USB - RS232/RS485 converter with FT232RL chip

USB-UART converter with four isolated UART ports with built-in isolation of 1.5kV/3kV. It guarantees data transmission speeds of up to 12 Mbps and the ability to work with 1.8 V or 3.3 V voltage systems on the UART side. It is equipped with a USB Type C connector and is capable of operating in a wide temperature range from -40°C to +55°C. Electronic Prototypes EPED001A-10-STD

The FT232RNL USB to UART converter provides stable serial communication and debugging of industrial equipment, supporting 3.3V and 5V voltages and hardware flow control. With power indicators, protection diodes, and compatibility with multiple operating systems, it offers reliable data transfers from 300 bps to 3 Mbps, as well as additional protections against faults and electrostatic discharge. Waveshare USB TO TTL (C)

The DS1100 is a programmable RS232 controller with Ethernet, ideal for serial-over-IP applications, featuring three LEDs, PoE capability, and a comprehensive set of mounting accessories. Tibbo Technology DS1100

Isolated USB - RS232/RS485 converter designed for industrial applications. It offers 4 channels for serial communication, including two RS232 and two RS232/RS485 channels. Provides easy communication between the USB interface and major serial communication standards. Waveshare USB TO 4CH RS232/485

Isolated USB to RS232 converter designed for industrial applications. It offers 4 channels for serial communication compliant with the RS232 standard. It provides easy communication between the USB interface and the industrial serial communication standard. Waveshare USB TO 4CH RS232

USB-UART converter for Odroid minicomputers. It is based on the CP2102N chip and is equipped with a USB type C connector

USB port isolator based on the ADUM3160 chip. The device has a rated insulation voltage of 1500V. The isolator is powered from the USB port.

Isolated USB to RS232 converter designed for industrial applications. It offers 4 channels for serial communication compliant with the RS232 standard. It provides easy communication between the USB interface and the industrial serial communication standard. Waveshare USB TO 4CH RS232 (F)

Cable with USB-UART converter dedicated to TFmini and TFmini Plus distance sensors. Ended with a USB type A plug and goldpin connectors. Benewake USB-Dupon

UART - USB converter based on the FT232RL chip with TX, RX, RTS and CTS lines led out to the pin connector, the remaining lines available on solder fields for pin connectors. Micro-USB socket. Voltage supply from 3.3 to 5 V. FT232 USB UART Board (micro)

Isolated USB - RS232/485/422 TTL converter dedicated to industrial applications. It provides easy communication between USB interface and industrial serial communication standards. EVC8014

Uniwersalny konwerter USB z możliwością komunikacji przez najczęściej używane interfejsy UART, I2C, SPI i JTAG. Na płytce znajduje się obwód konwersji poziomów napięcia 3,3V i 5V, co zapewnia lepszą kompatybilność z różnymi urządzeniami. Waveshare USB TO UART/I2C/SPI/JTAG

USB - UART converter based on the PL2303 chip. Compatible with voltages of 1.8 V, 2.5 V, 3.3 V and 5 V, it is equipped with a USB type C connector. Waveshare PL2303 USB UART Board (Type C)

USB-UART converter based on the CP2102N chip. Compatible with a voltage of 3.3 V, it has been equipped with a USB type C connector. Adafruit 5335

USB - UART TTL converter based on the FT232RL chip, the module is equipped with a miniUSB socket. Works with 3.3V or 5V voltage levels.