Best sellers

Mini keyboard with three keys (default "Ctrl", "C" and "V") with the possibility of reprogramming the functions performed. It uses the RP2040 microcontroller from Raspberry Pi and offers RGB backlighting. Connects to your computer via a USB Type-C port. Waveshare RP2040-Keyboard-3

Module with 8 voltage analog outputs with a range from 0 to 10 V. It communicates via the RS485 interface and supports communication within the Modbus RTU protocol. The board is enclosed in a housing that can be mounted on an industrial rail. Waveshare Modbus RTU Analog Output 8CH (B)

Micro 5.1:1 planetary gear motor, standard operating voltage 6V, speed 13,000 rpm and torque 0.02 kg*cm (0.3 oz-in). Pololu 2331

Advanced signal generator. It has two independent signal channels. It offers a sampling rate of 300 MSa/s and allows the generation of signals at various frequencies in the range of up to 15 MHz. Hantek HDG3012B

A power supply module with a LiPo and Li-Ion battery charger dedicated to the Raspberry Pi Pico boards. It has a built-in button and over-discharge and overload protection. Pimoroni PIM557

The module with the buffer of the I2C bus based on the TCA4307 system. It allows you to connect I2C devices with active power supply. Equipped with a STEMMA QT connector. Adafruit 5159

Module with a light intensity sensor BH1750. The measuring range is from 1 to 65535 lux, and communication is carried out using the I2C bus. Adafruit 4681

A module with a high precision temperature sensor based on the MCP9808 chip. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5027

Development board with the GW1NR-9 FPGA system. Offers access to 8640 LUT4 logic cells. It has a built-in BL702 debugger, which also serves as a USB-UART converter. The user has LED diodes, user buttons and a microSD card slot at their disposal. In addition, the board provides a 40-pin display connector and an HDMI connector. Sipeed Tang Nano 9K

Development board with GW1NSR-LV4C FPGA. Offers access to 4608 LUT4 logic cells. It has a built-in JTAG debugger. The board provides a camera connector and an HDMI connector. Included with the OV2640 camera. Sipeed Tang Nano 4K Kit

Development board with GW1NSR-LV4C FPGA. Offers access to 4608 LUT4 logic cells. It has a built-in JTAG debugger. The user has LED diodes and user buttons at their disposal. In addition, the board provides a camera connector and an HDMI connector. Sipeed Tang Nano 4K

Development board with the GW1NZ-1 FPGA system. Offers access to 1152 LUT4 logic cells. It has a built-in JTAG debugger. The board also provides a display connector. Sipeed Tang Nano 1K

Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 200 MHz and the ability to measure voltage up to 3000 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP3002

Active GNSS antenna u-blox ANN-MB1 multi-band dedicated to precise location determination. It offers support for the L1, L5, E5a, B2a and NavIC bands and is equipped with a 5-meter antenna cable with an SMA connector. SparkFun GPS-23814

Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 200 MHz and the ability to measure voltage up to 1500 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP1502

Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 100 MHz and the ability to measure voltage up to 3000 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP3000

Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 100 MHz and the ability to measure voltage up to 1500 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP1500

Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 100 MHz and the ability to measure voltage up to 700 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP700

Module with CO2, temperature and humidity sensor SCD-30. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4867