KAmodRPi Pico Extension - expansion board for Raspberry Pico RP2040
ID: 586681
5906623432851
zł29.91
Tax included
zł24.32 tax excl.
The expansion board for the Raspberry Pi Co allows you to connect to Pico HAT overlays designed for full-size Raspberry boards, and KAmod I2C series modules.
Description
Expansion board for Rasperra Pico, allows you to connect to Pico overlays intended for full-size Raspberry boards and a module in the KAmod I2C series.
Disclaimer!
The set does not include a plate Raspberry Pico and must be purchased separately.
The set does not include a plate Raspberry Pico and must be purchased separately.
Properties
- 40-pin GPIO connector to connect the HAT module
- 328 hole universal board for easy prototyping
- 2x20 pin Pico pin extension connector
- KAMAMI I2C connector for connecting many modules in the KAmod series
- RESET button
- Dimensions: 71 x 112 mm
586681
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Module with digital thermal sensor, thermostat and I2C interface
zł24.90
24h
Available quantity: 190
Available
A 30 cm long connecting cable (4 wires) designed for use with Kamami KAmod modules. It is terminated on both ends with a plug that fits the WF04S connector that KAmod modules are equipped with. cabhu04-30
zł6.90
Delivery date unknown
No product available!
Available
Pressure sensor module with I2C interface (MPL115A2)
zł44.90
24h
Available quantity: 19
Available
Pressure sensor module with I2C interface (BMP085)
zł74.89
24h
Available quantity: 5
Available
Module with L3G4200D (3-axis gyroscope with digital output)
zł34.90
24h
Available quantity: 4
Available
Relay output module for Raspberry Pi 4B, Pi 3B+ Pi3B, Pi2, Pi+, Pi minicomputers.
zł49.00
24h
Available quantity: 152
Available
KAmodLSM303C is a module with the MEMS LSM303C chip from STMicroelectronics. The chip has a digital signal output (I2C or SPI bus) and allows measurement of accelerations and magnetic field values in three axes
zł37.90
24h
Available quantity: 413
Available
KAmodMPL3115A2 is a module with an atmospheric pressure sensor MPL3115A2 from NXP. Sensor allows to make a measurement in the range of 200...1100hPa (20...110kPa). Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMPL3115A2
zł27.90
24h
Available quantity: 203
Available
KAmodMMA8451Q is a module with the MMA8451Q three-axis accelerometer from NXP. The sensor allows the measurement of acceleration in the range of ±2g/±4g/±8g, the measurement frequency is from 1.56 Hz to 800 Hz. Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMMA8451Q
zł24.90
24h
Available quantity: 240
Available
KAmodMAG3110FC is a module with magnetic field sensor MAG3110FC from NXP. The sensor measures the magnetic field in the range of ±1000μT, with a resolution of 0.1μT. Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMAG3110FC
zł24.90
24h
Available quantity: 354
Available
Module with NXP temperature sensor. It allows you to measure temperature in the range from -55 °C to +125 °C. I2C interface. The board is equipped with a Pmod I2C standard connector and a KAMAMI connector
zł17.90
24h
Available quantity: 418
Available
KAmodMMA8653FC is a module with NXP's MMA8653FC three-axis accelerometer. The sensor allows the measurement of acceleration in the range of ± 2g / ± 4g / ± 8g, the measurement frequency is from 1.56 Hz to 800 Hz. Communication with the sensor takes place via the I2C interface
zł26.90
24h
Available quantity: 460
Available
Module with DS18B20 temperature sensor from Dallas Semiconductor. The sensor used allows you to measure temperatures in the range -55 ~ 125 ° C with an accuracy of ± 0.5 ° C (in the range of -10 ~ 85 ° C). The 1-Wire interface is used for communication. The plate is equipped with a goldpin connector and a KAMAMI connector, allowing easy connection of the module to the commissioning kits.
zł13.90
24h
Available quantity: 407
Available
KAmodPCA9533 is a module with LED driver from NXP. The module allows you to control the brightness of 4 LEDs using programmable PWM signals (with a frequency from 0.591 Hz to 152 Hz). I2C interface. The board is equipped with a Pmod I2C standard connector and a KAMAMI connector
zł21.89
24h
Available quantity: 235
Available
KAmodM41T82 is a module with the STMicroelectronics M41T82 RTC clock. The chip allows precise timing, and an additional battery connector allows you to maintain the power supply when the main power is turned off. Communication with the module is realized via I2C bus.
zł31.49
24h
Available quantity: 474
Available
KAmodLIS35DE is a module with a three-axis LIS35DE accelerator from STMicroelectronics. The chip has a digital signal output (I2C or SPI bus) and allows acceleration measurement in three axes.
zł19.90
24h
Available quantity: 474
Available
zł5.90
24h
Available quantity: 480
Available
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
zł19.31
24h
Available quantity: 968
Available
Four relay output module for Raspberry Pi 4B, Pi 3B+ Pi3B, Pi2, Pi+, Pi minicomputers.
zł38.35
24h
Available quantity: 123
Available
KAmodMC3635 is a module with the MC3635 three-axis accelerometer from mCube. The sensor allows the measurement of acceleration in the range of ±2g/±4g/±8g/±12g/±16g, the measurement frequency is from 14 to 1300 Hz. Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMC3635
zł14.90
24h
Available quantity: 454
Available
Starter kit containing Raspberry Pi Pico, necessary connectors and a microUSB cable. The kit is recommended for people programming in MicroPython
Regular pricezł29.90zł25.90
24h
Available quantity: 8
Available
The KAmodPCAL6408 is an 8-bit I/O expander with the PCAL6408A chip by NXP, controlled by the I2C interface.
zł16.90
24h
Available quantity: 413
Available
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Version with soldered connectors. Raspberry Pi SC0917
zł23.90
24h
Available quantity: 182
Available
Other products in the same category (16)
A pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets of male strips 2x20 pins. SB Components 21314
zł53.76
24h
Available quantity: 2
Available
A pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and four sets of male strips 2x20 pins. Pimoroni PIM555
zł78.76
4 weeks
No product available!
A pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets (one male and one female) of 2x20 pin strips. SB Components 20812
zł45.57
24h
Available quantity: 2
Available
A pin expander for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets of male strips 2x20 pins. Waveshare Pico-Dual-Expander
zł28.49
24h
Available quantity: 8
Available
A pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets (male and female) of 2x20 pins. DFRobot DFR0836
zł18.94
24h
Available quantity: 5
Available
A pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets of male strips 2x20 pins. Pimoroni PIM556
zł49.32
24h
Available quantity: 3
Available
A set with a 64 MP camera and an adapter enabling the transmission of the CSI signal via an HDMI cable. Designed for Raspberry Pi and Jetson Nano minicomputers. The adapter module is also equipped with an audio connector and allows you to connect a microphone and headphones. ArduCAM B0399B0091
zł356.61
4 weeks
No product available!
A pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and four sets of male strips 2x20 pins. SB Components 21352
zł76.95
24h
Available quantity: 1
Available
Base board designed for Raspberry Pi Pico. Equipped with numerous connectors, audio output, buzzer, micro SD slot, buttons and LEDs. Cytron MAKER-PI-PICO-NB
zł43.22
24h
Available quantity: 9
Available
Adapter with a DVI connector designed for the Raspberry Pi Pico. It can transmit DVI-D video signal. Pico DVI Sock
zł34.59
24h
Available quantity: 3
Available
Universal expansion board with screw connectors dedicated to Raspberry Pi Pico. Facilitates the creation of device prototypes
zł88.67
24h
Available quantity: 1
Available
Pin expander for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets of 2x20 pin male strips. SB Components 20836
zł61.12
24h
Available quantity: 3
Available
Pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and an additional set of female 2x20 pin strips. Kitronik 5341
zł19.02
Delivery date unknown
No product available!
An expansion board designed for the Raspberry Pi Pico. The board has 13 GPIO pins, 3 ADCs, UART, I2C and SPI interfaces. The pins are color coded according to the Gravity standard. DFRobot DFR0848
zł32.69
24h
Available quantity: 19
Available
Expander with two I2C connectors and one SPI for Raspberry Pi Pico. It has sockets compatible with Pimoroni Breakout modules. Pimoroni PIM547
zł45.26
24h
Available quantity: 1
Available
A pin expander for Raspberry Pi Pico boards. It is equipped with a standard female connector and four sets of male strips 2x20 pins. Waveshare Pico-Quad-Expander
zł40.65
24h
Available quantity: 5
Available
The expansion board for the Raspberry Pi Co allows you to connect to Pico HAT overlays designed for full-size Raspberry boards, and KAmod I2C series modules.