Terasic SoC System on Module - development kit FPGA

TerasIC CLR-HSMC (P0079) enables the integration of industrial cameras with a Camera Link interface into FPGA boards via the HSMC connector, supporting image transmission in base, medium, and dual base modes. The module is used in vision systems, production lines, and projects involving real-time image processing.

The DE10-Standard Development Kit presents a robust hardware design platform built around the Intel System-on-Chip (SoC) FPGA, which combines the latest dual-core Cortex-A9 embedded cores with industry-leading programmable logic for ultimate design flexibility. P0493

[EDUCATIONAL PRICE] FPGA starter kit equipped with Cyclone V GT with 301K LE and minicomputer with Intel Celeron Dual Core (64 GB eMMC, 4 GB RAM). The FPGA module has 1 GB DDR3 memory, 64 MB SDRAM memory, UART-USB interface and extensions such as GPIO and Arduino. Terasic P0650

VEEK-MT2S is a development board based on the Cyclone V SX SoC Cyclone V SX SoC-5CSXFC6D6F31C6N chip. Included in addition to the board with programmable FPGA, there are also a 7-inch TFT touchscreen with a resolution of 800 x 480 pixels, 8 megapixel camera (3264 x 2448 pixels), light sensor IMU 9DOF sensor (accelerometer, gyroscope, magnetometer) . Terasic K0161

The Terasic VEEK-MT2 set provides a complete hardware-software platform for designing embedded and multimedia systems using FPGA chips. It enables the creation and testing of interactive, control, and measurement applications thanks to an extensive base of interfaces, memory, and sensors.

TerasIC XTS-HSMC is an expansion card for FPGA platforms with transceivers, enabling signal conversion to SMA connectors and rapid prototyping of high-throughput interfaces. It is useful in compliance testing, transmission quality evaluation, and projects requiring reliable data transfer at gigabit speeds.

TerasIC TR4-230 (P0107) provides a development platform based on the Stratix IV GX FPGA, featuring a wide range of interfaces and support for PCI Express projects and high-speed DDR3 memory. The solution is designed for communication systems, ASIC prototyping, and applications requiring high logic resource capacity.

MAX 10 10M50DAF484C6G with 50K LEs, DDR3 with ECC, QSPI Flash, MicroSD Card, Ethernet, Audio codec, HDMI RX, Acceleromter, ADC, DAC, 8-Mega pixel color camera and 7" 5-point touch screen. P0800

Altera DE0 NANO Development and Education Board

The robust hardware design platform built around the Altera System-on-Chip (SoC) FPGA, which combines the latest dual-core Cortex-A9 embedded cores with industry-leading programmable logic for ultimate design flexibility. Users can now leverage the power of tremendous re-configurability paired with a high-performance, low-power processor system.

Altera DE0 NANO Development and Education Board introduces a compact-sized FPGA development platform suited for prototyping circuit designs such as robots and "portable" projects. The board is designed to be used in the simplest possible implementation targeting the Cyclone IV device up to 22,320 LEs.

TerasIC USB Blaster Download Cable (UBT) is a fully Altera USB Blaster–compatible JTAG/ISP programmer for CPLD and FPGA devices. With a reliable design and resistance to interference, it is a universal tool for designers working with Altera programmable devices. TerasIC P0302

Evaluation module with Intel Stratix 10 SoC processor with 2800K logic elements. The module has DDR4 SDRAM memory (up to 64 GB), built-in USB-Blaster II, Ethernet, microSD, miniUSB and expandable FMC/FMC+ connectors. TerasIC Apollo S10 SoM Board (P0630)

The Terasic DE25-Nano development board with Agilex™ 5 FPGA and ARM Cortex-A76/A55 HPS system is a modern platform for AI applications, vision processing, and embedded systems. A rich set of interfaces and memory, active cooling, and compact dimensions allow it to be used both in prototyping and in final industrial solutions.

Terasic DE10-Lite Board is a low-budget development board with the Altera MAX 10 FPGA chip. The board contains a number of components enabling learning and prototyping of projects based on FPGA chips

Development platform based on Intel MAX 10 FPGA. The system provides the user with 50,000 logical elements and 1638 kbits M9K and 5888 kbits Flash. The board contains components such as embedded USB-Blaster II, QSPI Flash, ADC connector, WS2812B RGB LED and 2x6 TMD connector. TerasiC T-Core P0633