Jrk G2 21v3 - DC motor controller
ID: 572199
5906623478767
zł225.57
Tax included
zł183.39 tax excl.
DC motor driver with voltage 4.5..28V and maximum continuous current of 2.6A. It has the ability to easily implement the feedback loop and numerous control interfaces. Polol 3142
Description
Jrk G2 21v3 USB Motor Controller is a single-channel DC motor driver. The voltage supplying the motors ranges from 4.5 to 28 V. The controller has one channel with a capacity of 2.6 A at constant power consumption. The control can be carried out via the USB port, TTL serial interface, I2C, RC receiver signal or via analog input. The controller enables easy implementation of a closed loop of engine speed control by connecting an analog or frequency input. It also allows configuration of engine operation parameters via a USB interface and a free application.
properties
- Operating voltage: 4.5 ... 28 V
- Continuous output current: 2.6 A
- Simple bi-directional DC motor control
- Automatic protection by reverse polarity
- Five control interfaces
- USB interface - Virtual COM port (microUSB connector)
- Serial TTL (UART) interface
- I2C interface
- Signal from RC apparatus (PWM 50 Hz, 5-10% filling)
- Analogue signal input
- Feedback
- Analog signal (0 - 5 V)
- Frequency for closed loop speed control using pulse counting (in the case of high frequency feedback) or pulse clocking (in the case of low frequency feedback)
- Configuration via USB interface
- PID coefficients (tuning parameters)
- Maximum current
- Maximum working cycle
- Maximum acceleration and delay
- Error response
- Input calibration (learning) for analog and RC control
- Dimensions: 30.5 x 25.5 x 7.5 mm
- Weight: 4.5 g
Included
- Driver Jrk G2 21v3 USB Motor Controller
- 2 x 2-pin screw connector
- Simple male goldpin connector
572199
Data sheet
- Output current
- 2,6 V
- Number of channels
- 1
- Supply voltage min
- 4,5 V
- Supply voltages max
- 28 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
This powerful motor controller makes closed-loop speed or position (but not both!) control of a brushed DC motor easy, with quick configuration over USB using our free software. It supports five control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), and hobby radio control (RC).
zł450.07
24h
Available quantity: 1
Available
DC motor driver with voltage 6.5..40V and maximum continuous current 21A. It has the ability to easily implement the feedback loop and numerous control interfaces. Polol 3149
zł598.54
Delivery date unknown
No product available!
DC motor driver with voltage 4.5..28V and maximum continuous current of 2.6A. It has the ability to easily implement the feedback loop and numerous control interfaces. Polol 3143
zł232.62
Delivery date unknown
No product available!
Other products in the same category (16)
TB6612FNG dual DC motor controller module. It can be used as a stepper motor driver or solenoid driver. Adafruit 2448
zł33.91
24h
Available quantity: 2
Available
Pololu G2 24v12 High Power is a miniature DC motor controller. Driver\'s power supply: 6.5 ... 30V. Current capacity of the module: 12A. The module has protection against back voltage and overvoltage. Pololu 1364
zł592.18
24h
Available quantity: 1
Available
Module with a 2-channel driver for DC motors TB6612FNG designed to work with the Raspberry Pi. It can work with voltages from 6 to 12 V and currents up to 3 A. SB Components 21468
zł91.17
24h
Available quantity: 2
Available
Pololu Simple Motor Controller 18v7
zł746.97
4 weeks
No product available!
The RoboClaw Solo motor controllers from Basicmicro (formerly Ion Motion Control) can control a single brushed DC motor using USB serial, TTL serial, RC, or analog inputs. An integrated quadrature decoder make it easy to create a closed-loop speed control system.
zł498.17
24h
Available quantity: 1
Available
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3″ × 0.8″ board supports a wide 6.5 V to 30 V voltage range and is efficient enough to deliver a continuous 25 A without a heat sink.
zł286.68
4 weeks
No product available!
The expansion module is designed to work with micro:bit. It allows you to control 4 DC motors or two stepper motors and 8 servos. It communicates via the I2C interface. DFRobot DFR0548
zł84.92
24h
Available quantity: 2
Available
Motoron M3T453 Triple I²C Motor Controller - 3-channel DC motor controller 4.5-44V 0.8A (soldered...
This controller allows independent control of three DC motors using a single I²C bus. It supports motor supply voltages ranging from 4.5 to 44 V and currents up to 0.8 A continuous per channel, making it suitable for a wide range of robotic and mobile applications. I²C communication eliminates the need to generate PWM signals and significantly saves microcontroller pins. The ability to connect multiple controllers on a single bus allows for easy scaling of the system to larger motor counts. Pololu 5084
zł75.20
6 weeks
No product available!
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with connectors for assembly. Pololu 5055
zł605.06
4 weeks
No product available!
DC motor driver based on the Texas Instruments DRV8263H-Q1. It can control one DC motor in two directions or two motors in one direction from a supply voltage of 4.5-65V and a continuous current of up to 3.5A (limited to 10A). The module offers three control modes: Phase/Enable (PH/EN), PWM (IN/IN), and independent half-bridges. Built-in current sensors and protection features protect against overload, overheating, and reverse power connection. The 3-5V logic control is decoupled from the motor supply, increasing safety and integration flexibility. Pololu 5238
zł56.40
6 weeks
No product available!
Single-channel DC motor driver with an operating voltage from 8 to 28 V and a continuous current up to 160 A. It can be controlled by an analog signal, PWM, UART, RC or by means of built-in buttons. Cytron MDS160A
zł1,162.14
4 weeks
No product available!
The module with the DRV8830 DC motor controller with a maximum current of 1 A. The board is equipped with a screw connector and communicates via the I2C interface. Pimoroni PIM479
Regular pricezł60.70zł48.56
24h
Available quantity: 12
Available
HAT module with a driver for two DC motors designed for Raspberry Pi. Motors can be powered with the voltage from 6.5 to 30 V and draw a maximum current of up to 18 A. Pololu 3751
zł331.50
4 weeks
No product available!
Pololu High-Power Motor Driver 18v25 CS
zł662.85
24h
Available quantity: 1
Available
HAT with two-channel DC motor driver for Raspberry Pi. It has an operating voltage from 6 to 24 V and a continuous current of up to 10 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron HAT-MDD10
zł117.32
24h
Available quantity: 1
Available
Module with TB6612FNG DC motors dual driver. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 108020103
zł59.56
24h
Available quantity: 1
Available
DC motor driver with voltage 4.5..28V and maximum continuous current of 2.6A. It has the ability to easily implement the feedback loop and numerous control interfaces. Polol 3142