An expansion board that allows you to connect Qwiic and STEMMA QT compatible modules to the evaluation kit via the Grove I2C interface. The board can be used with the Base Shield V2 and Arduino extension. The module has a built-in voltage level converter and is supplied with the voltage of 3.3 V or 5 V. Full documentation with examples of use is available on the product page.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
No product available!
A set with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. The user has, among others: 54 I / O lines, 14 PWM channels, 16 analog inputs. Arduino A000067
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
The expansion module is designed for Arduino Mega and Google ADK boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020027
Flexible 4-core cable, 200 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17258
Module with a 12-channel capacitive touch sensor MPR121. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020872
Starter kit with 10 basic Grove modules and Base Shield V2 extension designed to work with Arduino boards. The user has at his disposal a number of lessons to get to know the possibilities of the set. Seeed Studio 103030375
Doppler radar module with 24GHz BGT24LTR11 transceiver. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 109020021
No product available!
Module with ITR9909 proximity sensor that can detect the presence of objects in the range from 9 to 30 cm. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020175
Module with LED driver. It can control LED strips with a length of 1 to 2 meters at a voltage of 9 V or from 1 to 5 meters at a voltage of 12 V. Seeed Studio 105020002
Two-button module with 4 colored overlays. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 111020103
Module with a sound sensor based on an electret microphone and LM358 amplifier. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020023
Module with 10 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020131
Module with temperature sensor MCP9808. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020556
Module with humidity and air temperature sensor based on the AM2302 system. It allows temperature measurement in the range from -40 to 80 ° C and the humidity measurement takes place in the range of 5 to 99% RH. The module has a connector in accordance with the Grove standard. Seeed Studio 101020019
0.96" OLED display in yellow and blue, based on the SSD1315 controller, equipped with a Grove interface supporting SPI and I2C communication and powered from 3.3–5 V. Seeed Studio 104020249
No product available!
Module with slot optical sensor TCUT1600X01. The board is equipped with a Grove connector and has two digital outputs. Seeed Studio 101020587
The sensor is designed for indoor air quality testing. The main gas detected is carbon monoxide, alcohol, acetone, thinner, formaldehyde and other slightly toxic gases. It is compatible with 5V and 3.3V power supply. Seeed Studio 101020078
Module with 4-digit 7-segment display with red digits. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 111020044
Module with RGB LED WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020169
Grove module with FSR402 pressure sensor. The board is equipped with a Grove connector with an analog output. Seeed Studio 101020553
No product available!
Expansion module with Qwiic connectors. The board is equipped with a Grove connector and allows communication via the I2C interface. Seeed Studio 103020292