New products
New products New products
Best sellers
There are 16660 products.
The board is equipped with ATSAMD51 microcontroller with ARM Cortex-M4 core and SPI Flash memory, GPIO pins and RGB diode. Adafruit 3857
PCB Cleaner Antistatic is a professional preparation based on isopropyl alcohol, intended for cleaning precision mechanics, printed circuit boards, electronic equipment and optics, which facilitates the removal of fluxes and rosin, is chemically neutral to commonly used materials and is supplied in a convenient 500 ml plastic bottle
ABS filament in blue with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy ABS Blue
Light Green TR PCTG filament with a diameter of 1.75 mm. 0.75 kg of filament is wound on the spool. Fiberlogy PCTG Light Green TR
7-port HUB with USB 2.0 interface designed for use in industry. Enclosed in a metal housing. Waveshare USB-HUB-7U-NP
Class D digital audio amplifier with Bluetooth 5.0 module. It has two channels with a power of 50 W and can work with speakers from 4 to 8 Ω. It is powered with the voltage ranging from 9 to 24 V
A two-channel DC motor controller with a I2C interface. It is powered from 1.8 V to 22 V and can deliver up to 1.6 A per motor. Board with connectors for assembly. Pololu 5079
A single-channel DC motor controller with an I2C interface. It is powered from 1.8 V to 22 V and can deliver up to 1.8 A of current. Board with connectors for assembly. Pololu 5075
Extension module with a Raspberry Pi Pico W board with WiFi communication. The set is equipped with relays, buffer inputs, sink type outputs and analog inputs. Pimoroni PIM632
Module with BME280 sensor, microphone and PMSA003I air quality sensor equipped with Raspberry Pi Pico W. Pimoroni PIM629
Inverter powered by 100 - 240 V AC, generates alternating current to power electroluminescent wires glowing under the influence of high voltage
An Ethernet-Wi-Fi development board that allows you to connect Ethernet devices via Wi-Fi. It consists of two development boards: Ethernet (A) and PoE (B). The Ethernet (A) includes the ESP32-WROVER-E Bluetooth/Wi-Fi module and IP101GRI, and the PoE module (B) provides the power over Ethernet function.
Shield designed for IoT applications with LTE CAT M1/NB-IoT SARA-R4 modem. The board is compatible with Arduino, allows you to add communication via cellular networks to Arduino boards. SparkFun CEL-14997
El-wire is a thin and flexible wire which shines under high voltage. The cable is red, has a diameter of 3mm and a length of 50 meters
STSPIN220 stepper motor driver module with a low voltage range of 1.8...10V and 1.1A working current. The controller allows you to control the motor motion up to 9 different resolutions (up to 1/256 steps). Pololu 2877
Charger module with a basket for a CR123A battery dedicated to micro:Maqueen robots. DFRobot FIT0611
TFT color LCD display module with touch panel. It offers a diagonal of 2.8" and a resolution of 240x320 pixels. It has a built-in ILI9341 driver, communicates via an SPI interface and is equipped with a microSD card slot and an EYESPI connector. Adafruit 2090
High-voltage differential probe. It has good measurement characteristics: a bandwidth of 100 MHz and an operating voltage of up to 1300 V. The probe has two attenuation coefficients: 50X and 500X. Hantek HT8100
Two-channel motor controller with L298N system with 4.8 ... 46V motor power supply and 2A current capacity per channel. It has a protection in the form of diodes. DFRobot DRI0002