| Driver Chip | SSD1331 |
|---|---|
| Interface | SPI |
| Resolution | 96×64 |
| Display Size | 0.95inch |
| Colors | 65K colorful |
| Visible Angle | >160° |
| Operating Temp. (?) | -20~70 |
| Storage Temp. (?) | -30~80 |
| Operating Voltage | 3.3V / 5V |
| PIN NO. | SYMBOL | DESCRIPTION |
|---|---|---|
| 1 | VCC | Power positive (3.3~5V power input) |
| 2 | GND | Ground |
| 3 | NC | NC |
| 4 | DIN | Data input |
| 5 | CLK | Clock signal input |
| 6 | CS | Chip selection, low active |
| 7 | D/C | Command signal, low level for command, high level for data |
| 8 | RES | Reset signal, low active |
The 0.95inch RGB OLED provides 2 options for the onboard pinheader:
Development resources: demo codes, schematic, datasheets, etc.
Wiki: www.waveshare.com/wiki/0.95inch_RGB_OLED_(B)

| Part Number | Color | Resolution | Display Size (mm×mm) | Interfaces | Driver | Dimension (mm×mm) | Pinheader |
|---|---|---|---|---|---|---|---|
| 0.95inch RGB OLED (A) | 65K colorful | 96×64 | 20.14×13.42 | SPI(4-wire SPI) | SSD1331 | 31.7×37.0 | curved/horizontal |
| 0.95inch RGB OLED (B) | 65K colorful | 96×64 | 20.14×13.42 | SPI(4-wire SPI) | SSD1331 | 31.7×37.0 | straight/vertical |
| 0.96inch OLED (A) | 1/4 yellow section, 3/4 blue section | 128×64 | 21.7×11.2 | 3-wire SPI, 4-wire SPI, I2C | SSD1306 | 33.0×33.5 | curved/horizontal |
| 0.96inch OLED (B) | 1/4 yellow section, 3/4 blue section | 128×64 | 21.7×11.2 | 3-wire SPI, 4-wire SPI, I2C | SSD1306 | 33.0×33.5 | straight/vertical |
| 1.3inch OLED (A) | Blue | 128×64 | 29.42×14.7 | 3-wire SPI, 4-wire SPI, I2C | SH1106 | 40.5×37.5 | curved/horizontal |
| 1.3inch OLED (B) | Blue | 128×64 | 29.42×14.7 | 3-wire SPI, 4-wire SPI, I2C | SH1106 | 40.5×37.5 | straight/vertical |
Weight: 0.006 kg
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Graphical display, users may show off graphs, full-color pictures, text, and anything else they want to see by communicating with it through SPI. Digilent 410-323
0.95inch RGB OLED, SPI interface, curved/horizontal pinheader
Module with 1.51 "OLED transparent display. Communicates via SPI or I2C interface. Waveshare 1.51inch Transparent OLED
No product available!
Module with OLED display, 2.23" diagonal and 128x32 px resolution. Communication via SPI or I2C interface. Waveshare Pico-OLED-2.23
Black and white OLED display with a resolution of 128x32 pixels. Powered with the voltage from 3.3 V to 5V, it communicates via the I2C interface. Waveshare 0.91inch OLED Module
Gravity I2C OLED-2864 Display is an OLED display with I2C interface with 128x64 resolution, powered by 3.3-5V. DFRobot DFR0486
No product available!
2.23" OLED display overlay designed for Raspberry Pi minicomputers. Module based on SSD1305 driver, communicates via SPI or I2C interface. Waveshare 2.23inch OLED HAT
No product available!
The module with a black and white OLED display with a diagonal of 1.12" and a resolution of 128x128 pixels. It uses the SH1107 controller and communicates via the I2C interface. Pimoroni PIM374
1.26" OLED display with a resolution of 50x16 pixels. 6800, 8080 or SPI interface, has a built-in WS0010 controller. Yellow color. WEG005016ALPP5N00100
No product available!
Module with OLED display 0.66" with a resolution of 64x48 px with displayed content in white. It communicates via the SPI interface. ModOLEDdisp0.66"SPIwhite
2.42-inch OLED display with a resolution of 128x64 pixels with an SSD1309 controller and an SPI interface. It provides high contrast, wide viewing angles, and reliable operation in temperatures from -30°C to 85°C. It operates at a voltage of 2.4 to 3.6 V, and the green display color ensures good readability even in low light. modOLED2.42-G
No product available!
Module with OLED display, 1.3" diagonal and 64x128 px resolution. Communication via SPI or I2C interface. Waveshare Pico-OLED-1.3
Black and white 1.32" OLED display with a resolution of 128x96 pixels. Powered from 3.3V to 5V, it communicates via SPI or I2C interface. Waveshare 1.32inch OLED Module
No product available!
100x16 Graphic OLED Display, 80x36mm, Negative Black Surface, Yellow Dot, 5V, RoHS
OLED display 128x64 pixels, white characters / black background, 1.3-3V power supply, SSD1306 or SH1106G controller, communication via I2C and SPI interfaces, PARALLEL WHITE display color, working temperature from -40 to +70, ext. CAP
Module with black and white OLED display, 0.96" diagonal and 128x64 px resolution. Equipped with STEMMA QT connector, communicates via I2C or SPI interface. Adafruit 326
A 0.96-inch yellow-blue OLED display that allows basic graphics and text to be displayed. It has a resolution of 128 x 64 pixels and communicates via an SPI or I2C interface. Waveshare 0.96inch OLED Module (C)
A 1.54-inch blue OLED display that allows you to display basic graphics and text. It has a resolution of 128 x 64 pixels and communicates via the SPI or I2C interface. Waveshare 1.54inch OLED Module (B)