Best sellers
There are 16490 products.
STM32 Nucleo-144 development board with STM32F722ZE MCU, supports Arduino, ST Zio and morpho connectivity
RS485 communication board, SP3485 on board, 3.3V
This RGB LED HAT can be easily attached on top of the Raspberry Pi to display colorful effect, and controlled by only one signal pin.
Switching power supply with a power of 102 W, an output voltage of 12 V and a current of 8.5 A. It has built-in overload and short-circuit protection and a low profile housing. Mean Well LRS-100-12
LCD-TFT touchscreen display 3.5 "(420x320 pixels) with LED backlight The display has a built-in ILI9488 controller, designed for Odroid C0, C1 +, C2 and XU4 computers
Module with BME680 sensor for measuring the concentration of volatile organic compounds (VOC), pressure, temperature and humidity. I2C or SPI communication. DFRobot SEN0375
OLED display 128x64 pixels, white characters / black background, 1.3-3V power supply, SSD1306 or SH1106G controller, communication via I2C and SPI interfaces, PARALLEL WHITE display color, working temperature from -40 to +70, ext. CAP
The X-NUCLEO-IHM14A1 motor driver expansion board is based on the STSPIN820 monolithic driver for stepper motors.
Bluetooth 5.2 communication kit. It uses the STM32WB15CC microcontroller (320 kB Flash, 48 KB SRAM, ARM® Cortex®-M4 and Cortex®-M0+). STMicroelectronics NUCLEO-WB15CC
The S9V11F3S5C3 switching step-up/step-down regulator efficiently produces a fixed 3.3 V (default) or 5 V (selectable) output whether it is higher or lower than the input voltage, which can range from 3 V to 16 V. The regulator also has fixed 3.3 V low-voltage cutoff with hysteresis that can be used to prevent battery over-discharge.
The FS5106B is a general-purpose, low-cost standard analog servo from FEETECH. Two ball bearings help reduce friction and improve performance. Servo horns and associated hardware are included.
Key specs at 6 V: 0.16 sec/60°, 80 oz-in (6 kg-cm), 41 g
Arduino MKR1000 Wifi with Headers
Digital humidity and temperature sensor, RoHS
32-bit microcontroller with ARM Cortex-M4 core MCU + FPU, Ultra-low-power, 2MB Flash memory, 640KB SRAM memory, LCD-TFT & MIPI DSI, LQFP144, STM
32-bit microcontroller with ARM Cortex-M4 core MCU + FPU, Ultra-low-power, 2MB Flash memory, 640KB SRAM, LCD-TFT & MIPI DSI, ext. SMPS, LQFP100
1/9" CMOS VGA (640x480) image sensor with OmniPixel3-HS™ technology. ArduCAM B0070
The Tic T834 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC).
Camera module with an OV5642 matrix with a resolution of 5 MPx and a size of 1/4 "with output in JPEG format. The transmission speed in the full resolution of 2592 x 1944 pixels is 15 fps. It is equipped with an M12x0.5 1/4 \'\' lens. The device works with 3.3 V, it communicates via a parallel interface. ArduCam B0020
STM32 Nucleo-144 development board with STM32F412ZG MCU, supports Arduino, ST Zio and morpho connectivity