Best sellers
There are 16460 products.
Base board for prototyping IoT applications using the new Digi XBee 3 Low-Power LTE-M/NB-IoT and Digi XBee RR modules. It gives access to the full functionality of the XBee module pins, including two USB Type-C connectors for UART communication and firmware updates, a Qwiic connector for I2C-compatible sensors and peripherals. SparkFun WRL-21636
1.47inch Touch LCD is a compact IPS display with touch support, designed for embedded and educational projects. High image quality, low interface requirements, and broad compatibility with popular microcontrollers make it ideal for interactive applications, HMI, and as a graphical user interface in mobile devices and control systems.
An adapter that allows you to connect modules in the XBee format to a computer via the USB Type-C interface. The adapter is based on the FT231XS system. SparkFun WRL-22043
RF module providing wireless communication compliant with the IEEE 802.15.4 standard. They operate in the 2.4 GHz ISM band and enable local configuration via BLE with the Digi XBee mobile application. They are equipped with the Silicon Labs EFR32MG SoC transmitter and receiver chipset. The range in buildings is up to 90 m, while in open space it reaches up to 3200 m. SparkFun WRL-22631
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 300 mA, offering a wide beam angle of 120 °
Z-Pi4 ABS - Case for sbc raspberry pi4, z-pi4 black ABS
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 900 mA, offering a wide beam angle of 120 °
This is an interface cable for the Bus Pirate, designed to connect to its 2x5 I/O header. The cable’s connector is composed of two rows of five 0.1" spaced pins. CAB-09556
Arduino and Breadboard Holder. DEV-11235
Module with 6 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4106
The Micsig SATO2002 is a dual-channel tablet oscilloscope with a 200 MHz bandwidth, offering a maximum sampling rate of 1 GSa/s and a memory depth of 70 Mpts. Equipped with an 8-inch touchscreen LCD, it simplifies automotive diagnostics, including testing charging systems, ignition, and CAN and LIN networks
DC motor equipped with a metal gear 1:90 with a cut shaft on both sides
Yato sandblasting gun (YT-2375) with a maximum air pressure of 0.8 MPa, made of aluminum, is used to clean surfaces using a stream of compressed air and abrasive material, with a set containing a gun, two outlet nozzles, a hose connector and a hose. YT-2375
Vector network analyzer with two ports. It can perform measurements for frequencies from 50 kHz to 4.4 GHz. Equipped with an LCD display, it can be connected to a computer via USB. Nanovna V2 4"
Camera for Raspberry Pi CM3, CM3+ and NVIDIA Jetson Nano. It was equipped with a Sony IMX477R sensor with a resolution of 12.3MPx and a built-in IR filter. Waveshare IMX477 12.3MP Camera
ACeP e-Paper 7-color display with a diagonal of 5.65" and a resolution of 600×448 px. SPI interface. Without PCB. Waveshare 5.65inch e-Paper (F)
Silicone thermal paste used to improve the amount of heat transferred to, for example, a radiator. The paste is resistant to oxidation and operating temperatures ranging from -50 to 200°C. Paste in a cartridge with a capacity of 800 g. AG Termopasty ART.AGT-309
Case for Arduino Mega2560, closed, with access to connectors, black
Module with 6 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4246
