zł274.01 tax excl.
Industrial cellular modem for adding mobile connectivity to devices and systems; 4G LTE Cat 4 up to 75 Mbps download and 50 Mbps upload; backward compatibility with 3G up to 42/5.76 Mbps and 2G up to 236.8 kbps; 3GPP Release 9; 1 x Mini SIM; microUSB for data transmission and 5 V power supply; 1 x SMA connector for cellular antenna; aluminium enclosure; IP30; operating temperature from -40°C to 75°C; Windows, Linux and Android support. Teltonika TRM200
Industrial cellular modem designed to add mobile network access to computers, controllers and other devices used in automation, telemetry, IoT systems and industrial installations. Teltonika TRM200 supports 4G LTE Cat 4 with download speeds up to 75 Mbps and upload speeds up to 50 Mbps, while backward compatibility with 3G and 2G enables communication outside LTE coverage. The Mini SIM (2FF) slot supports 1.8 V and 3 V SIM cards, while the SMA connector allows an external cellular antenna to be connected.
The microUSB port provides both data transmission and 5 V power supply, allowing the TRM200 to be integrated directly with computers and industrial equipment equipped with a USB interface. Power consumption remains below 0.9 W when idle and below 3.2 W at maximum load. The anodised aluminium enclosure, IP30 ingress protection rating and operating temperature range from -40°C to 75°C support use in industrial installations, remote monitoring systems, terminals and equipment requiring cellular network access without replacing existing hardware infrastructure.
Compact mounting kit designed for installing compatible Teltonika Networks devices on a standard 35 mm DIN rail. The holder is made of PP FH44 material, while its compact dimensions of 70 x 25 x 14.5 mm facilitate installation of routers, modems, gateways and switches in control cabinets and industrial systems. Teltonika PR5MEC11
Metal mounting kit designed for installing compatible Teltonika Networks devices on a standard 35 mm DIN rail. The holder is made of low-carbon steel, while its dimensions of 65.2 x 44.2 x 1.5 mm allow routers, modems, gateways and switches to be installed in control cabinets, distribution boards and industrial installations. Teltonika PR5MEC00
r cellular routers and modems. Supports frequency ranges of 698-960MHz and 1710-2690MHz, providing 4dBi antenna gain, vertical polarization and 50Ω impedance. Equipped with an SMA male connector and a hinged design allowing adjustable positioning. The antenna measures 197mm in length and features an IP33 protection rating. Teltonika PR1US440
Adhesive LTE antenna designed for use with cellular routers and modems. Supports frequency ranges of 824-960MHz and 1710-2170MHz, providing 2dBi antenna gain and 50Ω impedance. Equipped with a 3m RG174 cable terminated with an SMA male connector. IP50 protection rating and adhesive mounting. Teltonika PR1AS420
Compact LTE rod antenna with a straight SMA male connector, designed for cellular routers and modems. Operates in the 700-2700MHz frequency range, providing 5dBi gain, vertical polarization and 50Ω impedance. The antenna measures 54mm in length. Teltonika PR1CS450
Automotive Ethernet switch for wired networking and powering PoE devices in vehicles; 5 x Gigabit Ethernet 10/100/1000 Mbps; 4 x PoE+ ports; IEEE 802.3af and 802.3at; up to 30 W per port; total PoE power budget of 60 W; 10 Gbps bandwidth; Jumbo Frame support up to 9216 B; Plug and Play; 9-30 VDC power supply directly from 12 V or 24 V vehicle electrical systems; aluminium housing; IP30; operating temperature from -40°C to 75°C. Teltonika TSW101
Industrial Ethernet switch for building wired networks in automation and industrial installations; 5 x Gigabit Ethernet 10/100/1000 Mbps; Layer 2; Plug and Play; 10 Gbps non-blocking bandwidth; 128 KB packet buffer; 2K MAC address table; Jumbo Frames up to 9216 B; passive PoE powering through ETH1; 9-30 VDC power supply; power consumption below 1.8 W; aluminium housing; IP30; operating temperature from -40°C to 75°C. Teltonika TSW110
Industrial Ethernet switch for building wired networks in automation and control cabinets; 5 x Gigabit Ethernet 10/100/1000 Mbps; front-facing Ethernet ports; integrated DIN rail mount; Plug and Play; 10 Gbps non-blocking bandwidth; 128 KB packet buffer; 2K MAC address table; Jumbo Frame support up to 9216 B; passive PoE powering through ETH1; 9-30 VDC power supply; anodised aluminium housing; IP30; operating temperature from -40°C to 75°C. Teltonika TSW114
No product available!
Industrial Ethernet switch for building wired networks and powering PoE devices in automation, monitoring, and industrial installations; 8 x Gigabit Ethernet 10/100/1000 Mbps with PoE+; 2 x SFP ports for fibre-optic connections; IEEE 802.3af and 802.3at; up to 30 W per port; total PoE power budget of 240 W; 20 Gbps non-blocking bandwidth; Jumbo Frames up to 9216 B; 7-57 VDC power supply; aluminium housing; integrated DIN rail mount; IP30; operating temperature from -40°C to 75°C. Teltonika TSW200
The managed industrial network switch provides eight Gigabit Ethernet PoE+ ports and two SFP ports for fibre connectivity. Layer 2 functions, additional Layer 3 capabilities, and industrial communication protocols support deployment in automation, IIoT, and managed Ethernet infrastructures. Teltonika TSW202
The unmanaged network switch provides eight Gigabit Ethernet ports and two SFP ports for fibre connectivity. Plug-and-play operation, DIN-rail mounting, and a wide DC input range support deployment in automation, IoT, and industrial Ethernet networks. Teltonika TSW210
No product available!
The managed industrial Ethernet switch provides eight Gigabit Ethernet ports and two SFP ports for fibre connectivity. Layer 2 management, additional Layer 3 functions, and support for PROFINET, EtherNet/IP, and MRP enable deployment in industrial automation and managed Ethernet networks. Teltonika TSW212
The unmanaged industrial Ethernet switch provides four Gigabit Ethernet ports with data rates up to 1000 Mbps. Its compact enclosure and integrated DIN-rail mounting bracket support installation in control cabinets and other space-constrained industrial environments. Teltonika TSW304
Industrial I/O controller with a built-in MQTT gateway for equipment monitoring and data transmission to IoT systems; RP2350 microcontroller running at 150 MHz; RJ45 Ethernet; isolated RS485 interface with Modbus RTU support; 11 digital inputs, 4 digital outputs and 2 analog 12-bit inputs; configuration through a web browser without programming; 10 V to 30 V DC power supply; dimensions of 140 x 60 x 36 mm. Cytron IRIV-IOC-MQTT
Compact mounting kit designed for installing compatible Teltonika Networks devices on a standard 35 mm DIN rail. The holder is made of PP FH44 material, while its compact dimensions of 70 x 25 x 14.5 mm facilitate installation of routers, modems, gateways and switches in control cabinets and industrial systems. Teltonika PR5MEC11
Metal mounting kit designed for installing compatible Teltonika Networks devices on a standard 35 mm DIN rail. The holder is made of low-carbon steel, while its dimensions of 65.2 x 44.2 x 1.5 mm allow routers, modems, gateways and switches to be installed in control cabinets, distribution boards and industrial installations. Teltonika PR5MEC00
Cable designed for powering and using input/output lines in compatible Teltonika Networks devices. One end features a 4-pin connector with 3 mm pitch, while the other is equipped with a 4-way screw terminal for solderless connections. The cable length is 2 m. Teltonika PR2FK20M
Roof-mount LTE MIMO antenna designed for use with compatible Teltonika Networks routers and devices. It supports frequency ranges of 698-960 MHz and 1710-2690 MHz, while two 3 m RG174 cables are terminated with SMA Male connectors. The housing has an IP65 ingress protection rating, excluding the cable outlet, and is UV resistant. Teltonika PR1KCL25
Makerbase MKS DLC32 controller for laser engravers and CNC machines, featuring an ESP32-WROOM-32U module running at up to 240 MHz, 8 MB Flash memory and 520 KB RAM. Supports WiFi connectivity, control via a web browser and mobile application, and compatibility with LaserGRBL and LightBurn software. Includes stepper motor connectors, a laser control output, a microSD card slot and a 12–24 V DC power input. Makerbase MKS DLC32
AI camera for local processing of images, audio, and sensor data in Edge AI systems. The reCamera Pro 2GB features a Rockchip RV1126B processor with a 3 TOPS NPU, 2 GB of RAM, 16 GB of eMMC storage, and an 8 MP SC850SL sensor capable of capturing 4K video. It supports object recognition, VLM, LLM, and speech processing models, as well as RTSP, RTMP, ONVIF, MQTT, and HTTP protocols. Provides 1 Gb/s Ethernet, dual-band WiFi, Bluetooth 5.4, and CAN, UART, and GPIO interfaces. Designed for intelligent surveillance, industrial automation, and IoT systems. Seeed Studio 100092895
WiFi rod antenna designed for routers, access points and networking devices operating in the 2.4GHz band. Supports frequencies of 2400-2483MHz, providing 5dBi antenna gain, vertical polarization and 50Ω impedance. Equipped with an RP-SMA male connector and a hinged design allowing 90° positioning. Overall length of 195mm and IP33 protection rating. Teltonika PR1URF51
Industrial cellular modem for adding mobile connectivity to devices and systems; 4G LTE Cat 4 up to 75 Mbps download and 50 Mbps upload; backward compatibility with 3G up to 42/5.76 Mbps and 2G up to 236.8 kbps; 3GPP Release 9; 1 x Mini SIM; microUSB for data transmission and 5 V power supply; 1 x SMA connector for cellular antenna; aluminium enclosure; IP30; operating temperature from -40°C to 75°C; Windows, Linux and Android support. Teltonika TRM200