ESP32-S3 development board with 1.8″ AMOLED touch display 368×448 - Waveshare 29958

ESP32-C6-Touch-LCD-1.47 is a development board with a touch IPS display and ESP32-C6 chip, providing Wi-Fi 6, Bluetooth 5, and a rich set of peripherals. The standard version without pre-soldered pin headers allows flexible integration into IoT, HMI, and mobile applications.

Development board with Espressif ESP32-S2 module. Thanks to the support of the 802.11 b/g/n standard, it enables wireless communication with WiFi networks. It offers 4 MB of Flash memory. It is programmed via the USB Type-C connector using Arduino, MicroPython, CircuitPython or ESP-IDF. WeMos S2 Mini V1psRAM

ESP32-S3-Touch-LCD-3.49 in the Case B version with a built-in 3.7 V lithium-polymer battery and compact dimensions of 98.50 × 28.99 × 22.80 mm constitutes an efficient and integrated solution for IoT projects, HMI user interfaces and applications with speech recognition.

Module with WiFi and BLE Espressif ESP32-S3 system and LCD TFT display. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5483

KAmod ESP32 ETH+POE is a board equipped with the ESP32-WROOM module, enabling communication via Wi-Fi 2.4 GHz and Ethernet with a typical RJ45 connector, integrated with a USB-UART converter and a PoE power supply system compliant with IEEE 802.3af/at. The design of the board with dimensions of 85x56 mm resembles the Raspberry Pi family, and on the 40-pin connector there are all important I/O ports and supply voltages of 5 V and 3.3 V for powering additional components

Development board based on a microcontroller with a RISC-V core. It offers support for WiFi 6, Bluetooth 5 and Zigbee 3.0 and Thread (IEEE 802.15.4) protocols. It uses the ESP32-C6-WROOM-1-N8 module and is compatible with ESP32-C6-DevKitC-1-N8. Waveshare ESP32-C6-DEV-KIT-N8

ESP32-S3-Touch-AMOLED-1.91 enables the development of advanced user interfaces and IoT applications with touch support. Thanks to the AMOLED display, motion sensor, PSRAM memory, and wireless connectivity, it performs well in mobile HMI panels, interactive systems, and smart devices. The connector-free design allows for easy integration in custom-mounted projects.

The IoT module combining Wi-Fi and Bluetooth (BLE) technologies, which is designed for a wide range of applications, from low-power sensor networks to the most demanding tasks such as voice coding, music streaming and MP3 decoding. Espressif ESP32-WROOM-32D 128MBit

The Espressif ESP32-S3-WROOM-1 WiFi and Bluetooth LE module board offers 8 MB Flash memory and 8 MB PSRAM. The pinouts are compatible with the ESP32-S3-DevKitC-1 modules.Waveshare ESP32-S3-DEV-KIT-N8R8

ESP32-S3-Touch-AMOLED-2.06 is a complete development platform for designing wearable devices with an AMOLED display, touch control, audio, wireless connectivity, and AI features. Thanks to its compact design and built-in battery, it is suitable as a foundation for smartwatches, data loggers, and IoT devices.

A small USB-UART TTL converter module based on the CH340 system with a USB type A connector. Designed for the ESP-01 and ESP-01S modules

ESP32-S3-DualEye-Touch-LCD-1.28 is a functional AIoT board with two touch displays, Wi-Fi, Bluetooth and voice support. Thanks to the combination of touch control, audio processing and graphic capabilities, it is perfectly suited for building modern user interfaces, robotics, wearable devices and smart home applications.

Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi, BLE and LoRa communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices using a rich set of GPIOs. Seeed Studio 114993071

Espressif ESP32-S3 WiFi module board with 32-bit dual-core Xtensa 32-bit LX7 processor. It offers 4 MB Flash memory and 512 kB SRAM and an RGB LED. It has a built-in ceramic WiFi/BLE antenna. Waveshare ESP32-S3-Zero

ESP32 module board equipped with a 1.28-inch round display. It offers Wi-Fi and Bluetooth 5.0 communication, has a built-in 6-axis QMI8658 IMU sensor and supports lithium battery charging. Ideal for developing IoT projects, mobile devices and wearable electronics. Version with a metal housing. Waveshare ESP32-S3-LCD-1.28-B

ESP32-C6-DEV-KIT-N16 is a versatile development board with support for Wi-Fi 6, Bluetooth 5, and Zigbee/Thread, based on the ESP32-C6 microcontroller with 16 MB of Flash memory. The version without soldered pin headers allows flexible integration in projects with non-standard mounting requirements, while still providing full functionality and a rich set of interfaces for IoT applications, automation, and embedded systems.