New products
New products New products
zł259.00
Delivery date unknown
Available
zł50.18
24h
Available
434 MHz wireless transceiver module
ID: 561856
5906623455393
zł14.24
Tax included
zł11.58 tax excl.
A wireless transceiver operating in the 434 MHz band based on the RFM69HCW system. Maximum power: 100mW; bit rate up to 300kbps. Range in the open space reaches up to 500m. The module communicates using the SPI bus. Compatible with Arduino
Description
A wireless transceiver operating in the 434 MHz band based on the RFM69HCW system. It works on frequencies in the unlicensed ISM band. Maximum power: 100 mW; bit rate up to 300 kbps. Range in the open space reaches up to 500 meters. The module communicates using the SPI bus. Compatible with Arduino .
properties
- +20 dBm; 100 mW maximum power output
- High sensitivity: -120 dBm with a bandwidth of 1.2 kbps
- High selectivity: FIR row 15 filter per channel
- IIP3 = -18 dBm
- IIP2 = +35 dBm
- Low power consumption: Rx = 16 mA
- Programmable output power in the range -18 ... + 20 dBm with a step of 1 dBm
- The maximum bit rate in FSK mode is 300 kbps
- Integrated synthesizer with 61 Hz resolution
- Modulations FSK, GFSK, MSK, GMSK and OOK
- Built-in synchronizer with clock regeneration
- Signal dynamics: 115 dB + RSSI
- Built-in temperature sensor
561856
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Feather board will let you integrate packetized radio (with the RFM69 radio) or LoRa radio (with the RFM9x\'s). These radios are good options for kilometer-range radio, and paired with one of our WiFi, cellular or Bluetooth Feathers, will let you bridge from 433/900MHz to the Internet or your mobile device. Adafruit 3230
zł53.91
24h
Available quantity: 1
Available
Other products in the same category (16)
Crowtail – 315MHz RF Receiver with Transmitter 2.0 is a simple set for one-way wireless communication in the 315 MHz band, intended for remote control, automation, and IoT projects. Easily integrated with Arduino systems via the Crowtail interface.
zł20.89
24h
Available quantity: 5
Available
Adapter with 3.3V voltage regulator designed for NRF24L01 modules with 8-pin connector
zł4.74
4 weeks
No product available!
The module enables remote control of four independent devices using the 433 MHz band. Simple configuration of operating modes and the ability to tune the receiver make the set suitable for automation, lighting systems, and remote control of devices.
zł27.66
24h
Available quantity: 1
Available
Module with a radio receiver operating at 315 MHz for Arduino. DFRobot TEL0075
zł33.73
24h
Available quantity: 1
Available
A set with a radio transmitter and receiver operating at 315 MHz. The modules are equipped with Grove connectors and communicate via a digital interface. Seeed Studio 113020001
zł50.26
24h
Available quantity: 2
Available
Module with nRF24L01 + transceiver, power amplifier and antenna with 2dBi gain, 1000m, 2Mb / s, RoHS
zł12.88
4 weeks
No product available!
Wireless data transmission module operating at 433 MHz. It is powered with the voltage of 12 V
zł6.65
24h
Available quantity: 7
Available
Module with 2.4 GHz transceiver system (transmitter and receiver) LT892. It is powered with the voltage of 3.3 V and has a built-in antenna
zł5.67
24h
Available quantity: 9
Available
DFRobot 315MHz RF receiver module using SC2272-L4 low power decoder chip. DFRobot TEL0112
zł33.97
24h
Available quantity: 1
Available
Wireless switch operating at 433 MHz frequency. It does not require a power supply. DFRobot TEL0146
zł44.65
24h
Available quantity: 2
Available
Available
modNRF905 is a versatile RF transceiver module operating in three ISM bands, ideal for remote communication between devices in IoT systems, automation, and remote control. With low power consumption, fast channel switching, and an included antenna, it provides stable and energy-efficient wireless connections.
zł19.90
4 weeks
No product available!
6-channel transmitter (RC apparatus) 2.4 GHz Flysky FS-i6 with LCD display in set with receiver FS-IA6 with telemetry support. 6V power supply (4 x AA battery). Left-hand throttle (right-handed version). Flysky FS-i6
zł252.88
4 weeks
No product available!
NRF24L01 module with USB type A connector. It has a built-in antenna and a USB converter. Allows you to design and test 2.4 GHz radio communications using a PC
zł45.25
24h
Available quantity: 3
Available
Radio module with the RFM69HCW (868 MHz or 915 MHz) system, designed to work with the Raspberry Pi. Equipped with an OLED display and buttons. Adafruit 4072
zł110.65
24h
Available quantity: 1
Available
A long-range RF sub-GHz wireless transceiver module capable of operating in the 868 MHz frequency band. The integrated architecture allows the use of a minimum number of external components with maximum design flexibility. RFM69HW868
zł45.73
24h
Available quantity: 15
Available
A wireless transceiver operating in the 434 MHz band based on the RFM69HCW system. Maximum power: 100mW; bit rate up to 300kbps. Range in the open space reaches up to 500m. The module communicates using the SPI bus. Compatible with Arduino