OpenVINO Starter Kit - FPGA development kit
ID: 574893
zł4,808.13
Tax included
zł3,909.05 tax excl.
FPGA starter kit equipped with Cyclone V GT with 301K LE and supports PCIe Gen 2x4. The board has 1 GB DDR3 memory, 64 MB SDRAM memory, UART-USB interface and extensions such as GPIO and Arduino. Terasic P0559
Description
OpenVINO is a high performance PCIe based FPGA starter kit. It is equipped with Cyclone V GT with 301K LE and supports PCIe Gen 2x4. The board has 1 GB DDR3 memory, 64 MB SDRAM memory, UART-USB interface and extensions such as GPIO and Arduino. This makes the OpenVINO starter kit a configurable platform combining high computing performance and low energy consumption.
The OpenVINO package contains reference projects for all peripherals of the set and detailed instructions for programmers.
Features
- FPGA Device (Cyclone V)
- 301K Programmable Logic Elements
- 13,917 Kbits embedded memory
- Eight Fractional PLLs
- Two Hard Memory Controllers
- Nine Transceivers (the GT speed is 6.144G, and GX speed is 3.125G )
- Configuration and Debug
- Quad Serial Configuration device-EPCQ256
- On-Board USB Blaster II (Mini-B USB connector)
- Memory Device
- 64MB (32M x16) SDRAM
- 1GB (2 x256M x16) DDR3 SDRAM
- Communication
- UART to USB（Mini-B USB connector）
- GT device supports PCIe Gen2x 4(GX device supports PCIe Gen1x 4)
- Expansion I/O
- 2 x40 GPIO Header
- 36 General GPIO Pins
- Support 8 pairs LVDS TX and 8 pairs LVDS RX
- Diode protection circuit
- Configurable I/O standards: 1.5/1.8/2.5/3.3V
- One Arduino Uno Revision 3 Expansion HearderSMA IN/OUT 3.3V single port
- 2 x40 GPIO Header
- Analog ADC
- SPI Interface
- 500Ksps Sampling Rate
- Eight Channels
- 12-Bit Resolution
- Analog Input Range：0 ~ 4.096 V
- Resolution: 12-bit
- Digital IO
- Diode protection circuit
- Switches, Buttons, LED, and 7-Segments
- 5 User Buttons (4 normal buttons, one CPU_RESET_n)
- 4 User Switches
- 4 LEDs
- 2 7-Segments
- Power
- 12V DC input
- PCIe 12V Input
- Cooling
- 12V, 5000 Speed Fan
- Dimensions: 167.6 x 83.2 mm
Description of connectors
Kit contains
- OpenVINO Starter Kit Development Board
- OpenVINO Starter Kit Quick Start Guide
- PCIe Bracket (Installed)
- Fan (Installed)
- Screw and Silicon Footstands Package
- AC Power Cord
- Power Adapter
- USB to miniUSB Cable
574893
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
TerasIC DE0 is a complete evaluation kit based on the Cyclone III FPGA, designed for learning, testing, and implementing digital systems. It offers a wide range of interfaces and peripherals enabling the creation of complex projects for both educational and industrial purposes.
zł1,138.35
Delivery date unknown
No product available!
VEEK-MT2S is a development board based on the Cyclone V SX SoC Cyclone V SX SoC-5CSXFC6D6F31C6N chip. Included in addition to the board with programmable FPGA, there are also a 7-inch TFT touchscreen with a resolution of 800 x 480 pixels, 8 megapixel camera (3264 x 2448 pixels), light sensor IMU 9DOF sensor (accelerometer, gyroscope, magnetometer) . Terasic K0161
zł6,165.31
Delivery date unknown
No product available!
Other products in the same category (16)
Terasic DE10-Lite is a cost-effective Altera MAX 10 based FPGA board. Kit contains lots of reference designs and software utilities for users to easily develop their applications based on these design resources
zł1,029.52
24h
Available quantity: 4
Available
Terasic DE10-Lite Board is a low-budget development board with the Altera MAX 10 FPGA chip. The board contains a number of components enabling learning and prototyping of projects based on FPGA chips
zł528.36
24h
Available quantity: 9
Available
The motor driver card can drive 24 servo motors at most. It can be used to drive a multiple-joint robot machine, such as Hexapod Robot, Biped Robot, and Arm Robot. P0288
zł455.10
24h
Available quantity: 1
Available
8 Mega Pixel Digital Camera Package with FMC interface
zł1,327.99
4 weeks
No product available!
The Video and Embedded Evaluation Kit - Multi-touch, Second Edition, on Cyclone® V SoC Development Board (VEEK-MT2-C5SoC)
zł13,054.81
4 weeks
No product available!
The ADC-SoC is a SoC FPGA motherboard with dual-channel high-speed ADC
zł4,931.45
4 weeks
No product available!
A set of elements designed for evaluation sets with programmable circuits of the Cyclone V SoC FPGA family, which includes; 7-inch TFT display with touch support (5-points), 8 megapixel camera with autofocus and sensors (light, accelerometer, gyroscope, magnetometer). Terasic P0494
zł2,386.05
4 weeks
No product available!
Terasic HDMI-FMC is a HDMI transmitter/receiver daughter board with FMC (FPGA Mezzanine card) interface
zł2,428.50
24h
Available quantity: 1
Available
Gigabit Ethernet transceiver with an FMC interface. Up to 1 Gbps network transfers with the host board using an FMC connector. NET-FMC can be connected any FMC(HPC) interfaces. Terasic P0481
zł2,779.43
4 weeks
No product available!
The DE10-Standard Development Kit presents a robust hardware design platform built around the Intel System-on-Chip (SoC) FPGA, which combines the latest dual-core Cortex-A9 embedded cores with industry-leading programmable logic for ultimate design flexibility. P0493
zł2,055.85
24h
Available quantity: 1
Available
The DE10-Standard Development Kit presents a robust hardware design platform built around the Intel System-on-Chip (SoC) FPGA, which combines the latest dual-core Cortex-A9 embedded cores with industry-leading programmable logic for ultimate design flexibility. P0493
zł3,250.79
4 weeks
No product available!
Programmable Logic IC Development Tools Cyclone V SE 5CSEMA4U23C6N + 800MHz Dual-core ARM Cortex-A9 processor. Terasic P0496
zł1,615.56
24h
Available quantity: 1
Available
Programmable Logic IC Development Tools Cyclone V SE 5CSEMA4U23C6N + 800MHz Dual-core ARM Cortex-A9 processor. Terasic P0496
zł1,266.60
24h
Available quantity: 7
Available
VEEK-MT2S is a development board based on the Cyclone V SX SoC Cyclone V SX SoC-5CSXFC6D6F31C6N chip. Included in addition to the board with programmable FPGA, there are also a 7-inch TFT touchscreen with a resolution of 800 x 480 pixels, 8 megapixel camera (3264 x 2448 pixels), light sensor IMU 9DOF sensor (accelerometer, gyroscope, magnetometer) . Terasic K0161
zł5,208.48
4 weeks
No product available!
VEEK-MT2S is a development board based on the Cyclone V SX SoC Cyclone V SX SoC-5CSXFC6D6F31C6N chip. Included in addition to the board with programmable FPGA, there are also a 7-inch TFT touchscreen with a resolution of 800 x 480 pixels, 8 megapixel camera (3264 x 2448 pixels), light sensor IMU 9DOF sensor (accelerometer, gyroscope, magnetometer) . Terasic K0161
zł6,165.31
4 weeks
No product available!
The adapter is designed to connect boards with a PCIe connector to a computer. Can support PCIe Gen3 x4 interface. Terasic P0492
zł1,133.36
24h
Available quantity: 1
Available
FPGA starter kit equipped with Cyclone V GT with 301K LE and supports PCIe Gen 2x4. The board has 1 GB DDR3 memory, 64 MB SDRAM memory, UART-USB interface and extensions such as GPIO and Arduino. Terasic P0559