Best sellers

Step-Down converter module with input voltage from 4.75 to 23V, output voltage from 1 to 17V and output current 1.8 A (3 A instantaneous current).

Extension module for Raspberry Pi. It allows you to control two DC motors, support encoders, 4 servos, IMU 9DoF and connect Qwiic modules. SparkFun ROB-16328

LCD IPS module with a screen diagonal of 2" and a resolution of 320x240 pixels. The display has a built-in ST7789V driver and communicates via the SPI interface. The display can also work via the GDI port. DFRobot DFR0664

A desoldering station with a heating capacity of 80W, with a ceramic heater, temperature 160...480°C. ZD-915

JST-SH 4-pin SMD connector for modules with Qwiic connectors. Pins\' pitch is 1 mm. Qwiic allows you to connect sensors via the I2C bus. SparkFun PRT-16766

Evaluation kit with SiFive Freedom E310 RISC-V (ISA) microcontroller. It has 32MB QSPI flash memory, NXP K22 ARM Cortex-M4 for USB and JTAG, and a Qwiic and USB Type-C connector. SparkFun DEV-15799

Module with 2-channel DC motor driver. It allows you to control the drive with a supply voltage from 3 to 11 V and a current of 1.2 A (1.5 A instantaneous). I2C communication. SparkFun ROB-15451

The camera set with the Sony IMX219 sensor allows you to remotely rotate the camera, control the angle of inclination and zoom. Works with all versions of the Raspberry Pi. The camera is equipped with a matrix with a resolution of 8 MPx. ArduCAM B01678MP

The camera module with the Sony IMX219 sensor works with all versions of the Raspberry Pi. The camera is equipped with a matrix with a resolution of 8 MPx. ArduCAM B0153

The camera module with the Sony IMX219 sensor with motorized IR filter. Works with all versions of the Raspberry Pi. The camera is equipped with a matrix with a resolution of 8 MPx. ArduCAM B0154

Module with an ambient oxygen concentration sensor. The system allows you to measure the oxygen volume in the range up to 25% with a resolution of 0.15%. The module communicates via the I2C interface. DFRobot SEN0322

15.6" LCD display with touch screen. The display is equipped with HDMI interface for image display and USB for touch screen. High resolution 1920x1080 pixels. Waveshare 15.6inch HDMI LCD (for EU)

Module with a black and white OLED display with a diagonal of 1.3". It has a resolution of 128x64 pixels and a SH1107 controller. Communication with the module is carried out via the I2C or SPI interface. WSH 1.3inch OLED Module (C)

Analog voltage divider module. It enables a 5-times reduction of the input voltage. DFRobot DFR0051

LPC55S14JBD64E, ARM Cortex-M33 Microcontroller, 32 bit, 150 MHz, 128 KB Flash, HTQFP64

A set of two Pololu wheels with dimensions 40x7mm in black. Intended for Micro servos with 4.8mm diameter spline and 20 teeth. Pololu 4905

The plow is intended for use with the Zumo 32U4 robot. The plow is made of thick, laser cut stainless steel and is supplied with a plastic handle for the sensor plate. Pololu 3121

VisionSOM-8Mmini is comprised of a powerfull NXP quad core processor (i.MX 8M mini = 4x Cortex-A53 core @ 1.8GHz + Cortex-M4 core @ 400MHz), 2GB LPDDR RAM, 8GB eMMC and Murata WiFi/BT module, 0...70C

SLS23X8MMQC_1800C_02GR_08GE_1WB_C

Set with HQ camera and 6 mm wide-angle lens. The set works with all versions of Raspberry Pi minicomputers with a CSI socket. ArduCAM B0240

Development board designed for IoT projects. It is equipped with a WiFi/Bluetooth module ESP32, LoRa 433 MHz, GPS and a basket for a Li-Ion 18650 battery. TTGO T-Beam V1.2