versatile RF transceiver module operating in three ISM bands, ideal for remote communication between devices in IoT systems, automation, and remote control. With low power consumption, fast channel switching, and an included antenna, it provides stable and energy-efficient wireless connections.
No product available!
A module with a 433 MHz radio transmitter for the M5Stack sets. Based on the SYN115 chip, it has a built-in PCB antenna. M5Stack U114
No product available!
A wireless transceiver operating in the 434 MHz band based on the RFM69HCW system. Maximum power: 100mW; bit rate up to 300kbps. Range in the open space reaches up to 500m. The module communicates using the SPI bus. Compatible with Arduino
Expansion board for STM32 Nucleo based on S2-LP RF transmitter operating in 868MHz band. The expansion board is compatible with ST morpho and Arduino UNO R3 connectors. STMicroelectronics X-NUCLEO-S2868A2
A long-range RF sub-GHz wireless transceiver module capable of operating in the 433 MHz frequency band. The integrated architecture allows the use of a minimum number of external components with maximum design flexibility. RFM69HW433
NRF24L01 module with UART serial interface. It has a built-in antenna and a microcontroller that acts as a converter. It allows the design and testing of 2.4 GHz radio communication via a serial interface
SYN115/SYN480R set enables the implementation of 433 MHz wireless communication in DIY projects and microcontroller systems. It is suitable for applications in remote control systems, home automation, and data transmission between devices.
No product available!
Adapter with 3.3V voltage regulator designed for NRF24L01 modules with 8-pin connector
No product available!
Radio transmitter module operating at 433 MHz. It is equipped with Gravity connectors and communicates via a digital interface. DFRobot TEL0140
The NRF24L01+ chip module for radio communication, which operates in the 2.4 GHz ISM band. It is used in various applications such as wireless sensors, remote control, wireless networks. It supports the Enhanced ShockBurst protocol, which provides automatic packet handling. It communicates via an SPI interface
Wireless switch operating at 433 MHz frequency. It does not require a power supply. DFRobot TEL0146