.png)
OLED Display 0.96" 128 × 64px I2C Qwiic - Soldered
ID: 1208285
zł41.24
Tax included
zł33.53 tax excl.
Graphic OLED display with a 0.96" diagonal and 128 × 64px resolution, featuring white pixels and an SSD1306 controller. It communicates via I2C, while two Qwiic connectors allow connection to a compatible board without soldering. Designed for displaying text, icons, and measurement results. Soldered 333099
Description
The device OLED Display SSD1306 0.96" by Soldered features a 0.96" diagonal and a resolution of 128 × 64px. The monochrome screen displays text and graphics in white on a dark background. Each active pixel emits its own light, so no additional backlight is required. The module can be used to display measurement results, messages, icons, and simple menus.
Communication with a microcontroller is handled via the I2C interface with a default address of 0x3C. Two Qwiic connectors, compatible with easyC and STEMMA QT, allow the display to be connected to a compatible controller board and additional devices to be added to the bus without soldering. The board also includes GND, VCC, SDA, and SCL solder pads for installing the included pin header.
In the factory configuration, supplying power through the VCC pin requires 5V, which is reduced to 3.3V by the onboard voltage regulator. The Qwiic connectors operate with a 3.3V, 5V supply and logic levels. Supplying 3.3V directly through the VCC pin requires the jumpers to be configured according to the manufacturer's documentation. Current consumption is approximately 20mA and depends on the number of active pixels.
The manufacturer provides an Arduino library with examples and a MicroPython module for controlling the display. The board measures 30 × 30mm and includes two mounting holes for M3 screws, allowing the module to be installed in an enclosure or device structure.
Features
- Display
- Technology: OLED
- Controller: SSD1306
- Screen diagonal: 0.96"
- Resolution: 128 × 64px
- Display color: white
- Monochrome image
- Self-emissive pixels with no additional backlight required
- Communication and connectors
- Interface: I2C
- Default I2C address: 0x3C
- Connectors: 2 × Qwiic, compatible with easyC and STEMMA QT
- Solder pads for pin header installation: GND, VCC, SDA, SCL
- Power supply
- Supply voltage via the VCC pin in the factory configuration: 5V
- Onboard 3.3V voltage regulator
- Qwiic connector supply voltage and logic level: 3.3V, 5V
- 3.3V supply via the VCC pin possible after changing the jumper configuration
- Current consumption: approximately 20mA, depending on the number of active pixels
- Software
- Arduino library with examples provided by the manufacturer
- MicroPython module for display control
- Mechanical parameters
- Board dimensions: 30 × 30mm
- Two mounting holes for M3 screws
Kit includes
- OLED SSD1306 0.96" display module, white version
- 4-pin header for soldering
1208285
Data sheet
- Screen type
- OLED
- Diagonal (inch)
- 0,96
- Resolution
- 128 x 64 px
- Interface
- I2C
- Touch
- No
You might also like
Graphic OLED display with a 0.96" diagonal and 128 × 64px resolution, featuring blue pixels and an SSD1306 controller. It communicates via I2C, while two Qwiic connectors allow connection to a compatible board without soldering. Designed for displaying text, icons, and measurement results. Soldered 333100
zł41.92
24h
Available quantity: 3
Available
Other products in the same category (16)
Module with a black and white OLED display with a diagonal of 1.3" and a resolution of 128x64 px. Designed for minicomputers Raspberry Pi. Adafruit 3531
zł114.08
24h
Available quantity: 1
Available
Module with a black and white OLED display 1.3" with a resolution of 128x64 pixels. Designed for M5Stack sets. It communicates via the I2C interface. M5Stack U119
zł61.17
24h
Available quantity: 1
Available
Module with a black and white OLED display with a diagonal of 1.12" and a resolution of 128x128 px. The board is equipped with a Grove connector and communicates via the I2C and SPI interface. Seeed Studio 104020250
zł61.24
4 weeks
No product available!
Module with a 1.51" OLED transparent display. Communicates via the SPI or GDI interface. DFRobot DFR0934
zł231.73
24h
Available quantity: 1
Available
Module with a color OLED 1.5" display with a resolution of 128x128. Communicates via the SPI interface. Waveshare 1.5inch RGB OLED Module
zł102.36
24h
Available quantity: 11
Available
Black and white OLED display with a resolution of 128x32 pixels. Powered with the voltage from 3.3 V to 5V, it communicates via the I2C interface. Waveshare 0.91inch OLED Module
zł27.95
4 weeks
No product available!
Module with 1.51 "OLED transparent display. Communicates via SPI or I2C interface. Waveshare 1.51inch Transparent OLED
zł93.27
4 weeks
No product available!
QLED IPS 15.6" display with touch panel and Quantum Dot technology. Equipped with HDMI interface for image display and USB for touch panel. Resolution 1920x1080 pixels. Waveshare 15.6HP-CAPQLED-EU
zł899.79
4 weeks
No product available!
The module with a black and white OLED display, 0.96" diagonal and 128x64 pixels resolution. Equipped with an XH2.54 connector, communicates via the I2C interface
zł22.41
24h
Available quantity: 10
Available
A 0.66" monochrome OLED display module with 64x48 pixel resolution. It uses the SSD1306 controller and communicates via an I2C or SPI interface. It has a soldered connector. SparkFun LCD-13722
zł110.77
24h
Available quantity: 2
Available
A 0.96-inch yellow-blue OLED display that allows basic graphics and text to be displayed. It has a resolution of 128 x 64 pixels and communicates via an SPI or I2C interface. Waveshare 0.96inch OLED Module (C)
zł16.30
24h
Available quantity: 12
Available
A 0.96-inch white OLED display that allows basic graphics and text to be displayed. It has a resolution of 128 x 64 pixels and communicates via an SPI or I2C interface. Waveshare 0.96inch OLED Module (E)
zł18.89
24h
Available quantity: 2
Available
A 0.96-inch blue OLED display that allows basic graphics and text to be displayed. It has a resolution of 128 x 64 pixels and communicates via an SPI or I2C interface. Waveshare 0.96inch OLED Module (E)
zł18.33
24h
Available quantity: 5
Available
Black and white 1.32" OLED display with a resolution of 128x96 pixels. Powered from 3.3V to 5V, it communicates via SPI or I2C interface. Waveshare 1.32inch OLED Module
zł30.41
4 weeks
No product available!
Module with 1.27" OLED colour display with 128x96 resolution. It communicates via an SPI interface. Waveshare 1.27inch RGB OLED Module
zł78.03
4 weeks
No product available!
Black-and-white 1.5" OLED display with a resolution of 128x128 pixels. Power supply from 3.3 V to 5V, communicates via the SPI or I2C interface. Waveshare 1.5inch OLED Module (B)
zł51.54
4 weeks
No product available!
Graphic OLED display with a 0.96" diagonal and 128 × 64px resolution, featuring white pixels and an SSD1306 controller. It communicates via I2C, while two Qwiic connectors allow connection to a compatible board without soldering. Designed for displaying text, icons, and measurement results. Soldered 333099