Best sellers

The Rebel 1600 W heat gun offers two operating modes and a lightweight, ergonomic design, making it a functional tool for workshop, renovation and installation work. It allows safe use both horizontally and vertically.

Cypress EZ-USB FX2LP USB Microcontroller, TQFP128, RoHS

Cypress EZ-USB FX2LP USB Microcontroller, TQFP100, RoHS

This is a simple to use motion sensor. Power it up and wait 1-2 seconds for the sensor to get a snapshot of the still room. This unit works great from 5 to 12V (datasheet shows 12V). You can also install a jumper wire past the 5V regulator on board to make this unit work at 3.3V. Sensor uses 1.6mA@3.3V. SEN-13285

MPPT charge controller module designed for photovoltaic systems. It can charge one lithium-polymer cell, and thanks to MTTP technology, optimal charging parameters are used for the prevailing conditions. SparkFun PRT-12885

AVT kit for self-assembly of the amplified power regulator of 230 VAC receivers. AVT1860 B

32-bit microcontroller from the STM32F7 family with ARM Cortex-M7 core, 512kB Flash memory, 320kB SRAM, I2C, SPI, UART / USART memory, USB, CAN, 1.7 ... 3.6V, 144LQFP, STM, RoHS

MicroMod main module equipped with Bluetooth 5.0 Sparkfun Artemis. Equipped with an M.2 connector, it can work with MicroMod expansion boards. SprakFun DEV-16401

Module with a soil moisture sensor for the M5Stack sets. It has an analog output and a digital output with adjustable reaction threshold. M5Stack U019

Pimoroni Pico LiPo 2 XL W PIM776 is an extended development board with the RP2350B, offering Wi-Fi and Bluetooth connectivity, 16 MB of flash memory and 8 MB of PSRAM. Thanks to its 40 GPIO pins, integrated LiPo charging system and numerous interfaces, it works well in advanced IoT projects and battery-powered systems.

Easy PET-G filament in Vertigo with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G Vertigo

Dreamer Nano V4 - Arduino Leonardo compatible; ATmega 32U4

Pimoroni Pico LiPo 2 PIM775 is an advanced development board with the RP2350B, 16 MB of flash memory and 8 MB of PSRAM, created with battery-powered projects in mind. Thanks to the Qw/ST, SP/CE and JST connectors and the built-in LiPo charging system, it enables quick prototyping of mobile devices and remote IoT systems.

The ED-LENS-M12-230430-08 lens with a 4.3 mm focal length provides a wide 90° field of view on 1/2.3" sensors, making it ideal for monitoring, image analysis, and IoT projects. Compatible with the Raspberry Pi M12 High Quality camera module and other M12 interface cameras, it offers precise optics and easy installation.

Module with IPS touch LCD display with a diagonal of 4.3" and a resolution of 800x480 pixels. It uses a 24-bit parallel interface for displaying the image and I2C for the touch panel. Waveshare 4.3inch Capacitive Touch LCD

Easy PLA filament in graphite, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA Graphite

Communication module with the SIM800C system designed for Raspberry Pi minicomputers. Adds support for GSM/GPRS networks. Waveshare SIM800C GSM/GPRS HAT

The 10.1-inch Raspberry Pi 5-based HMI module, with 4 GB RAM, 32 GB SD card and M.2 SSD slot, offers versatility in IoT and industrial automation applications. Equipped with a Broadcom BCM2712 (Cortex-A76, 2.4 GHz) processor, dual-band Wi-Fi, Bluetooth 5.0, dual 4Kp60 HDMI output, RS232/RS485, and a 1280x800 touchscreen, it provides performance, reliability and precise operation in harsh environments. Edatec ED-HMI3020-101C-04320

PCB and programmed circuit for universal electronic lock / immobilizer. AVT3129 A +

Digital microscope with USB interface. It is equipped with an image sensor with a resolution of 2 MPx and a magnification factor of up to 500 times. It can be connected to a Windows computer. Andonstar V160