Ideal Diode Reverse Voltage Protector - reverse voltage and current protection module 4-60V, 12A
ID: 1196551
zł12.05
Tax included
zł9.80 tax excl.
The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (5 mΩ), it supports currents up to 12 A continuous and 40 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5383
Description
The Pololu Reverse Voltage Protector is a compact solution designed to protect connected loads from reverse voltage polarity of up to -60 V. By utilizing an ideal diode controller LM74700-Q1 and a MOSFET transistor, the device operates within a voltage range of 4 V (3.2 V after startup) to 60 V. When the voltage is correctly connected, the module allows free current flow. However, in the case of incorrect polarity, it blocks the voltage and protects the circuit from damage.
The device features a very low power path impedance of approximately 5 mΩ, enabling continuous current flow of up to 12 A and peak currents of up to 40 A for several seconds. The protection mechanism operates in a bidirectional manner, meaning the module not only blocks reverse input voltage but also prevents current backflow from the load to the power source.
The module includes large mounting holes that allow the connection of wires or the use of 5 mm pitch screw terminals. Additionally, smaller holes with a 2.54 mm pitch enable the soldering of standard pin headers. The bottom of the board also features pads for optional transient voltage suppression (TVS) protection, enhancing system resistance against sudden voltage spikes.
Features
- Input voltage: 4 V to 60 V (3.2 V after startup)
- Reverse polarity protection up to -60 V
- Current handling: up to 12 A continuous, up to 40 A peak
- Power path impedance: approximately 5 mΩ
- Prevents current backflow from the load to the power source
- Supports wires and terminals with 5 mm or 3.5 mm pitch
- Soldering points for optional TVS protection
- Dimensions: 7.6 x 12.7 mm
1196551
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (1.5 mΩ), it supports currents up to 25 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5389
zł21.43
Delivery date unknown
No product available!
The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (3 mΩ), it supports currents up to 20 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5388
zł15.69
Delivery date unknown
No product available!
The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (10 mΩ), it supports currents up to 10 A continuous and 00 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5382
zł9.23
Delivery date unknown
No product available!
Other products in the same category (16)
USB - UART converter based on the PL2303 chip
zł8.83
24h
Available quantity: 19
Available
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 3.3 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 80% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
zł101.88
4 weeks
No product available!
80 W audio signal converter that reduces the speaker signal from the player to the level of RCA inputs. It allows you to connect to an external power amplifier. TSK TD-22
zł29.79
24h
Available quantity: 2
Available
HF32FA-G relay module for controlling devices with current consumption and voltage up to 10A/250VAC. Its compact design and high electrical performance make it ideal for use in home automation systems, DIY projects and IoT devices. Seeed Studio 114993555
zł21.98
24h
Available quantity: 8
Available
The stepper motor driver with the MP6500 system, allows the bipolar motor to be supplied with a current of up to 2A per phase, without the use of a heat sink. The system can be supplied with voltage in the range 4.5 ... 35V. Polol 2969
zł49.70
24h
Available quantity: 1
Available
Microphone preamplifier based on the NE5532 chip. Powered with DC voltage from 9 V to 24 V or AC in the range from 8 V to 16 V
zł14.15
4 weeks
No product available!
KAmod RS232S-ALL is a 3-5.5V RS232 to TTL converter supporting all RS232 signals, offering standard DB9 and Phoenix MC 3.81 connectors and 2.54mm goldpins, based on the MAX3238/SP3238 and providing ESD protection up to 15kV
zł44.14
24h
Available quantity: 188
Available
This small synchronous switching step-down (or buck) regulator takes an input voltage from 4 V to 36 V and efficiently reduces it to 3.3 V. The board measures only 0.7″ × 0.7″ yet delivers a typical continuous output current of up to 2.6 A and features reverse voltage protection.
zł82.07
24h
Available quantity: 3
Available
Black Edition offers adjustable current limiting, over-current and over-temperature protection, and five different microstep resolutions. It operates from 8 V to 35 V and can deliver up to 2 A per coil with sufficient additional cooling. Pololu 2128
zł56.88
24h
Available quantity: 2
Available
Three-way crossover with a crossover frequency of 1000 Hz and 5000 Hz. It works with speakers with an impedance of 5 to 8 Ω and offers power up to 180 W
zł29.99
4 weeks
No product available!
Power module based on a DC-DC Step-Down converter with a current efficiency of up to 12 A. The output voltage is adjustable in the range from 0 V to 50 V. The power supply offers power up to 600 W. WZ5012L
zł122.51
24h
Available quantity: 3
Available
Module with 8 SSR relays with a load of up to 3 A. The board is equipped with the ULN2003 system and communicates via a digital interface. Numato Lab SSRC80001-DC
zł638.27
3 weeks
No product available!
The TEA5767 module with an I²C interface and a frequency range of 76–108 MHz enables FM stereo signal reception in electronic projects. High sensitivity and compact design make it suitable for both mobile and stationary applications.
zł8.91
24h
Available quantity: 10
Available
The Step-Down converter module converts the input voltage of 7 - 26 V to a constant 5 V, with a maximum output current of 3 A, recommended up to 1.6 A for long-term operation. The conversion efficiency of the device is 96% and the module size is 22.3 x 17 x 4.2 mm
zł4.24
4 weeks
No product available!
Bluetooth audio receiver module enclosed in a housing that enables wireless transmission of sounds. It is equipped with a PCB antenna and a 3.5 mm audio jack
zł12.80
24h
Available quantity: 23
Available
A module with an active low-pass filter based on NE5532 systems. Dedicated to the bass column (subwoofer)
zł23.90
4 weeks
No product available!
The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (5 mΩ), it supports currents up to 12 A continuous and 40 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5383