- New
PCIe TO 2-CH SATA HAT+ - PCIe SATA adapter for Raspberry Pi 5
ID: 1199754
zł77.53
Tax included
zł63.03 tax excl.
This adapter allows you to connect two SATA 3.0 drives to the Raspberry Pi 5 via a 16-pin PCIe interface. The device operates as a HAT+ and is automatically detected by the Raspberry Pi OS without the need for driver installation. It supports 2.5" and 3.5" drives, offers speeds of up to 6 Gb/s, and is fully compliant with AHCI 1.2 and NCQ. Ideal for building NAS servers, data storage systems, and IoT projects. Waveshare PCIe TO 2-CH SATA HAT+
Description
PCIe TO 2-CH SATA HAT+ is an expansion card that allows you to connect two SATA hard drives to a Raspberry Pi 5 without the need to install drivers. The device is fully compliant with the HAT+ standard, ensuring automatic hardware detection and configuration by the Raspberry Pi OS system. The adapter connects to the Raspberry Pi 5 via a 16-pin PCIe interface, offering two SATA 3.0 (6 Gb/s) ports compatible with PCIe Gen2 and SATA Gen3 standards.
The module supports both 2.5” and 3.5” drives, with power supply options for 5V and 12V, making it ideal for server, NAS, data storage, and IoT applications. Thanks to the built-in EEPROM chip, the adapter stores HAT+ identification data and product information, allowing for automatic configuration loading. The board also features two LED indicators that signal operational status, making it easy to monitor drive activity. The device supports Native Command Queuing (NCQ) and the AHCI 1.2 specification, ensuring high data transfer performance and low latency. It supports power-saving modes L0s / L1 and SATA partial/sleep power management features. The adapter does not require additional power if the connected drives do not use a 12V supply. When used with the latest version of Raspberry Pi OS, the module operates in plug-and-play mode without driver installation. The entire design follows the new HAT+ standard, ensuring perfect fit and full compatibility with Raspberry Pi 5 boards.
Features
- Standard: HAT+ (compatible with Raspberry Pi 5)
- Connector: 16-pin PCIe Gen2
- Interface: PCIe to 2× SATA 3.0 (6 Gb/s)
- Compatibility: SATA Gen3 / PCIe Gen2
- Supported drives: 2.5" and 3.5" (SATA 5V/12V)
- Communication: AHCI SPEC 1.2, NCQ (Full-Speed Command Queue)
- Power-saving modes: L0s / L1, SATA partial/sleep
- EEPROM: stores HAT ID and product information
- LED indicators: 2 pcs, indicating SATA channel activity
- Power supply: via 40-pin GPIO of Raspberry Pi or external (DC 3.5 × 1.3 mm)
- Single channel speed: up to 6 Gb/s (limited to 5 Gb/s by Pi 5)
- System support: Raspberry Pi OS (latest version – no drivers required)
- Plug & Play function – no configuration needed
- Dimensions: 85 × 56.5 mm
Kit contains
- PCIe TO 2-CH SATA HAT+
- 2 x SATA Adapter Cable
- 16PIN PCIe cable
- Screws pack
1199754
Data sheet
- Compatible with
- Raspberry Pi 5
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
GOODRAM CX400 gen. 2 SSD with a capacity of 128 GB. It is equipped with a SATA III interface, has a 2.5" format. Goodram SSDPR-CX400-128-G2
zł96.86
Delivery date unknown
No product available!
GOODRAM CX400 gen. 2 SSD with a capacity of 256 GB. It is equipped with a SATA III interface, has a 2.5" format. Goodram SSDPR-CX400-256-G2
zł97.54
Delivery date unknown
No product available!
GOODRAM CX400 gen. 2 SSD with a capacity of 512 GB. It is equipped with a SATA III interface, has a 2.5" format. Goodram SSDPR-CX400-512-G2
zł147.00
24h
Available quantity: 1
Available
Other products in the same category (16)
The PCIE TO M.2 E KEY HAT+ Acce A kit enables the expansion of Raspberry Pi 5 with a fast and modern network interface based on the Intel Wireless-AX210 module, supporting Wi-Fi 6E and Bluetooth 5.3. Thanks to the HAT+ standard, two SMA antenna connectors, and the ability to transmit Bluetooth signals via USB, the adapter is suitable for communication projects, home servers, and IoT systems requiring high-performance wireless connectivity.
zł114.41
4 weeks
No product available!
Module with RS232 and RS485 interface dedicated to Raspberry Pi minicomputer. Communication takes place via the SPI interface. Waveshare RS485 RS232 HAT
zł84.85
4 weeks
No product available!
Expansion board with GSM/GPRS module designed for Arduino and Raspberry Pi. It uses the Quectel M95 chip, the board has two audio connectors, a microSD slot and a dual SIM slot. A-GSM II Shield
zł204.67
6 weeks
No product available!
KAmodRPi-GPRS-GPS is an overlay for Raspberry Pi 4 / 3B + / 3B / 2B / B + computers, which allows you to enrich the system with the ability to send data via GPRS, SMS transmission or work as a module for Bluetooth communication. This extension also offers the ability to receive satellite data from location systems - GPS and GLONASS.
zł229.00
24h
Available quantity: 47
Available
The set with the RM500U-CNV module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks. Waveshare RM500U-CN 5G HAT
zł938.97
4 weeks
No product available!
Expansion board with LoRa E22-400T22S module for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. SB Components 22564
zł167.69
24h
Available quantity: 2
Available
The KAmod RPI 485&CAN Hat module extends the functionality of Raspberry Pi 5 boards (and others with a 3.3 V SPI interface) with two galvanically isolated RS485 interfaces and one CAN 2.0B interface. The RS485 interfaces are based on the SC16IS752 controller, and the CAN interface on the MCP2515 system. The isolated transceivers used (ADM2483 and TJA1052) increase resistance to interference. Communication takes place via two SPI interfaces, and additional power supply options (from RPi or external 8-32 V) and a stabilized 5 V output allow for flexibility in power supply. The module can be mounted on RPi 5, also with an Active Cooler radiator, and can work with other microcontrollers. The maximum transmission speeds are 500 kbps for RS485 and 1 Mbps for CAN
zł102.78
24h
Available quantity: 4
Available
Expansion board with LoRa E22-400T22S module for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. Waveshare SX1268 433M LoRa HAT
zł95.96
4 weeks
No product available!
PoE M.2 HAT+ (B) is a practical add-on board for Raspberry Pi 5 that enables simultaneous power over Ethernet and installation of a high-performance NVMe SSD. With boot support from the SSD and additional power output terminals, this module is ideal for projects requiring fast storage and reliable power supply, such as servers, surveillance systems, or IoT gateways.
zł94.69
4 weeks
No product available!
The Quectel 5G RM520N-GL module kit is designed for use with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare RM520N-GL 5G HAT (with case) (EU)
zł1,217.01
24h
Available quantity: 1
Available
PCIe TO M.2 USB ETH HAT+ Add-on Board – Expansion for Raspberry Pi 5 providing USB 3.2 ports, 2.5G Ethernet, and an M.2 slot for high-speed NVMe drives. Enables significant operational and communication performance upgrades for embedded systems and Raspberry Pi-based servers.
zł188.26
4 weeks
No product available!
Raspberry Pi M.2 HAT+ in compact version enables expansion of the Raspberry Pi 5 with high-speed NVMe drives and other PCIe accessories in M.2 format. The standard version supports 2230 and 2242 formats, while the Compact version supports 2230 format with the option of installation in a dedicated case. The module increases the capabilities of the Raspberry Pi 5 in applications requiring high bandwidth and hardware flexibility. Raspberry SC1771
zł68.90
24h
Available quantity: 196
Available
The PCIe To M.2 MINI adapter allows the Raspberry Pi 5 to be expanded with a high-speed NVMe SSD, offering high bandwidth and the ability to boot the system directly from the drive. Its compact form makes the module ideal for projects that require high computing power and fast data access within limited mounting space. It is well-suited for file systems, servers, terminals, and embedded projects using the Raspberry Pi 5.
zł23.20
24h
Available quantity: 1
Available
PCIE TO 4-CH NVME Board (B) NP is a PCIe expansion board for Raspberry Pi 5, allowing connection of up to four NVMe drives, improving system performance and enabling SSD boot. With power supply via Pi5 or an external source and support for multiple M.2 formats, it is ideal for expanding storage in projects requiring high speed and reliability. Version without power adapter and power cable, intended for users with their own power infrastructure.
zł118.01
4 weeks
No product available!
SIM7600E-H 4G HAT is an expansion module for Raspberry Pi for communication via GSM / GPRS cellular networks based on Simcom SIM7600E-H chipset. Waveshare SIM7600E 4G HAT
zł294.19
24h
Available quantity: 11
Available
Set with the SIMCom 4G module SIM7600G-H designed to work with the Raspberry Pi minicomputer. It supports 4G, 3G, 2G networks and GNSS positioning. Waveshare SIM7600G-H-M2 4G HAT
zł369.14
24h
Available quantity: 1
Available
This adapter allows you to connect two SATA 3.0 drives to the Raspberry Pi 5 via a 16-pin PCIe interface. The device operates as a HAT+ and is automatically detected by the Raspberry Pi OS without the need for driver installation. It supports 2.5" and 3.5" drives, offers speeds of up to 6 Gb/s, and is fully compliant with AHCI 1.2 and NCQ. Ideal for building NAS servers, data storage systems, and IoT projects. Waveshare PCIe TO 2-CH SATA HAT+