zł5.15
e-Paper E-Ink 7.3" 7-color HAT module 800x480 for Raspberry Pi (F) - Waveshare 23434
ID: 1182964
5906623427079
zł331.90
Tax included
zł269.84 tax excl.
ACeP e-Paper 7-color display module with 7.3" diagonal and 800x480 px resolution. It communicates via SPI interface. Waveshare 7.3inch e-Paper HAT (F)
Description
A 7.3" 7-color e-Paper display module with 800x480 px resolution. It has the ability to display content with two-level gray scale and supports ACeP (Advanced Color ePaper) technology. The built-in controller implements communication via SPI interface. The e-Paper displays feature high contrast of the displayed image and draw current only when the displayed content changes. The module has a built-in voltage level converter, making it compatible with 3.3 V and 5 V systems. It is equipped with a 40-pin connector that allows the display to be connected to the Raspberry Pi. Support in the form of use cases with Raspberry Pi, Jetson Nano, Arduino and STM32 is available on the product page.
Features
- Diagonal: 7.3"
- Resolution: 800x480 px
- Display color: ACeP 7-Color
- Gray levels: 2
- Interface: 3-wire SPI, 4-wire SPI
- Pixel size: 0.2 × 0.2
- Full refresh time: 35 s
- Power consumption: 49.4 mW
- Viewing angle:> 170 °
- No backlight, displays last content after power off
- Low power consumption
- Built-in logic level converter, compatible with 3.3V/5V MCUs
- Operating voltage: 3.3 V/5 V
- Display size: 160 x 96 mm
- Module dimensions: 170.2 x 111.2 mm
Kit contains
- Display 7.3inch e-Paper HAT (F)
- Driver Board module with FFC tape
- PH2.0 20cm 8-pin cable
- Screw set
1182964
Data sheet
- Screen type
- E-Ink/Epaper
- Diagonal (inch)
- 7,3
- Resolution
- 800 x 480 px
- Interface
- SPI
- Touch
- No
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
24h
Available quantity: 115
Available
STM32 Nucleo-64 development board with STM32L476RGT6 MCU, supports Arduino and ST morpho connectivity
zł84.89
24h
Available quantity: 26
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł264.91
24h
Available quantity: 9
Available
The 7-color ACeP e-Paper display has a diagonal of 7.3" and a resolution of 800x480 px. Communicates via SPI interface. No PCB. Waveshare 7.3inch e-Paper (F)
zł298.71
24h
Available quantity: 3
Available
Other products in the same category (16)
2.8" TFT LCD display with touch screen. The display is equipped with an SPI interface for image display and touch screen operation. It has a resolution of 320x240 pixels. Waveshare 2.8inch RPi LCD (A)
zł75.29
24h
Available quantity: 4
Available
320×240, 3.2 inch Resistive Touch Screen TFT LCD, Designed for Raspberry Pi
zł112.85
24h
Available quantity: 2
Available
E-ink display for Raspberry Pi with 2.13 "diagonal resolution and 250x122 pixels with SPI controller. DFRobot DFR0591
zł114.33
24h
Available quantity: 1
Available
IPS LCD 7 "touch screen display for Raspberry Pi. The display is equipped with HDMI interface for image display and USB for touch screen. Resolution 1024x600 pixels. Waveshare 7inch HDMI LCD (C)
zł185.19
24h
Available quantity: 21
Available
Touch (resistive, USB) TFT LCD display with a size of 7 inches with a resolution of 800x480 pixels with HDMI interface. Adafruit 2407
zł594.78
4 weeks
No product available!
Adafruit 2455 - PiTFT 2.4" HAT Mini Kit - 320x240 TFT Touchscreen
zł228.60
4 weeks
No product available!
RPI-HMI-101D-ACCE (EU) is a ready-made HMI solution for industrial and commercial applications, enabling easy integration with Raspberry Pi 4 or 5. Equipped with a high-quality IPS display with 10-point touch support, a durable aluminum enclosure, and a rich set of interfaces, it is ideal for projects requiring stability, precise control, and reliability in long-term use.
zł568.65
4 weeks
No product available!
A 7-inch display with a resolution of 1024 x 600 pixels dedicated to the Raspberry Pi Zero. It features a mini HDMI port and a 5-point capacitive touch panel. Waveshare Zero-DISP-7A
zł252.41
24h
Available quantity: 4
Available
Module with a 2.13" black and white e-Paper display. Equipped with an SPI interface for image display and I2C interface for a touch panel. Waveshare 2.13inch Touch e-Paper HAT (with case)
zł102.18
24h
Available quantity: 10
Available
Module with a round 1.28" IPS LCD display and a resolution of 240x240 px. Communication is via the SPI interface. SB Components 21451
zł146.53
24h
Available quantity: 3
Available
Module with a black and white OLED display with a diagonal of 1.3". It has a resolution of 128x64 pixels and a SH1107 controller. Communication with the module is carried out via the I2C or SPI interface. WSH 1.3inch OLED Module (C)
zł32.73
24h
Available quantity: 4
Available
Raspberry Pi Touch Display 2 is a robust and multi-functional 7" touchscreen with a resolution of 720 x 1280, designed for integration with Raspberry Pi computers. With five-point touch support, a high-quality TFT display and an anti-glare coating, it is an excellent solution for interactive projects, entertainment systems and information panels
zł279.00
24h
Available quantity: 61
Available
Module with e-Paper display, 5.83" diagonal and 600x448 px resolution. Communication via SPI interface. Waveshare 5.83inch e-Paper HAT (C)
zł316.17
24h
Available quantity: 1
Available
The 5-inch IPS LCD display has a resolution of 800 x 480 pixels. It has a thin and lightweight design and communicates via the DSI interface. Waveshare 50H-800480-IPS
zł132.75
24h
Available quantity: 3
Available
1.3inch OLED display HAT for Raspberry Pi, 128x64 pixels, SPI/I2C interface
zł41.55
24h
Available quantity: 1
Available
A capacitive touch panel screen dedicated to the Raspberry Pi CM4. It can be used not only as a simple mirror, but also as a convenient computer for browsing the Internet or playing multimedia files. It comes with a CM4 module with 2GB of RAM. Waveshare 13.3inch Magic Mirror C4C (EU)
zł1,715.99
4 weeks
No product available!
ACeP e-Paper 7-color display module with 7.3" diagonal and 800x480 px resolution. It communicates via SPI interface. Waveshare 7.3inch e-Paper HAT (F)