Best sellers

A test lead with a 4 mm banana plug on one end and an insulated alligator clip on the other allows for easy and safe connections in various testing applications. Thanks to its flexible cable and standard connectors, it is compatible with most measuring devices, such as multimeters and oscilloscopes. The insulation on the alligator clip provides additional protection during use, enhancing workplace safety.

The internal WiFi antenna with a 3 dBi gain, supporting 2.4 GHz and 5.8 GHz frequency bands, provides stable wireless connections for devices such as Mini PCI cards, cameras, USB adapters, and network routers. Available with RP-SMA or SMA connectors, it ensures easy integration with a variety of network equipment. Its flexible rubber construction allows for optimal positioning to achieve the best signal.

STM3210C-EVAL is an advanced evaluation board designed for designing and testing applications using the STM32F107VCT microcontroller. It offers a rich set of communication interfaces and peripherals, enabling the development of networking, multimedia, and industrial applications.

A sensor that detects the concentration of carbon monoxide. Equipped with a factory calibrated probe. It communicates via the I2C interface, UART or analog output. DFRobot SEN0466

Sensor that detects the concentration of ozone. Equipped with a factory calibrated probe. It communicates via the I2C interface, UART or analog output. DFRobot SEN0472

Set of 65 modules and sensors. It can be used with popular development boards including Arduino, STM32 and Raspberry Pi

Non-contact, capacitive liquid level sensor with flexible probe. It allows you to detect the presence of, among others water in non-metallic containers. DFRobot SEN0508

RS422 to TTL converter module based on MAX490 for long-distance bidirectional serial communication, up to 1000 meters, with a transmission speed of up to 2.5 Mbps. Equipped with ESD protection up to 15 kV, TVS diodes and 120 Ω terminating resistors, it provides stability and immunity to interference in demanding industrial conditions. Powered by 5 V, it works with TTL logic and is compatible with popular platforms, and LED indicators facilitate diagnostics and integration.

Module with BME280 pressure, humidity and temperature sensors and LTR-559 light sensors. Dedicated to the construction of a weather station based on the Raspberry Pi. Pimoroni PIM585

A solar cell with a power output of 0.7 W and a voltage output of 5.5 V, measuring 95 x 95 x 3 mm, equipped with pads for soldering wires. Ideal for powering small electronic devices in DIY projects.

The official extension module (HAT) dedicated to the Raspberry Pi. It allows you to control LEGO SPIKE Prime motors and service LEGO sensors. Raspberry Pi SC0622

Base board dedicated to NVIDIA Jetson Nano modules. It offers numerous connectors, including M.2 Key E, 40-pin GPIO, Ethernet, USB 3.0, and HDMI and DisplayPort outputs. Waveshare JETSON-IO-BASE-A

The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5252

USB 3.0 Type A Panel-Mount Connector IP68 with 0.5 m Cable is a durable and secure solution for applications requiring protection against external factors. Ideal for industrial control systems, outdoor electronics, machinery, and off-road vehicles where reliable USB connectivity is essential.

The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5262

USB converter module - FIFO, FT245 with mini USB and goldpin connector

The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.

CAN module based on MCP2551 and MCP2515 systems with an OBD-II compatible connector. It uses the I2C or UART bus (Grove connectors) for communication. Seeed Studio 103030215