LCD12864-NEG_BLUE

1.9inch Touch LCD is a compact IPS display with capacitive touch, designed for projects based on microcontrollers and single-board computers. Thanks to the SPI and I2C interfaces and built-in logic level conversion, it allows easy integration with platforms such as Raspberry Pi, ESP32, STM32, and Arduino.

TFT 1.8 "display module with SD, ST7735S, RoHS socket

128x64 graphic LCD display with LED backlight. Module with white background. Electronic Assembly DOGM128W-6

LCD display module, with IPS screen, 1.69 inch diagonal, 240 x 280 resolution, with built-in controller, communication is via SPI interface.

Graphic LCD (Nokia 5110)

1.8inch LCD for micro:bit is an overlay with LCD display. The screen has a resolution of 160x128 pixels. The module has a standard micro: bit interface. 1.8inch LCD for micro: bit

IPS display module with a diagonal of 1.69" and rounded corners with a resolution of 240(H) x 280(V), with the ST7789 controller. It is characterized by a display area of 28 x 32.6 mm, operating temperature from -20 to 70°C and a logic voltage of 3.3 V

A small LCD panel with the ability to control its transparency. The panel can block up to about 95% of light. Adafruit 3627

The STN 128×64 display in negative blue mode with a TOSHIBA T6963C controller enables easy control of graphics and text. Thanks to its extended temperature range and LED backlight, it is suitable for industrial, mobile, and devices operating in variable environmental conditions.

The 1.3 "LCD display and 168 x 144 pixel resolution is a combination of an e-ink display (e-paper) with LCD display, which is characterized by extremely low energy consumption by the eInk system and fast refresh of the LCD display. Adafruit 3502

Graphic LCD 122x32, 80x36mm, LED backlight WHITE, FSTN, enhanced temperature range, NJU6450A controller

LCD graphic display 128x64, KS0108 LCD controller, FSTN, NEGATIVE BLACK, LED backlight (white), 1x20 pin header for evaluation boards

Graphic LCD 122x32, 84x44mm, LED backlight yellow/green, enhanced temperature range

Module with a 1.44 "color liquid crystal display and 128 x 128 pixel resolution The display has a built-in ILI9163C driver. Thanks to the pin connector, the module can be easily attached to the contact plate or wires 1.44 \'SPI 128 * 128 V2.1

2.4 "TFT LCD display module with SD card slot. Resolution 240x320. Based on the ILI9341 controller. Powered by 3.3V or 5V.

TFT color display with 160x80 pixel resolution and 0.96 inch diagonal. The SPI interface is used to communicate with the display. The module contains a microSD card slot. Adafruit 3533