Best sellers
There are 16718 products.
Mounting bracket with a magnifying glass with a diameter of 85mm, with grippers, a spiral for a soldering iron, a cleaner and a sponge to clean the tip, a space for rosin and LED backlight. ZD-10Y
ToF (Time of Flight) laser distance sensor with built-in MCU and distance measurement algorithm. The sensor can measure up to 5m with an accuracy of ±1.5 cm and a resolution of 1 mm. Waveshare TOF Laser Range Sensor
Module with a 3-color (red, black, white) e-Paper display with a diagonal of 12.48" and a resolution of 1304x984 px. SPI interface. Waveshare 12.48inch e-Paper Module (B)
Module with a 3-axis BMA400 accelerometer with a measuring range up to ± 16g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020582
Tamiya double gear dedicated to small mobile robots. It is made of plastic modes that can be adjusted to two gears: 58:1 and 203:1. Pololu 61
Metal case with fan hole and a camera holder. Designed for the NVIDIA Jetson Nano development kit. Jetson Nano Case (C)
Module with real time clock (RTC) PCF85063TP and CR1225 battery socket. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 102020083
8 Mpx camera module with IMX219 sensor with low distortion lens. The camera is intended for use as a replacement on the RPI Camera Board V2. ArduCAM B0184
Module with a 3-axis accelerometer with a resolution of 13bit (ADXL345), RoHS
Gamepad module with joystick and buttons designed for micro:bit development kit. Its shape and design resemble that of a portable game controller. DFRobot DFR0536
Digital IR distance sensor operating on the basis of a modulated signal with a frequency of 38 kHz. It can detect objects at a distance of up to 60 cm and is powered with a voltage from 4.5 to 5.5 V. Cytron MAKER-OBJECT
The Pololu MinIMU-9 v5 is an inertial measurement unit (IMU) that packs an LSM6DS33 3-axis gyro and 3-axis accelerometer and an LIS3MDL 3-axis magnetometer onto a tiny 0.8″ × 0.5″ board.
Graphic display 128x32 pixels, 67.5x25.2mm, COG TYPE, FSTN Positive, 3.3V UC1601, I2C and SPI, White LED backlight, 18mA, RoHS
The Pololu Pushbutton Power Switches are sophisticated power control alternatives to bulky mechanical switches. The main function is pushbutton-based latching power control, where one push turns on power and another push turns it off.
Bluetooth 5.2 communication kit. It uses the STM32WB15CC microcontroller (320 kB Flash, 48 KB SRAM, ARM® Cortex®-M4 and Cortex®-M0+). STMicroelectronics NUCLEO-WB15CC
This breadboard-compatible module is an alternative to bulky power switches. It uses a small integrated slide switch to control a high-side power MOSFET that can deliver continuous currents up to around 16 A at 4.5 V to 40 V. The board features reverse-voltage protection and also makes it easy to control the MOSFET with an external switch or the digital output of a microcontroller.
Module with 1 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4201
5" AMOLED display with touch screen. Equipped with HDMI interface for image display and USB for touch screen. Resolution 960x544 pixels. Waveshare 5inch HDMI AMOLED
Li-Po battery with a rated voltage of 3.7 V and a capacity of 250 mAh, equipped with a PCM protection and a 2.5 JST-RCY connector. Akyga LP601730
NFC module with built-in antenna on the board. The module has a Gravity connector. Memory communication can be done through one of the serial interfaces: UART or I2C. DFRobot DFR0231-H