ArduCAM Sony IMX477 12MP PTZ Camera for Raspberry Pi
ID: 585057
5906623403592
zł651.90
Tax included
zł530.00 tax excl.
The camera set with the Sony IMX477 sensor allows you to remotely control zoom. Works with all versions of the Raspberry Pi. The camera is equipped with a matrix with a resolution of 12 MPx. ArduCAM B016712MP
Description
Camera module with Sony IMX477 sensor allows you to remotely control zoom. Works with all versions of Raspberry Pi, including: Raspberry Pi 4 model B, Raspberry Pi 3 model B+ , Raspberry Pi 3 model B. The sensor used has a matrix with a resolution of 12 MP and allows you to record video in the format 1920×1080 @ 60fps. It has a built-in IR filter. The module is attached to the Raspberry Pi via a dedicated socket. It uses a CSI interface specifically developed for use with cameras. The board has small dimensions - 36 mm x 36 mm. The camera is supported by the latest version of the Raspbian operating system. The camera module comes with a movable PTZ lens and a control board.
Features
- Works with all versions of the Raspberry Pi
- Matrix: Sony IMX477
- Matrix resolution: 12.3 MP
- Optical Size: 1/2.3″
- Pixel Count: 4056(H) x 3040(V)
- Pixel Size: 1.55 µm x 1.55 µm
- The lens can be replaced
- PTZ lens
- IR sensitivity: Optional with additional Motorized IR-Cut filter
- Video Modes on Raspberry Pi: 1080p30, 720p60 and 640 × 480p60/90
- Frame Rate on Jetson Nano/Xavier NX:1920×1080 @ 60fps,4032×3040 @ 30fps
Kit contains
- Sony IMX477 12MP camera module
- PTZ lens
- Control board
- FFC/FPC 15-pin 15 cm tape
- XH2.54 Jumper wire with 6Pin Famale Connector
585057
Data sheet
- Resolution
- 12,3 MPx
- Interface
- CSI
- Sensor
- Sony IMX477
- IR filter
- Yes
- Lens assembly
- none
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł220.90
24h
Available quantity: 107
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł252.90
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł348.90
24h
Available quantity: 105
Available
NVIDIA Jetson AGX Xavier Developer Kit 32GB - Development kit with NVIDIA Carmel ARM v8.2 + 32GB RAM
Development kit with SoC chip containing eight 64-bit ARM v8.2 cores and a Volt graphic layout consisting of 512 cores supporting CUDA, cuDNN and TensorRT technology. NVIDIA Jetson AGX Xavier Developer Kit 32GB 945-82972-0045-000.
zł5,758.61
Delivery date unknown
No product available!
NVIDIA module with ARM Cortex A57 1.43GHz CPU and Maxwell graphics chip consisting of 128 cores supporting CUDA technology. The module has DDR4 4GB RAM memory. NVIDIA Jetson Nano Module
zł694.61
24h
Available quantity: 1
Available
Jetson Nano Dev Kit with ARM Cortex-A57 1.43 GHz CPU, 4 GB RAM and NVIDIA Maxwell GPU - Waveshare...
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
zł1,028.98
24h
Available quantity: 3
Available
Other products in the same category (16)
This Raspberry Pi-compatible camera offers automatic and manual focus control via Python scripts and the OpenCV library. Equipped with an 8MP Sony IMX219 sensor and a wide 77.6° field of view, it\'s ideal for drones, robotics, surveillance systems, and medicine. Its compact design and easy setup make it ideal for both hobbyists and professionals. ArduCAM B0393
zł101.61
24h
Available quantity: 1
Available
Camera with a resolution of 5 MPx with a USB interface. Equipped with a CMOS OV5648 sensor and a microphone. ArduCAM UB0238
zł153.04
24h
Available quantity: 5
Available
Kit with AR0234 2.3 MP camera, USB 2.0 adapter and USB cable. ArduCAM EK031
zł802.67
24h
Available quantity: 1
Available
Camera with a resolution of 8 MPx with a USB interface. Equipped with CMOS IMX179 sensor with 105° lens, microphone and housing. ArduCAM UB022901
zł523.14
4 weeks
No product available!
Miniature camera module with OV5647 5MP sensor dedicated to Raspberry Pi Zero and Compute Module. Equipped with a lens with a viewing angle of 160°. ArduCAM B006605
zł105.26
24h
Available quantity: 1
Available
Camera with CMOS sensor GC0308 with a resolution of 640x480 px. Equipped with motion detection, it communicates via a parallel interface. ArduCAM U6031-LEN
zł16.42
24h
Available quantity: 6
Available
The camera module equipped with a modern Sony IMX708 sensor with a resolution of 11.9 MP, offers high quality photos and videos in Full HD resolution, ideally suited to demanding lighting conditions thanks to the HDR mode. With an advanced autofocus system, built-in IR-cut filter and full compatibility with the libcamera and Picamera2 libraries, the module is a versatile solution for applications in nature photography, monitoring and AI projects. ArduCAM B0306
zł226.94
24h
Available quantity: 3
Available
Module with IMX298 sensor working with NVIDIA Jetson Nano. The sensor used has a 16 MP matrix and allows you to record video at resolutions of 16MP/30fps. Acrylic case included. ArduCAM B0214
zł457.77
24h
Available quantity: 1
Available
Camera module with OV5647 sensor that works with Raspberry Pi. It has an integrated IR filter and a Fisheye lens with a 220° viewing angle. ArduCAM B0428
zł167.27
24h
Available quantity: 4
Available
The OV5640 camera module is a 5-megapixel unit with a lens with a viewing angle of 110 degrees and a 24-pin connector. It is equipped with an IR Cut switch and a 70-mm cable, which allows it to automatically switch between day and night modes.
zł50.06
4 weeks
No product available!
Intelligent image sensor with LoRaWAN communication dedicated to applications such as image recognition, people counting, object detection, etc. Supports TensorFlow Lite models. Seeed Studio 101990962
zł469.04
24h
Available quantity: 2
Available
The IMX219-130 camera with a 130° field of view and 8 MP resolution, designed for Jetson Nano and Xavier NX, enables wide field image capture in machine vision and AI projects. Equipped with a MIPI interface, 1.88 mm lens, and IR filter, it provides high image quality with low distortion.
zł106.12
4 weeks
No product available!
Camera module designed for minicomputers Raspberry Pi. The camera is equipped with a Sony IMX477 sensor with a lens and an IR-CUT filter. ArduCAM B0270
zł339.98
24h
Available quantity: 2
Available
Camera with a resolution of 8 MPx with a USB interface. Equipped with CMOS IMX179 sensor with 75° lens, microphone, housing and tripod. ArduCAM UB019701
zł437.92
24h
Available quantity: 1
Available
A comprehensive machine vision solution. It has an integrated 12 MP camera module and communicates via an embedded 2.1 Gbps MIPI interface directly with Myriad X, which takes data and performs neural inference on it, returning the results via USB. SparkFun SEN-17769
zł1,099.01
3 weeks
No product available!
Camera with OV4689 CMOS sensor with a resolution of 2688x1520 px. It communicates via a parallel interface. ArduCAM U6035
zł89.00
24h
Available quantity: 1
Available
The camera set with the Sony IMX477 sensor allows you to remotely control zoom. Works with all versions of the Raspberry Pi. The camera is equipped with a matrix with a resolution of 12 MPx. ArduCAM B016712MP