DE10-Pro-SX-280-16GB - Development kit with Intel Stratix 10 SX FPGA and 16GB RAM

The robust hardware design platform built around the Altera System-on-Chip (SoC) FPGA, which combines the latest dual-core Cortex-A9 embedded cores with industry-leading programmable logic for ultimate design flexibility. Users can now leverage the power of tremendous re-configurability paired with a high-performance, low-power processor system.

TerasIC INK is a comprehensive hardware platform for developing and testing industrial FPGA-based applications, offering full support for serial communication and industrial Ethernet. The kit enables rapid development of automation and data transmission solutions in environments requiring high reliability.

FPGA starter kit with Intel Stratix 10 SX chip. The module has integrated transceivers that transmit data at speeds up to 28.3 Gb/s, making DE10-Pro fully compatible with version 3.0 of the PCI Express standard. The DE10-Pro offers fast parallel Flash memory and four SO-DIMMs that have 8GB DDR4 SDRAM. Terasic P0629

The robot can recognize the attitude in real time using an acceleration and gyroscope sensor, as well as achieve balance by controlling the motors to adjust the position. Terasic P0582

The Terasic DE25-Nano development board with Agilex™ 5 FPGA and ARM Cortex-A76/A55 HPS system is a modern platform for AI applications, vision processing, and embedded systems. A rich set of interfaces and memory, active cooling, and compact dimensions allow it to be used both in prototyping and in final industrial solutions.

FPGA starter kit equipped with Cyclone V GT with 301K LE and supports PCIe Gen 2x4. The board has 1 GB DDR3 memory, 64 MB SDRAM memory, UART-USB interface and extensions such as GPIO and Arduino. Terasic P0559

The adapter is designed to connect boards with a PCIe connector to a computer. Can support PCIe Gen3 x4 interface. Terasic P0492

The TerasIC HDMI_RX P0083 module enables HDMI signal reception via the HSMC interface in FPGA systems. Thanks to compliance with HDMI and HDCP standards and the available reference design, it provides a complete solution for implementing, testing, and analyzing video transmission in embedded applications and image processing systems.

Cyclone V E FPGA Video Development System

Compact FPGA kit with Intel Arria 10 GX chip equipped with 8 GB DDR4-2133 memory and Thunderbolt 3 communication connector. Can be used directly on laptops or other portable devices. Academic version. Terasic FLIK P0642

The TerasIC HDMI_TX P0084 module enables HDMI transmission using the HSMC interface in FPGA projects. Compatibility with the latest HDMI standards and the provided source code accelerate the development and testing of vision and multimedia applications in FPGA-based systems.

Gigabit Ethernet transceiver with an FMC interface. Up to 1 Gbps network transfers with the host board using an FMC connector. NET-FMC can be connected any FMC(HPC) interfaces. Terasic P0481

Development platform based on Intel MAX 10 FPGA. The system provides the user with 50,000 logical elements and 1638 kbits M9K and 5888 kbits Flash. The board contains components such as built-in USB-Blaster II, QSPI Flash, ADC connector, WS2812B RGB LED and 2x6 TMD connector. Academic version. TerasiC T-Core P0633

The TerasIC P0057 kit enables testing, debugging, and signal simulation in systems using the HSMC interface. It is intended for design and diagnostic work with FPGA main boards and other systems equipped with an HSMC connector.

TerasIC SODIMM memory module with 18MB capacity and 550MHz operating frequency. The module is designed to work with Intel Stratix 10 FPGAs in evaluation kits such as TerasIC DE10-Pro-GX-280-4G and TerasIC DE10-Pro-GX-280-8G. TerasIC S0534