Ultrasonic distance sensor with a range of 30 to 500 cm and a resolution of 1 cm. It is powered by a voltage from 5 to 12 V. It allows measuring the distance to objects with a detection angle of 20° and a measurement frequency of 10 Hz. It uses RS485 interface and Modbus RTU protocol for communication and can be used with all kinds of industrial. The URM15 is equipped with a temperature compensation function and allows to reduce the influence of ambient temperature on the measurement. The sensor uses a 75 kHz acoustic wave and an ultrasonic transducer with a diameter of 40 mm. It is characterized by a relatively small measurement angle and high sensitivity. The measurement circuitry is enclosed in an IP65-rated housing, so it can be used in harsh weather conditions. Sample programs are available on the product wiki page.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
No product available!
URM04 v2.0 Ultrasonic Sensor
DFRobot SEN0153
No product available!
Ultrasonic distance sensor with a range of up to 5m. Communication takes place via the I2C interface. The module is supplied with the voltage from 3.3 to 5.5 V. DFRobot SEN0304
Ultrasonic distance sensor with a range of up to 15m. Powered with the voltage from 9 to 24 V, it communicates via the RS485 interface. DFRobot SEN0310
No product available!
No product available!
Module with a digital distance sensor with a range of up to 50 cm. It has a digital output that goes low when an object is detected. Pololu 4067
ToF (Time of Flight) laser distance sensor with built-in MCU and distance measurement algorithm. The sensor can measure up to 5m with an accuracy of ±1.5 cm and a resolution of 1 mm. Waveshare TOF Laser Range Sensor
ToF distance sensor module based on the VL53L1X system. It offers a range from 4 to 400 cm and communicates via the I2C, UART or Modbus interface. TOF400F
This sensor is a carrier/breakout board for ST’s VL53L0X laser-ranging sensor, which measures the range to a target object up to 2 m away.
This module features a fixed-gain, 38 kHz modulated IR sensor and a corresponding IR LED with oscillator circuit to make a tiny proximity sensor. This low-brightness version draws an average of 8 mA at 5 V and has a typical sensing range up to approximately 12 inches (30 cm).
Ultrasonic distance sensor (sonar) with a measuring range from 50 cm to 5 m. It allows you to read data via an industrial analog interface with a current output of 4-20 mA. DFRobot SEN0267
No product available!
No product available!
Laser rangefinder with measuring range up to 22m. The current consumption is up to 200mA and the supply voltage 4.5 ... 6V. Communication via UART or CAN interface. DFRobot SEN0238
Pololu Carrier with Sharp GP2Y0D810Z0F Digital Distance Sensor 10cm
ToF VL53L0X distance sensor module with a range of 3 to 200 cm. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020532
Laser distance sensor with a measuring range from 0.1 m to 40 m. It has a high accuracy of ± 5 cm and a resolution of 1 cm. Benewake TF02-Pro
Ultrasonic distance sensor MB1200 with a range from 0 to 765 cm. It generates an output in the form of a pulse, the duration of which is proportional to the measured distance. Pololu 1650
A miniature lidar proximity sensor that detects objects ranging from less than 1 mm to 50 cm by generating a PWM signal proportional to distance. It operates in a 3-5.5 V range, draws 30 mA, features an ENABLE pin for sleep mode, and holes for a 2.54 mm connector and an indicator LED. Its color, transparency, and light-sensitive properties make it ideal for robotics, automation, and contactless interfaces. Pololu 5562
No product available!
Ultrasonic distance sensor with a range of 30 to 500 cm. Powered from 5 to 12 V, it communicates via RS485 interface. DFRobot SEN0519