2.13" 250x122 Tri-Color eInk/ePaper Display - module with 3-colour e-Paper display 2.13" 250x122
ID: 1184877
5906623431670
zł121.44
Tax included
zł98.73 tax excl.
The ePaper display module has a diagonal of 2.13" and a resolution of 250x122 pixels. It uses the SSD1680 controller and communicates via an SPI interface. Adafruit 4947
Description
The ePaper display module has a diagonal of 2.13" and a resolution of 250x122 pixels. It uses the SSD1680 driver and communicates via an SPI interface, making it easy to use. The full refresh time is approximately 15 seconds and the viewing angle is over 170 degrees. It allows content to be displayed in three colours: red, black and white.
ePaper displays have several significant advantages over traditional LCD displays. They require very little energy to operate as they do not need a continuous backlight and their matrix uses backlight-free technology, which does not tire the eyes. in addition, ePaper displays provide a very clear and sharp image that is readable even in strong sunlight.
The module has a built-in Micro SD card slot and SRAM with SPI interface. All components on the board are connected to a single bus, so it uses a relatively small number of leads. It is powered by 3.3 V. The ePaper display module is a great solution for projects where it is important to save power and display information on the screen with minimal power consumption without the need for frequent refreshes. Full documentation and sample programmes are available on the product page.
Features
- Diagonal: 2.13"
- Resolution: 250 x 122 px
- Display colour: red, black, white
- Interface: SPI
- SSD1680 controller
- Full refresh time: 15 s
- Viewing angle: > 170 °.
- No backlight, displays last content after power-off
- Low power consumption
- SRAM with SPI interface
- Micro SD card slot
- 18-pin EYESPI connector
- Power supply voltage: 3,3 V
Kit contains
- 2.13" module 250x122 Tri-Color eInk/ePaper Display
- 16-pin goldpin male connector
1184877
Data sheet
- Screen type
- E-Ink/Epaper
- Diagonal (inch)
- 2,13
- Resolution
- 250 x 122 px
- Interface
- SPI
- Touch
- No
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 8 MB of QSPI flash memory. The circuit can be programmed in C/C++, CircuitPython or MicroPython. Adafruit 4900
zł52.08
Delivery date unknown
No product available!
Board with the WiFi Espressif ESP32-S2 module. It offers 4 MB of Flash memory and 2 MB of SRAM and an RGB LED. It is equipped with a STEMMA QT connector. Adafruit 5325
zł74.27
24h
Available quantity: 4
Available
Tile with WiFi module and Bluetooth Classic + BLE ESP32 Pico. It offers 8 MB of Flash memory and 2 MB of PSRAM and an RGB LED. It is equipped with a STEMMA QT connector. Adafruit 5395
zł79.43
Delivery date unknown
No product available!
Board with the WiFi Espressif ESP32-S3 module. It offers 8 MB of Flash memory and 512 KB of SRAM and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5426
zł69.40
Delivery date unknown
No product available!
Other products in the same category (16)
Black and white e-Paper display with a diagonal of 3.52" and a resolution of 360x240 px. Communicates via the SPI interface. Without a PCB. Waveshare 3.52inch e-Paper
zł66.40
24h
Available quantity: 1
Available
This energy-efficient black-and-white e-Paper display with a resolution of 1360 x 480 pixels provides a clear image even in direct sunlight. With a wide viewing angle of over 170° and zero power consumption in idle mode, it\'s ideal for applications requiring constant information display. It supports the SPI interface and is compatible with Raspberry Pi, Arduino, STM32, and ESP32. Waveshare 10.85-inch e-Paper
zł365.05
6 weeks
No product available!
7.5inch e-Paper HAT (H) is a four-color e-paper display with a resolution of 800×480, designed for applications requiring low power consumption and readability without backlight. Communication via SPI and compatibility with popular development platforms enable quick deployment in information systems and industrial signage.
zł253.49
24h
Available quantity: 2
Available
7-color display ACeP e-Paper with a diagonal of 4.01" and a resolution of 640x400 px. Communicates via the SPI interface. Without a PCB. Waveshare 4.01inch e-Paper (F)
zł228.15
24h
Available quantity: 1
Available
Kit with 4.2" e-Paper display with passive power supply via NFC, NFC module and microSD card. Waveshare 4.2inch NFC e-Paper Eval Kit
zł335.59
24h
Available quantity: 1
Available
Module with black and white e-Paper display, diagonal 7.5" and resolution 800x480 px. Communication via SPI interface. Waveshare Pico-ePaper-7.5
zł264.67
4 weeks
No product available!
Waveshare 7.3" (E) is a full-color e-paper display designed for integration with custom systems via the SPI interface. Thanks to E Ink Spectra 6 technology, the display is suitable for use in shelf labels, asset tags, information boards, and other projects where low power consumption, good readability, and print-like image aesthetics are essential. It works with popular hardware platforms such as Raspberry Pi, Arduino, Jetson Nano, and STM32 via an optional HAT module.
zł322.75
4 weeks
No product available!
The 5.79-inch E-Paper (B) raw display is an energy-efficient and versatile solution, ideal for applications requiring long-term content display without the need for constant power. With the ability to display in three colors and a wide viewing angle, this e-ink module performs excellently in various lighting conditions, offering readability comparable to traditional paper. Waveshare 26844
zł91.83
24h
Available quantity: 3
Available
Inky pHAT (ePaper/eInk/EPD) - module with ePaper 2,13" display for Raspberry Pi (yellow/black/white)
Module with a 3-color (yellow, black, white) e-Paper display with a diagonal of 2.13" and a resolution of 250x122 px. SPI interface. Pimoroni PIM367
zł147.00
4 weeks
No product available!
Black and white e-Paper display with a diagonal of 10.3" and a resolution of 1872x1404 px. Parallel interface. Without PCB. Waveshare 10.3inch e-Paper
zł908.93
4 weeks
No product available!
Waveshare 5.79" (G) is a four-color e-paper panel ideal for applications such as electronic labels, information plates, conference badges, or warehouse tags. With low power consumption, high readability, and compatibility with popular microcontrollers, it is an attractive choice for energy-efficient and industrial applications.
zł84.61
4 weeks
No product available!
Module with a 3-color (red, black, white) e-Paper display with a diagonal of 2.13" and a resolution of 250x122 px. SPI interface. Pimoroni PIM299
zł147.00
4 weeks
No product available!
4-color e-Paper display with a diagonal of 7.3" and a resolution of 800x480 px. Communicates via the SPI interface. Without a PCB. Waveshare 7.3inch e-Paper (G)
zł281.84
24h
Available quantity: 3
Available
Module with a 2.13" black and white e-Paper display. Equipped with an SPI interface for image display and I2C interface for a touch panel. Waveshare 2.13inch Touch e-Paper HAT (with case)
zł105.90
24h
Available quantity: 2
Available
The 7.3", 7-colour ACeP e-Paper display has a resolution of 800x480 px. It has the ability to display images from a microSD card. Framed with a nice wooden border, it can be used as an electronic photo frame. Waveshare PhotoPainter
zł427.76
24h
Available quantity: 4
Available
4.2 "e-Paper display with passive power supply via NFC. The module requires no battery, data transfer and power supply during transfer is done thanks to NFC technology. Waveshare 4.2inch NFC-Powered e-Paper
zł199.00
24h
Available quantity: 2
Available
The ePaper display module has a diagonal of 2.13" and a resolution of 250x122 pixels. It uses the SSD1680 controller and communicates via an SPI interface. Adafruit 4947