RFM22B-868S2 - 868MHz RF transceiver module
ID: 1188821
zł23.37
Tax included
zł19.00 tax excl.
Long-range Sub-GHz wireless RF transmitter and receiver module, capable of operating in the 868 MHz frequency band. The integrated architecture allows the use of a minimum number of external components while maintaining maximum design flexibility. Hoperf RFM22B-868S2
Description
RFM22B is an integrated ISM transceiver module operating on the 868 MHz frequency band. Its low receive sensitivity (-121 dBm) combined with industry-leading output power of +20 dBm provides extended range and improved link performance. Built-in antenna diversity and frequency hopping support can be used to further increase range and enhance performance.
Additional system features such as automatic wake timer, low battery detector, 64-byte FIFO TX/RX, packet handling, and preamble detection reduce overall power consumption and allow for the use of cheaper MCUs in the system. Integrated temperature sensor, general-purpose ADC, power-on reset (POR), and GPIO further lower costs and system size.
The digital receive architecture of RFM22B includes an ADC and DSP-based modem that performs demodulation, filtering, and packet handling, increasing flexibility and performance. Direct digital transmit modulation and automatic PA power ramping provide precise transmit modulation and reduced spectral spreading, ensuring compliance with global regulations including FCC and ETSI.
Features
- Frequency range: ISM 868 MHz
- Sensitivity: -121 dBm
- Output power range:
- Max. +20 dBm (RFM22B)
- Max. +13 dBm (RFM23B)
- Low power consumption:
- 18.5 mA in receive mode
- 30 mA @ +13 dBm in transmit mode
- 85 mA @ +20 dBm in transmit mode
- Data transmission rate: from 0.123 to 256 kbps
- Modulation: FSK, GFSK, and OOK
- Supply voltage: from 1.8 to 3.6 V
- Ultra-low power shutdown mode
- Digital signal strength indicator (RSSI)
- Wake timer
- Automatic frequency calibration (AFC)
- Power-on reset (POR)
- Antenna diversity and TR switch control
- Configurable packet handler
- Preamble detection
- 64-byte FIFO TX and RX buffers
- Low battery detector
- Temperature sensor and 8-bit ADC
- Operating temperature range: -40 to +85 °C
- Integrated voltage regulator
- Frequency hopping capability
- Dimensions: 16 x 16 mm
1188821
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
A long-range RF sub-GHz wireless transceiver module capable of operating in the 433 MHz frequency band. The integrated architecture allows the use of a minimum number of external components with maximum design flexibility. RFM69HW433
zł17.70
Delivery date unknown
No product available!
A long-range RF sub-GHz wireless transceiver module capable of operating in the 868 MHz frequency band. The integrated architecture allows the use of a minimum number of external components with maximum design flexibility. RFM69HW868
zł45.73
24h
Available quantity: 15
Available
Long-range Sub-GHz wireless RF transmitter and receiver module, capable of operating in the 433 MHz frequency band. The integrated architecture allows the use of a minimum number of external components while maintaining maximum design flexibility. Hoperf RFM69HW-433S
zł18.91
24h
Available quantity: 5
Available
Other products in the same category (16)
Radio receiver module operating at 433 MHz. It is equipped with Gravity connectors and communicates via a digital interface. DFRobot TEL0142
zł37.27
24h
Available quantity: 1
Available
Module with 2.4 GHz transceiver system (transmitter and receiver) LT892. It is powered with the voltage of 3.3 V and has a built-in antenna
zł5.67
24h
Available quantity: 17
Available
Wireless transceiver operating in the 915MHz band based on the RFM69HCW chip with a maximum power of 100mW and a transmission speed of up to 300kbps. The range in open space is up to 500m. The module communicates via the SPI bus. Arduino compatible. modRFM69HCW_915MHz
zł23.28
4 weeks
No product available!
Expansion board for STM32 Nucleo based on S2-LP RF transmitter operating in 868MHz band. The expansion board is compatible with ST morpho and Arduino UNO R3 connectors. STMicroelectronics X-NUCLEO-S2868A2
zł161.81
24h
Available quantity: 3
Available
The modRemProg remote control operating at 433 MHz enables cloning of fixed-code remote signals, supporting up to four devices. It is suitable for controlling gates, doors, and alarm systems, offering a simple programming procedure and a compact, durable design.
zł13.90
24h
Available quantity: 6
Available
HAT module with RFM95W 433 MHz system for LoRa / LoRaWAN communication and OLED display, designed for Raspberry Pi minicomputers. Adafruit 4075
zł200.64
24h
Available quantity: 1
Available
Module with nRF24L01 + transceiver, power amplifier and antenna with 2dBi gain, 1000m, 2Mb / s, RoHS
zł12.88
4 weeks
No product available!
2.4 GHz RF module with nRF24L01+ chip. The module has an RP-SMA connector with reverse polarity, allowing the connection of an external antenna. The system has a built-in 3.3 V stabilizer and IO lines with a tolerance of 5 V. SparkFun WRL-00705
zł155.41
24h
Available quantity: 1
Available
WIFI-LPT100 Eval Kit module enables UART data transmission via WiFi, ultra low power consumption, encrypted communication
zł110.76
4 weeks
No product available!
Module with a 433 MHz radio receiver for M5Stack sets. Based on the SYN531R chip, it has a built-in PCB antenna. M5Stack U113
zł24.93
24h
Available quantity: 1
Available
modNRF905 is a versatile RF transceiver module operating in three ISM bands, ideal for remote communication between devices in IoT systems, automation, and remote control. With low power consumption, fast channel switching, and an included antenna, it provides stable and energy-efficient wireless connections.
zł19.90
4 weeks
No product available!
A GFSK transceiver operating in the ISM 2400 ... 2483.5 MHz frequency range. Powered by a voltage of 1.9 ... 3.6 V, the pins are goldpin connectors. It has a built-in PCB antenna. HOPE MICROELECTRONICS RFM75-S
zł5.50
24h
Available quantity: 5
Available
DFRobot 315MHz RF receiver module using SC2272-L4 low power decoder chip. DFRobot TEL0112
zł33.97
24h
Available quantity: 1
Available
A set with a radio transmitter and receiver operating at 433 MHz. The modules are equipped with Grove connectors and communicate via a digital interface. Seeed Studio 104020002
zł62.15
24h
Available quantity: 2
Available
A wireless transceiver operating in the 434 MHz band based on the RFM69HCW system. Maximum power: 100mW; bit rate up to 300kbps. Range in the open space reaches up to 500m. The module communicates using the SPI bus. Compatible with Arduino
zł15.04
24h
Available quantity: 17
Available
Available
Long-range Sub-GHz wireless RF transmitter and receiver module, capable of operating in the 868 MHz frequency band. The integrated architecture allows the use of a minimum number of external components while maintaining maximum design flexibility. Hoperf RFM22B-868S2