Best sellers
There are 16461 products.
YATO YT-05640 Allen key set.
Robot controller dedicated to Totem sets. It is equipped with Bluetooth communication, so it can be controlled using a smartphone. TMK-X3K totem
Set with WEP 928D-I soldering iron, stand, suction device, tin, solder paste, tweezers and a set of 5 tips. The elements are placed in a handy cover. WEP 928D-I KIT
Antimagnetic, bent, sharp tweezers, made of stainless steel, resistant to most solvents and cleaning agents
The expansion board is designed to work with Alchitry Au and Alchitry Cu. The board has four 7-segment LED displays, five buttons, 24 LEDs and 24 DIP switches. SparkFun DEV-16525
At the Feather M0\'s heart is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic, the same one used in the new Arduino Zero. This chip has a whopping 256K of FLASH (8x more than the Atmega328 or 32u4) and 32K of RAM (16x as much)! This chip comes with built in USB so it has USB-to-Serial program & debug capability built in with no need for an FTDI-like chip. Adafruit 3179
Board for applications in the area of the Internet of Things (IoT). The module is based on the ESP-WROOM-32E system with 240 MHz clock, equipped with 4 MB Flash and 520 KB SRAM, as well as WiFi and Bluetooth communication. DFrobot DFR0654-F
The SST Liquid Level Sensor provides single point liquid detection via a TTL compatible push/pull output. This optical liquid level sensor features a miniature design that allows for installation in areas where space is limited. SEN-13835
4" LCD IPS display with touch screen. The display is equipped with a DPI interface for image display and I2C interface for a touch screen. Resolution 720x720 pixels. Waveshare 4inch DPI LCD (C)
PCIe connector adapter to 4 USB 3.2 Gen1 slots designed to work with Raspberry Pi CM4 modules. It allows you to connect devices with a USB connector to the base board via a PCIe connector. Waveshare PCIe TO USB 3.2 Gen1 (B)
IS31FL3731 LED Matrix Opto Feather Platform Evaluation Expansion Board. COOL WHITE matrix. Adafruit 3138
Board with the NB-IoT SIM7020E module designed for the Raspberry Pi Pico. It communicates via the UART interface and AT commands. Waveshare Pico-SIM7020E-NB-IoT
Development kit with QN9090 (T) Bluetooth LE 5.0 module complete with base board and expansion board. It is powered by the USB connector or from an external source via the DC connector. NXP QN9090-DK006
Prototype board designed to work with Alchitry Au and Alchitry Cu. There are prototype holes on the board with a 2.54 mm raster connected to the board connectors. SparkFun DEV-16524
24-channel portable logic analyzer with 16-channel digital waveform generator. Digilent 410-338
Module with a 3-axis BMA220 digital accelerometer with a configurable measuring range of ± 2/4/8/16 g. It is supplied with the voltage from 2 to 3.6 V and communicates via the I2C or SPI interface. DFRobot SEN0168
T13 soldering tip with a K-type cut tip designed for the Bakon BK950D station
Miniature vibration motor type 8034 powered with the voltage from 3 to 5 V with dimensions of 8 x 3.4 mm.
A computer with an Amlogic S922X processor that integrates a quad-core ARM Cortex-A73 chip and a dual-core Cortex-A53 with a Mali-G52 graphics processor and 2GB of RAM. Additional equipment includes: Gigabit Ethernet, eMMC memory slot, HDMI 4K, microSD card slot and 40-pin GPIO connector. Hardkernel Odroid N2+
Camera set with IMX477 sensor with 12 MPx matrix, allows for remote camera rotation, tilt angle and zoom control. Works with Raspberry Pi minicomputers. Swivel base included. ArduCAM B0167B12