zł568.92 tax excl.
Industrial IoT gateway for communication over LTE 450 networks and integration of automation and technical infrastructure devices with IP networks; 4G LTE Cat 1 up to 10 Mbps download and 5 Mbps upload; 450 MHz band; 2G support; Dual SIM; 1 x Ethernet 10/100 Mbps; RS232; RS485; 3 x configurable digital I/O; 1 x analog input 0-30 V; Modbus TCP/RTU; BACnet/IP and BACnet over RS485; OPC UA; MQTT; DNP3; DLMS/COSEM; VPN; 9-57 VDC power supply; aluminium housing; IP30; operating temperature from -40°C to 75°C. Teltonika TRB236 Cat1 LTE450
Industrial IoT gateway designed for cellular communication over the LTE 450 band and data exchange between automation equipment, meters, controllers, and remote monitoring systems. Teltonika TRB236 Cat1 LTE450 supports 4G LTE Cat 1 with download speeds up to 10 Mbps and upload speeds up to 5 Mbps, as well as 2G connectivity up to 236.8 kbps. Operation in the 450 MHz band supports communication in distributed utility, energy, telemetry, and infrastructure installations. Two Mini SIM slots enable connection redundancy scenarios. The 10/100 Mbps Ethernet interface, RS232, and RS485 provide connectivity for both IP-based and serial industrial equipment. Supported industrial and IoT protocols include Modbus TCP/RTU, BACnet, OPC UA, MQTT, DNP3, and DLMS/COSEM.
Network functions include static and dynamic routing, VLAN, failover, QoS, firewall, and VPN technologies including OpenVPN, IPsec, WireGuard, ZeroTier, and DMVPN. Three configurable digital I/O channels and an 0-30 V analog input provide signal monitoring and control capabilities for external equipment. OpenWrt-based RutOS supports management through WebUI, SSH, SNMP, FOTA, and Teltonika RMS. The 9-57 VDC input range, aluminium housing, IP30 protection rating, and operating temperature from -40°C to 75°C allow the TRB236 to operate in distributed telemetry systems, utilities, energy infrastructure, and industrial remote monitoring and control installations.
Data sheet
Compact mounting kit designed for installing compatible Teltonika Networks devices on a standard 35 mm DIN rail. The holder is made of PP FH44 material, while its compact dimensions of 70 x 25 x 14.5 mm facilitate installation of routers, modems, gateways and switches in control cabinets and industrial systems. Teltonika PR5MEC11
Metal mounting kit designed for installing compatible Teltonika Networks devices on a standard 35 mm DIN rail. The holder is made of low-carbon steel, while its dimensions of 65.2 x 44.2 x 1.5 mm allow routers, modems, gateways and switches to be installed in control cabinets, distribution boards and industrial installations. Teltonika PR5MEC00
Industrial 5G router for IoT systems, automation, edge computing and infrastructure requiring high-speed data transmission; 5G Sub-6 GHz SA/NSA up to 3.4 Gbps download and 900 Mbps upload; 4G LTE Cat 19/18 up to 1.6 Gbps / 200 Mbps; 3G; Dual SIM and eSIM; dual-band WiFi 6 with MU-MIMO up to 2402 Mbps at 5 GHz and 576 Mbps at 2.4 GHz; up to 512 WiFi clients; 1 WAN port and 4 Gigabit Ethernet LAN ports; Docker; dual-core 1.3 GHz ARM Cortex-A53 processor; 1 GB DDR4 RAM; 8 GB eMMC; GNSS; USB 2.0; digital input and output; TPM 2.0; Modbus TCP/USB, DNP3, DLMS/COSEM, OPC UA, BACnet and MQTT; passive PoE 9-50 VDC; RutOS; Teltonika RMS; operating temperature from -40°C to 75°C. Teltonika RUTC50
Industrial global 5G edge router for IoT systems, automation and distributed industrial networks; Telit 5G Sub-6 GHz SA/NSA modem with up to 3.4 Gbps download and 900 Mbps upload; 4G LTE Cat 19/18 up to 1.6 Gbps / 211 Mbps; 3G; Dual SIM and eSIM; automatic Failover and Load Balancing; dual-band WiFi 6 with MU-MIMO up to 2402 Mbps at 5 GHz and 576 Mbps at 2.4 GHz; up to 512 WiFi clients; 1 WAN port and 4 Gigabit Ethernet LAN ports; Docker; dual-core 1.3 GHz ARM Cortex-A53 processor; 1 GB DDR4 RAM; 8 GB eMMC; GNSS; USB 2.0; digital input and output; TPM 2.0; Modbus TCP/USB, DNP3, DLMS/COSEM, OPC UA, BACnet and MQTT; passive PoE 9-50 VDC; RutOS; Teltonika RMS; operating temperature from -40°C to 75°C. Teltonika RUTC54
Industrial cellular router for IoT, M2M, automation and mobile installations; 4G LTE Cat 6 up to 300 Mbps download and 50 Mbps upload; 3G up to 42/5.76 Mbps; Dual SIM with automatic switching; Carrier Aggregation; 1 WAN port and 3 Gigabit Ethernet LAN ports; support for up to 128 port- and tag-based VLANs; GNSS with GPS, GLONASS, BeiDou, Galileo and QZSS; USB 2.0; digital input and output; Modbus TCP/USB, DNP3, DLMS/COSEM, OPC UA, BACnet and MQTT; VPN; passive PoE 9-50 VDC; RutOS; Teltonika RMS; operating temperature from -40°C to 75°C. Teltonika RUTM09
The industrial cellular router provides 4G LTE Cat 6 connectivity, four Gigabit Ethernet ports, and dual-band Wi-Fi 5. Dual SIM support, GNSS, Wi-Fi Mesh, Fast Roaming, and failover functions support deployment in industrial and IoT networks requiring redundant connectivity. Teltonika RUTM11
The industrial cellular router provides 4G LTE Cat 6 connectivity, five Gigabit Ethernet ports, and dual-band Wi-Fi 5. Integrated eSIM support, Wi-Fi Mesh, Fast Roaming, and extensive network interfaces support deployment in IoT, transport, robotics, roadside infrastructure, and other distributed industrial systems. Teltonika RUTM16
The industrial cellular router provides global 5G connectivity, Wi-Fi 5, and wired Ethernet communication. Dual SIM, integrated eSIM, automatic failover, and PoE support enable deployment in compact IoT and IIoT installations requiring redundant network access. Teltonika RUTM20
The industrial cellular router provides 5G SA/NSA connectivity with backward compatibility for 4G LTE Cat 19 and 3G networks. Dual SIM, eSIM, two Gigabit Ethernet ports, dual-band Wi-Fi, and automatic failover support high-speed and redundant connectivity in IoT and M2M installations. Teltonika RUTM30
The industrial cellular router provides 5G SA/NSA connectivity with backward compatibility for 4G LTE Cat 19/18 networks. Dual SIM support, five Gigabit Ethernet ports, Wi-Fi, GPS, and automatic failover enable deployment in industrial networks requiring high-speed data transmission and connection redundancy. Teltonika RUTM50
The industrial cellular router uses two 5G modems and supports both SA and NSA architectures. Dual SIM, eSIM, Multi-WAN, load balancing, five Gigabit Ethernet ports, and Wi-Fi 5 support networks requiring high-speed data transmission, redundancy, and multiple independent WAN connections. Teltonika RUTM52
The industrial cellular router provides 5G SA/NSA connectivity with LTE Cat 19 support. Dual SIM, five Gigabit Ethernet ports, dual-band Wi-Fi, GNSS, and USB support integration with industrial, IoT, and redundant network installations. Teltonika RUTM54
No product available!
The industrial cellular router provides 5G, 4G LTE, Wi-Fi 5, and Gigabit Ethernet connectivity. RS232 and RS485 interfaces, Dual SIM, eSIM, and automatic failover support integration with industrial automation systems and equipment using serial communication. Teltonika RUTM55
No product available!
The industrial cellular router integrates two independent cellular modems: one 5G modem and one 4G LTE Cat 4 modem. Dual SIM, eSIM, load balancing, Wi-Fi 5, and five Gigabit Ethernet ports support redundant network architectures in IoT and industrial automation systems. Teltonika RUTM56
The industrial cellular router provides 5G connectivity in both SA and NSA architectures with LTE Cat 19 DL / Cat 18 UL support. Dual SIM, five Gigabit Ethernet ports, GNSS, USB, and industrial communication protocols support deployment in industrial, transport, and IoT systems requiring high-speed and redundant network access. Teltonika RUTM59
No product available!
The industrial wired router provides four Gigabit Ethernet ports together with routing, VLAN, VPN, and network management functions. A quad-core CPU, 256 MB RAM, support for up to 128 VLANs, and RutOS enable deployment in industrial Ethernet networks and IoT infrastructure. Teltonika RUTX08
The industrial cellular router provides 4G LTE Cat 6 connectivity, four Gigabit Ethernet ports, and Dual SIM support. Failover functions, GNSS, USB, and industrial communication protocols support deployment in IoT, automation, and network installations requiring redundant cellular connectivity. Teltonika RUTX09
The industrial cellular router provides 4G LTE Cat 6 connectivity, four Gigabit Ethernet ports, dual-band Wi-Fi 5, and Bluetooth Low Energy. Dual SIM, GNSS, automatic failover, and support for up to 128 VLANs enable deployment in industrial, IoT, and redundant network applications. Teltonika RUTX11
Industrial IoT gateway for communication over LTE 450 networks and integration of automation and technical infrastructure devices with IP networks; 4G LTE Cat 1 up to 10 Mbps download and 5 Mbps upload; 450 MHz band; 2G support; Dual SIM; 1 x Ethernet 10/100 Mbps; RS232; RS485; 3 x configurable digital I/O; 1 x analog input 0-30 V; Modbus TCP/RTU; BACnet/IP and BACnet over RS485; OPC UA; MQTT; DNP3; DLMS/COSEM; VPN; 9-57 VDC power supply; aluminium housing; IP30; operating temperature from -40°C to 75°C. Teltonika TRB236 Cat1 LTE450