Best sellers

Gravity: Analog Signal Isolator is a module that allows to isolate sensors in the system and eliminate mutual interference of sensors powered by 5V. DFRobot DFR0504

Module with 5 balancing sensors for Balboa 32U4 balancing robot. Pololu 3577

USB - RS485 converter designed to convert USB signal to serial signal. It is used to connect devices with USB interface to RS485 network. It uses the galvanic isolation technology of ADI (Analog Devices iCoupler). EVC8001

Module with 8 inputs for data acquisition from 0-24 mA analog current inputs. It communicates via RS485 interface and supports Modbus RTU protocol. The board is enclosed in an industrial enclosure. GM1008

RS485 hub with signal amplifier function and built-in RS232 to RS485 converter. It is equipped with one RS485 input port and one RS232 port, and 8 RS485 output ports. Designed for communication within industrial networks. YN-1208

A 6-in-1 universal interface converter that supports serial interfaces used in industry: USB, RS485 , RS422, RS232 and UART TTL. YN-4561

Vibration damper for NEMA23 engines (Damper). It attenuates the vibrations and vibrations occurring at engine operation. Dimensions: 56x56x6mm

Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 12 V and draws a current of 0.4 A per coil. 42BYGHW208

STSPIN220 stepper motor driver module with a low voltage range of 1.8 ... 10V and 1.1A working current. The controller allows you to control the motor motion up to 9 different resolutions (up to 1/256 steps). Pololu 2876

LiDAR sensor using distance measurement technology based on the principle of triangulation. It offers a measurement range from 25 to 300 mm and a measurement frequency of 28 Hz, thanks to which it ensures fast and effective data acquisition in various environmental conditions. DFRobot DFR1030

Module with 8 inputs for data acquisition from 0-24 mA analog current inputs. It communicates via Ethernet interface and supports Modbus TCP protocol. The board is enclosed in an industrial enclosure. GM4008

The SD3031 precision real-time clock (RTC) module. It has an integrated quartz resonator, on-board SRAM and communicates via an I2C interface. DFRobot DFR0998

The eMMC 5.1 flash memory module for Hardkernel Odroid XU4 computers. 32GB capacity, Android operating system installed. The set includes a microSD adapter. Hardkernel

25AA256-I/SN, EEPROM memory, SPI, 256K, SOIC8

Module with 8 relays with a maximum switching current of 2 A. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP8025ADAM

Vorel cast iron vice, swivel for fixing to the table with a pressure screw. Maximum opening: 75 mm. Vorel 36018

DAC converter module with current output in the range of 0 to 25 mA. It is powered by 18 V to 24 V and communicates via I2C interface (Gravity connector). It is used as a controller in industrial applications. DFRobot DFR0972

JTAG/SWD debug probe with USB-C interface. Based on a 32-bit RISC CPU, it can communicate at high speed with the supported target CPUs. J-Link is used around the world in tens of thousand places for development and production (flash programming) purposes. J-link PLUS Compact (8.19.28)

J-Link BASE is a USB powered debug probe supporting a large number of CPU cores. Based on a 32-bit RISC CPU, it can communicate at high speed with the supported target CPUs. J-link BASE Compact (8.19.00)