![ESP32 One Kit - development board with ESP32 module + OV2640 camera ESP32 One Kit - development board with ESP32 module + OV2640 camera](https://kamami.pl/41288-large_default/esp32-one-kit-development-board-with-esp32-module-ov2640-camera.jpg)
![ESP32 One Kit - development board with ESP32 module + OV2640 camera ESP32 One Kit - development board with ESP32 module + OV2640 camera](https://kamami.pl/41288-large_default/esp32-one-kit-development-board-with-esp32-module-ov2640-camera.jpg)
zł72.21 tax excl.
Development board with ESP32 module (WiFi + Bluetooth) in the set with the OV2640 camera. Equipped with a 40-pin connector compatible with Raspberry Pi HAT. Waveshare ESP32 One Kit
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
A small development board with the ESP32 module in the set with the camera. ESP32 is a system that combines WiFi and Bluetooth wireless communication technology. Equipped with 8 MB PSRAM, 4 MB Flash. The board has a microSD card connector, a USB-UART converter, signaling LEDs and a connector and circuit for charging Li-Ion batteries.
1. ESP32-D0WDQ6-V3 | 11. RT9193-33 |
2. Oscillator 40 MHz | 12. RT9166A-12PXL |
3. Reset | 13. ESP-PSRAM64H |
4. CP1202 USB-UART | 14. Flash |
5. LED | 15. 40-pin header |
6. Li-Ion Charger CS8501 | 16. microSD slot |
7. Oscillator 32,768 kHz | 17. IPEX antenna connector |
8. OV2640 | 18. microUSB |
9. MEMS Microphone | 19. Li-Ion connector |
10. RT9166A-28XL | 20. DVP Interface |
The user also has a 40-pin connector compatible with Raspberry Pi overlays, and the camera with the OV2640 sensor and the microphone are perfect for projects such as speech or image recognition. Full documentation is available on the product Wiki page.
Cable with USB typ A and microUSB typ B connectors, cable length 1 m. LANBERG CCP-MUSB2-AMBM-W-1M
Development board with ESP32 module (WiFi + Bluetooth). Equipped with a 40-pin connector compatible with Raspberry Pi HAT. Waveshare ESP32 One
Adafruit HUZZAH32 is a development board with a built-in WiFi ESP32 module. Processor frequency: 240 MHz, the module has a built-in system for charging Li-Pol batteries. The plate has soldered goldpin connectors (female extension). Adafruit 3619
Starter kit with 15 modules useful for learning (button, LED, display, sensors, etc.) and ESP32-S3-Pico-M board. Ideal for starting your electronics and programming adventure. Waveshare ESP32-S3-Pico-Sensor-Kit-B
Development board with Espressif ESP32-S3-WROOM-1 module. The module has built-in 8 MB Flash memory and 8 MB PSRAM and offers WiFi and Bluetooth LE wireless communication. Espressif Systems ESP32-S3-DevKitC-1-N8R8
Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi and BLE communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993069
Module with WiFi Espressif ESP32-S2. It integrates two 3.3 V stabilizers, SPI Flash memory, LiPo charging circuit, light sensor and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 4769
M5Stack series development kit equipped with ESP32-PICO-D4. It will work in IoT-related projects, as a STEM educational module or in Smart Home devices. M5Stack K051-B
Espressif ESP32 is an integrated circuit that combines Wi-Fi functionality and Bluetooth 4.0 BLE. Integrated 32-bit, dual-core Xtensa LX6 processor, 448kB ROM, 520kB SRAM. ESP32 allows you to work with many interfaces, including SPI, I2C, UART, CAN, ETH, IR and can be powered by 2.2V-3.6V. The system has a housing QFN48 (6x6mm). ESP32 Chip
Development board based on a microcontroller with a RISC-V core. It offers support for WiFi 6, Bluetooth 5 and Zigbee 3.0 and Thread (IEEE 802.15.4) protocols. It uses the ESP32-C6-WROOM-1-N8 module and is compatible with ESP32-C6-DevKitC-1-N8. Waveshare ESP32-C6-DEV-KIT-N8
Set with Adafruit HUZZAH32 (ESP32) board and expansion module with 8 BME688 sensors (gas, pressure, temperature and humidity sensor). Bosch BME688 Gas Sensor Developer Kit
No product available!
Compact development kit from the M5StickC series equipped with ESP32 Pico and display. Includes accessories for building a watch. M5Stack K016-H
Espressif ESP32-S2 WiFi chip module. It integrates a TFT LCD display, SPI Flash memory, LiPo charging circuit and RGB LED. It is equipped with a STEMMA QT connector. Adafruit 53
The ESP32 WiFi and Bluetooth module has a dual-core 32-bit MCU that integrates WiFi HT40 and Bluetooth / BLE 4.2 technology. Designed for mobile devices and Internet of Things (IoT) applications. DFRobot TEL0111
A small DIP adapter with a 2.54 mm goldpin connector. Designed for the ESP-01 and ESP-01S modules
No product available!
Development board with ESP32 module (WiFi + Bluetooth). Equipped with a 40-pin connector compatible with Raspberry Pi HAT. Waveshare ESP32 One
Integrated circuit, combining Wi-Fi functionality and Bluetooth 4.2 BLE. Integrated 32-bit dual-core Xtensa LX6 processor, 448kB ROM, 520kB SRAM. ESP32 allows you to work with many interfaces, including SPI, I2C, UART, CAN, ETH, IR and can be supplied with 2.2V-3.6V. The system has a QFN48 (5x5mm) housing. ESP32-D0WD
IoT development board equipped with ESP32 chip with WiFi and Bluetooth, has a USB-UART interface allowing programming via the USB port of the computer. DFRobot DFR0625
Development board with ESP32 module (WiFi + Bluetooth) in the set with the OV2640 camera. Equipped with a 40-pin connector compatible with Raspberry Pi HAT. Waveshare ESP32 One Kit