DE10-Pro-SX-280-32GB - Development kit with Intel Stratix 10 SX FPGA and 32GB RAM

TerasIC XSFP/SFP+HSMC (P0092) enables the development of 10G Ethernet systems based on the XAUI interface, featuring two SFP+ channels and a 156.25 MHz reference clock. Designed for integration with FPGA boards equipped with an HSMC connector — including Stratix IV GX and DE4 — the module is used in networking projects, data transmission applications, and high-throughput interface testing.

The TerasIC P0057 kit enables testing, debugging, and signal simulation in systems using the HSMC interface. It is intended for design and diagnostic work with FPGA main boards and other systems equipped with an HSMC connector.

The A-Cute Car is an FPGA-based three-wheeled robotic car kit. This car can provide higher operation performance than the MCU based robotic car, because the FPGA provides more powerful computing power than the MCU. P0467

Development platform based on Intel MAX 10 FPGA. The system provides the user with 50,000 logical elements and 1638 kbits M9K and 5888 kbits Flash. The board contains components such as embedded USB-Blaster II, QSPI Flash, ADC connector, WS2812B RGB LED and 2x6 TMD connector. TerasiC T-Core P0633

Set with FPGA Terasic DE10-Nano board and WiFi module. Designed for projects using FPGA to work in the cloud. TerasIC P0700

The XTS-FMC module is an extension for FPGA devices that allows access to communication channels via the SMA connector. P0401

TerasIC ICB-HSMC is a communication card for FPGA systems, equipped with RS-232, RS-485, and CAN interfaces, as well as GPIO and PIO ports for expansion. It enables rapid deployment and testing of industrial communication systems and the implementation of fieldbuses in automation and control applications.

Altera DE0 NANO Development and Education Board introduces a compact-sized FPGA development platform suited for prototyping circuit designs such as robots and "portable" projects. The board is designed to be used in the simplest possible implementation targeting the Cyclone IV device up to 22,320 LEs.

The Terasic LT24 is a 2.4” LCD touch module with 240(H) x 320(V) display resolution. It can be bundled with various Terasic FPGA development boards through the 2x20 GPIO interface. P0185

FPGA starter kit with Intel Stratix 10 SX chip. The module has integrated transceivers that transmit data at speeds up to 28.3 Gb/s, making DE10-Pro fully compatible with version 3.0 of the PCI Express standard. The DE10-Pro offers fast parallel Flash memory and four SO-DIMMs that have 4 GB DDR4 SDRAM. Terasic P0627

Terasic Atum A5 Development Kit – an advanced Intel Agilex 5 FPGA kit for AI, vision systems, and high-bandwidth applications. Terasic Atum A5 Development Kit

VEEK-MT2S is a development board based on the Cyclone V SX SoC Cyclone V SX SoC-5CSXFC6D6F31C6N chip. Included in addition to the board with programmable FPGA, there are also a 7-inch TFT touchscreen with a resolution of 800 x 480 pixels, 8 megapixel camera (3264 x 2448 pixels), light sensor IMU 9DOF sensor (accelerometer, gyroscope, magnetometer) . Terasic K0161

Development platform based on Intel MAX 10 FPGA. The system provides the user with 50,000 logical elements and 1638 kbits M9K and 5888 kbits Flash. The board contains components such as built-in USB-Blaster II, QSPI Flash, ADC connector, WS2812B RGB LED and 2x6 TMD connector. Academic version. TerasiC T-Core P0633

VEEK-MT2S is a development board based on the Cyclone V SX SoC Cyclone V SX SoC-5CSXFC6D6F31C6N chip. Included in addition to the board with programmable FPGA, there are also a 7-inch TFT touchscreen with a resolution of 800 x 480 pixels, 8 megapixel camera (3264 x 2448 pixels), light sensor IMU 9DOF sensor (accelerometer, gyroscope, magnetometer) . Terasic K0161

Programmable Logic IC Development Tools Cyclone V SE 5CSEMA4U23C6N + 800MHz Dual-core ARM Cortex-A9 processor. Terasic P0496