Pimoroni Pico LiPo 2 XL W development board – RP2350B, 16MB Flash, 8MB PSRAM, Wireless/Bluetooth, USB-C, LiPo – PIM776
ID: 1202072
769894026991
zł152.88
Tax included
zł124.29 tax excl.
Pimoroni Pico LiPo 2 XL W PIM776 is an extended development board with the RP2350B, offering Wi-Fi and Bluetooth connectivity, 16 MB of flash memory and 8 MB of PSRAM. Thanks to its 40 GPIO pins, integrated LiPo charging system and numerous interfaces, it works well in advanced IoT projects and battery-powered systems.
Description
An extended version of the development board with the RP2350B microcontroller, equipped with the Raspberry Pi Radio Module 2 providing 2.4 GHz wireless and Bluetooth connectivity. Integrated LiPo/Li-Ion battery support with the MCP73831 charging system and XB6096I2S protection enables direct battery power and charging via USB-C. The board includes 16 MB of QSPI flash memory, 8 MB of PSRAM, POWER and BOOT buttons, LEDs indicating power and charging status, and a JST PH connector for attaching a battery.
The board offers 40 GPIO pins arranged in two rows of 30 pins, making it suitable for more complex projects. The Qw/ST connector simplifies connecting I2C modules, the SP/CE connector enables SPI/UART communication, and the 3-pin JST-SH debugging connector provides access to the SWD interface. Compatibility with Raspberry Pi Pico add-ons requires placing them near the USB port due to the extended board design.
Properties
- RP2350B chip (Dual Arm Cortex M33, up to 150 MHz, 520 KB SRAM)
- 16 MB QSPI flash memory with XiP support
- 8 MB PSRAM
- Raspberry Pi Radio Module 2 (2.4 GHz Wi-Fi and Bluetooth)
- MCP73831 charging system, 215 mA charging current
- XB6096I2S battery protection
- USB-C connector for power, programming and data transmission
- Qw/ST connector (Qwiic/STEMMA QT) for I2C devices
- SP/CE connector for SPI/UART devices
- 3-pin JST-SH debugging connector (SWD)
- BOOT button (user function and DFU)
- POWER button for power management
- LEDs: power, charging, user
- Built-in 3.3 V regulator (maximum current output 600 mA)
- Supply voltage range: 3 V – 5.5 V
- JST PH 2-pin battery connector with marked polarity
- Two 30-pin rows, 40 GPIO total
- Compatibility with Raspberry Pi Pico extensions (on the USB side)
1202072
Data sheet
- Microcontroller
- RP2350
- Flash memory
- 16 MB
- Number of I/O
- 40
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- No
- MicroSD slot
- No
- Length
- 77 mm
- Width
- 21 mm
- USB connector type
- USB type C
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Raspberry Pi Pico W soldered board module dedicated to matrix displays with HUB75 interface. Pimoroni PIM662
zł106.76
4 weeks
No product available!
A board with an RP2040 microcontroller and a radio module operating in the 868 MHz frequency band. It has a built-in LiPo charging circuit and a STEMMA QT connector. Adafruit 5712
zł121.44
24h
Available quantity: 3
Available
A board with an RP2040 microcontroller and a LoRa RF95 module operating in the 868 MHz frequency band. It has a built-in LiPo charging circuit and STEMMA QT connector. Ideal for IoT projects. Adafruit 5714
zł177.72
4 weeks
No product available!
Board with RP2040 microcontroller and HDMI video connector. Has a built-in LiPo charging circuit and STEMMA QT connector. Allows the use of the Feather module to display data on a monitor. Adafruit 5710
zł85.77
24h
Available quantity: 3
Available
The RP2040 microcontroller board features two ARM Cortex-M0+ cores running at 133 MHz, 264 kB of RAM. The board also features 2 MB of QSPI flash memory and an FPC connector. It comes with a USB adapter. Waveshare RP2040-Tiny-Kit
zł25.03
4 weeks
No product available!
The RP2040 microcontroller board features two ARM Cortex-M0+ cores running at 133 MHz, 264 kB of RAM. The board also features 2 MB of QSPI flash memory and an FPC connector. The chip can be programmed in C/C++ or MicroPython. Waveshare RP2040-Tiny
zł19.68
4 weeks
No product available!
A 1.28" circular IPS LCD display module with touch panel. It has a resolution of 240x240 px and is controlled by an RP2040 microcontroller. It is equipped with an accelerometer and a gyroscope. Waveshare RP2040-Touch-LCD-1.28
zł96.67
24h
Available quantity: 4
Available
Ethernet module with RP2040 microcontroller. It has an embedded CH9120 chip with an integrated TCP/IP protocol stack. The chip can be programmed in C/C++ or MicroPython. Waveshare RP2040-ETH
zł54.00
24h
Available quantity: 14
Available
Board with RP2040 microcontroller and MCP2515 CAN controller. It has a built-in LiPo charging circuit and a STEMMA QT connector. It allows you to add communication based on the CAN bus to the project, commonly used in projects related to robotics and the automotive industry. Adafruit 5724
zł93.95
4 weeks
No product available!
Board with RP2040 microcontroller and class D mono audio amplifier based on MAX98357 chip. It has a built-in LIS3DH three-axis accelerometer, an RGB NeoPixel LED, a LiPo charging circuit, and a STEMMA QT connector. Adafruit 5768
zł122.47
24h
Available quantity: 4
Available
Board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores and a 5x5 RGB LED matrix. There is also 2 MB of QSPI flash memory on the board. The circuit can be programmed in C/C++ or MicroPython. Waveshare RP2040-Matrix
zł31.64
24h
Available quantity: 3
Available
Development board equipped with the Raspberry Pi Pico W module. It is an interesting alternative to Arduino Uno boards. It has a compatible shape and pin layout, while making available the large resources offered by the RP2040 microcontroller. Can be programmed with Arduino, MicroPython and CircuitPython. SB Components 26630
zł94.85
24h
Available quantity: 3
Available
Development board based on the RP2040 microcontroller. It is equipped with a 1.14" color LCD display and a built-in debugging tool via USB interface. The board is enclosed in a plastic housing. Waveshare RP2040-GEEK
zł44.43
4 weeks
No product available!
A board with an RP2040 microcontroller equipped with two ARM Cortex-M0+ cores that operate at a frequency of 133 MHz and 264 kB RAM. There is also 16 MB of QSPI Flash memory on the board. The system can be programmed in C/C++ or MicroPython. It offers a DVI connector, a micorSD card slot and a 40-pin GPIO connector. The module has a shape and connector arrangement similar to the popular Raspberry Pi Zero minicomputers. Waveshare RP2040-PiZero
zł42.18
24h
Available quantity: 1
Available
Versatile digital video module. It uses two RP2040 chips (one in the form of a Raspberry Pi Pico W board and the other as a separate RP2040 microcontroller) and is equipped with an HDMI output connector. Pimoroni PIM686
zł362.44
24h
Available quantity: 2
Available
Versatile digital video module. It uses two RP2040 chips (one in the form of a Raspberry Pi Pico W board and the other as a separate RP2040 microcontroller) and is equipped with an HDMI output connector. Pimoroni PIM674
zł244.45
24h
Available quantity: 2
Available
Pimoroni Pico LiPo 2 XL W PIM776 is an extended development board with the RP2350B, offering Wi-Fi and Bluetooth connectivity, 16 MB of flash memory and 8 MB of PSRAM. Thanks to its 40 GPIO pins, integrated LiPo charging system and numerous interfaces, it works well in advanced IoT projects and battery-powered systems.