Best sellers

USB flash drive for security testing using the key injection method. It is highly effective in system penetration, can simulate keyboard operation and enables hotplug attacks. Hook5 USB RUBBER DUCKY

An advanced keylogger equipped with penetration testing tools, remote access and a function that triggers attacks after entering specific keywords. It has a built-in USB Type-A port and emulates devices such as serial port, storage, HID and Ethernet. Hak5 KEY CROC

Device for penetration testing of WiFi networks in the 2.4 GHz 802.11 b/g/n bands. Enables attacks on WPA and WPA Enterprise networks. It can be powered via a USB Type-C cable and is compatible with multiple operating systems, including Windows, Mac, Linux, Android, iOS. Hak5 WiFi Pineapple Mark VII Basic

Matte PET-G filament, black, diameter 1.75 mm. There is 0.85 kg of filament wound on the spool. Fiberlogy Matte PET-G Black

Matte PET-G filament, gray, diameter 1.75 mm. There is 0.85 kg of filament wound on the spool. Fiberlogy Matte PET-G Gray

Step-Down converter with input voltage up to 36 V which effectively reduces it to 3.3 V, while maintaining current up to 500 mA. Pololu 2842

The compact (0.4″ × 0.5″) D24V5F5 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 5 V while allowing for a maximum output current of 500 mA. Pololu 2843

The compact (0.4″ × 0.5″) D24V5F6 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 6 V while allowing for a maximum output current of 500 mA. Pololu 2844

The compact (0.4″ × 0.5″) D24V5F9 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 9 V while allowing for a maximum output current of 500 mA. Pololu 2845

PoE power module designed for Raspberry Pi 5. It allows you to use the PoE interface to power the Raspberry Pi via an Ethernet cable, eliminating the need to use a separate power supply. Waveshare PoE HAT (F)

Class D digital audio amplifier. It has two channels with a power of 50 W and can work with speakers from 4 to 8 Ω. It is powered with the voltage from 11 to 26 V

TMAG5273 Hall sensor module dedicated to detecting the presence, strength and direction of a magnetic field in three dimensions. It uses communication via the I2C interface and Qwiic connectors. SparkFun SEN-23881

Stereo audio amplifier based on the TDA7492 chip. It can be powered with the voltage from 10 to 26 V and has two outputs with a power of 50 W

GNSS receiver based on the UM980 module. It allows you to track signals from several satellite systems, including GPS, GLONASS, Galileo, Beidou, QZSS and SBAS, and offers an accuracy of up to 8 mm using an RTK base station. SparkFun GPS-23286

Kit with MPX5700AP pressure sensor, syringe and tube. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 110020248

Advanced signal generator. It has two independent signal channels. It offers a sampling rate of 300 MSa/s and allows the generation of signals at various frequencies in the range of up to 15 MHz. Hantek HDG3012B

TDA7297 stereo audio digital amplifier module. The system allows you to connect two speakers with an impedance from 4 to 8 Ω and a power of 15 W

TDA7266 stereo digital audio amplifier module. The system allows you to connect two speakers with an impedance of 4 to 8 Ω and a power of 7 W

This compact board breaks out the pins of a microSD card connector necessary to interface with the card through SPI (Serial Peripheral Interface), and it can be directly integrated into 5 V systems thanks to its on board 3.3 V regulator and level shifting circuity. Pololu 2587

PCB connector, 5-pin, 1-row pitch, 1.25 mm, 1 A PICOBLADE, Molex 53047-0510